Question about 2000 BMW 3 Series

Open Question

Display panel not working - 2000 BMW 3 Series

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause the interment panel to quit working on a 2004 Toyota Matrix


The instrument panels on newer cars are really computer modules, the displays are computer generated, so when this type of problem occurs you must remove the cluster display and have it rebuilt. Check online for repair facilities, they will provide instructions on removal of the panel from the car and a shipping container to send it in for repair, cost about $250.00 USD

Oct 07, 2016 | 2004 Toyota Matrix

1 Answer

1994 Chevy Caprice-Display problem


Take it back to the place you bought it. It wasn't working after they worked on the vehicle (but it was before)so they are responsible for fixing it. (At least in the UK)

Apr 30, 2013 | 1994 Chevrolet Caprice Classic

1 Answer

I have a 99 ford windstar that the radio display does not work in. I was told that there were 2 fuses for it,but i do not have the fuse diagram or owners manual. Can you help me out with this.? Thanks.


The radio display gets power from the instrument panel. If your instrument panel illumination works but radio illumination doesn't, the problem is with the radio

Jan 18, 2013 | Cars & Trucks

3 Answers

AC display panel light 2000 Chrysler lhs is not displaying


I how mines open right now, the bulbs are inside the buttons, not the display, its the display thats not works & there arent any bulbs, its just a thin peace of glass

Sep 27, 2011 | 2000 Chrysler LHS

1 Answer

My dash board milage light does not display


Probably a bad solder connection on the instrument panel between the led display and the circuit board itself. Instrument panel needs to be removed for this proceedure. Remove the back cover from the circuit board and carefully remove the circuit board to access the led display. Carefully lift up the display and look to see if any of the solder joints from the solder legs are loose. resolder as needed. Plug the circuit board in the dash and turn on the key to see if it works.

Apr 11, 2011 | 1999 Chevrolet K1500

1 Answer

Radio Display is not working but radio does work


Same thing happend to me, on a Taurus. There is a tiny light bulb inside the radio that shines behind the display panel. It was a real pain to get this out, and to replace it. I used a flashlight to shine on to the front of the display to "see" what station I was on, or etc.

To get this led panel to work on your radio, plan on pulling the radio out, and taking the top panel off. Once its off, just look directly behind the lcd panel, and there is a plug, it goes in like a healight bulb, just turn it 1/4 turn, and pull out. Take bulb to local radio shack, or automotive store, to match a replacement to. Good luck!

Jan 03, 2011 | 1991 Ford F150

1 Answer

I have a subaru liberty 2003, the display panel sh...


Drop me a note if you are still interested in getting this fixed. I may have the solution for this.

May 19, 2010 | 2005 Subaru Legacy

1 Answer

95 mazda millenia a/c climate control, clock,and outside temp dis


i would just get a used one off ebay. usually you can find the dash with the a/c amp(pushbuttons) and the display for around 40 bucks. they are separate units(display and amp), and are mounted with screws that go into the back of the dash panel. the dash panel is easy to remove, there are 2 anchor screws on either side of the steering column. right side is under a plastic cover, the other is under the rheostat, just carefully pry them out, and you will see the screws. then the whole dash part pops out. you will need to disconnect the harness's that plug into the back of the amp, then it all comes free. it might help to put the steering wheel in the lowest position.

Sep 01, 2009 | 2000 Mazda Millenia

1 Answer

Climate Control Problem


I had the same problem. Push the top right corner of the panel surrounding the LED display hard and see if it works again. If it does, disassemble and the reassemble the panel and it should be working again. It worked for me. I hope this helps.

Jun 04, 2009 | 1999 Dodge Intrepid

2 Answers

AC display panel lights


You will need to replace the whole in-dash A/C control unit. Changing the small bulb won't rectify your problem, as the display is LCD.

Mar 12, 2009 | 2001 Chrysler 300M

Not finding what you are looking for?
2000 BMW 3 Series Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...