Question about 2003 Audi A4 Cabriolet

Open Question

P0735 code error code P0735

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How i fix the p0730 and p0735 in range rover 2006


Possible causes of OBD code P0730
- Low transmission fluid level - Dirty transmission fluid - Shift solenoids - Shift solenoids harness or connectors - Transmission mechanical problems - Transmission hydraulic control circuit The Error code is generally activated on detection of the following conditions: The TCM has detected that the transmission is trying to mechanically shift to a lower gear than intended

Possible causes of OBD code P0735
- Low transmission fluid level - Dirty transmission fluid - Shift solenoids - Transmission mechanical problems - Transmission hydraulic control circuit The Error code is generally activated on detection of the following conditions: P0735 is detected when A/T cannot be shifted to the 5th gear position even if electrical circuit is good.

Dec 24, 2014 | 2006 Land Rover Range Rover

1 Answer

Hey I have a ford explorer 2006 and it keep saying trans code p0735 what that means ?


code p0735 refers to gear 5 --incorrect ratio.===causes --wiring---TR sensor / switch---shift solenoids--transmission mechanical fault. I would be replacing the TR sensor/ switch first. IF it looks like a transmission mechanical fault Have pressure test done first and check the bands and clutch adjustments before considering a replacement/ over haul. I feel confident it is a electronic fault

Jan 23, 2014 | Cars & Trucks

1 Answer

I have error codes p0735, 0732 and0775 has possible worn o/d band


I would say you are looking at a transmission rebuild here.

Aug 29, 2012 | 2002 Ford Explorer

1 Answer

HI i Scanned my Ford Explorer to a computer and i got codes P0732 and P0735 can i get a little info about the codes and how to fix the problem


P0735 FORD - Automatic Transmission Incorrect Fifth Gear Ratio Incorrect Possible causes - Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

P0732 FORD - Automatic Transmission Incorrect Second Gear Ratio Incorrect All - causes would be the same as above with ALSO Probable bad valve body - and or pressure solenoids. Probable bad clutch band. If the fluid is ok and if you have tried changing the fluid and filter to no aval. Is it time to think about a transmission repair at a local transmission shop. Sorry.

Sep 12, 2011 | Ford Explorer Cars & Trucks

1 Answer

What are possible causes for the code po735 on a 99 Audi A8?


Hi,
For the Audi A8 code P0735 "Gear 5 Ratio incorrect" is a transmission problem and should be taken to a transmission shop that you trust. Have a good day.

Mar 18, 2011 | Audi A8 Cars & Trucks

2 Answers

Code po734, po735


This is what your codes mean:

Trouble Code-P0734 (A/T Additional Gear Ratio Error In Fourth Gear)


Trouble Code Conditions:
Vehicle driven to a speed of 4-37 mph at more than 500 rpm, gear selector in 4th Gear in Drive, and the PCM detected too much difference in the engine speed and output shaft speed.

Possible Causes:

  • Customer may complain of intermittent 4th gear operation
  • O/D and 2/4 pressures less than 75 psi
  • O/D or 2/4 clutch volume indexes out of specification
  • O/D accumulator seals are damaged
  • Transmission enters "limp in" mode running in 4th gear

Trouble Code-P0735 (A/T Gear Ratio Error Fourth Prime)

Trouble Code Conditions:
Vehicle driven any forward Gear, and the TCM detected the ratio of the Input speed to the Output Speed did not match the current Gear Ratio (this test can take up to 5 minutes).

Possible Causes:

  • Related Gear Ratio trouble codes may be stored (note that some of these Gear Ratio trouble codes may be intermittent)
  • Transmission has internal problems or damage present
You have a transmission problem.

Jan 17, 2011 | 2003 Dodge Durango

1 Answer

2002 FREELANDER P0735 FAULT, CAN FIND NO PROBLEM BUT RESETS EVERY TIME YOU GO TO 5TH GEAR


P0735- 5th gear ratio invalid, means there is a mechanical problem on the transmission

Sep 02, 2010 | 2002 Land Rover Freelander

1 Answer

1997 Ford ExploreR with the following codes P1762, P0732 and P0735


p0732
incorrect gear ratio,second gear

p0735
incorrect gear ratio, fifth gear

p1762
are you sure this is the code number it is a manufacturer-specific code. and i'm not seeing it in my bood check to see if you have the right numbers on it.

Aug 21, 2010 | 1998 Ford Explorer

Not finding what you are looking for?
2003 Audi A4 Cabriolet Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...