Question about 2010 Nissan Navara 2.5

Open Question

FAULT CODE p0488

EGR FAULT CODE

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Nissan Juke is showing a fault code P0488 I know what it is just not sure how too fix


You will get
your solution and all info on service info, repair info, parts info, wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV, , owner's/service/repair/parts/maintenance manuals etc everything
this website www.reliable-store.com
it's a very good website for vehicle problems even as old as 1991 ford..

Mar 19, 2018 | Nissan Cars & Trucks

1 Answer

I have a 0402 fault code on my 16 hid xsara what does that mean?


OBD II Fault Code
  • OBD II P0402
Fault Code Definition
  • Excessive EGR Flow
Symptoms
  • Check Engine Light will illuminate
  • In most cases, there are no adverse conditions noticed by the driver
  • In some cases, there may be performance problems, such as dying at stop signs or rough idling, hesitation, misfires or lack of power (especially during acceleration), and a decrease in fuel economy
Common Problems That Trigger the P0402 Code
  • Excessive Vacuum signal or Electrical signal to the EGR Valve
  • The EGR Valve is defective and is opening too far or not properly closing
  • Lack of proper EGR system feedback to the computer from the:
    • Manifold Absolute Pressure Sensor (MAP)
    • EGR Temperature Sensor
Common Misdiagnoses
  • Ignition System
  • Fuel System
  • Oxygen Sensor
  • EGR Valve

Oct 31, 2016 | Cars & Trucks

1 Answer

2005 suzuki forenza code P0488


P0488 Exhaust Gas Recirculation Throttle Position Control Range/Performance
EGR failure.
clean it and test it.

Mar 22, 2013 | Suzuki Forenza Cars & Trucks

2 Answers

Egr fault code p0401


Hi there:

In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.

  • Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
  • Clean out the EGR valve and/or tubing to remove deposits
  • Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
  • Replace the DPFE sensor (with a good quality / OEM one)
  • Replace the EGR valve


Hope this helps.

Dec 06, 2012 | Cars & Trucks

1 Answer

98 f150engine light keeps coming on for egr valve have replaced but light still comes on with same code


The light and the code it represents mean a problem in the EGR control or flow, it doesn't indicate a certain part is defective, this is a commonly misunderstood meaning of modern fault codes. That is why we techs go through years of training on diagnosing the fault codes. I will need the fault code to provide any more help, but that will just be a guess based on my 25 years as a Ford dealer service technician.

Sep 17, 2012 | Cars & Trucks

1 Answer

P0488 fault code on a 2008 outlander


just had this on my 2007 2.0 did outlander, replaced the egr throttle body which cleared fault code p0487 which i also had, but p0488 was a little more tricky to find out what it was, after searching the internet i checked the fuses, sure enough a 15a fuse had blown, about 6th from the right as you look at the fuse box with an engine symbol identifyng it. changed the fuse cleared the fault code job done, it seems a broken egr throttle body will blow this fuse according to my research. hope this helps someone.

Jul 10, 2012 | Mitsubishi Cars & Trucks

4 Answers

Grand carvan gives p402 code


This is not a cut and dry fault code. This means that more than one thing wrong can set the code in the computers memory. Here is the low down on the P0402 fault code. This is from the OBD2 fault code diagnostic book.

P0402 - Exhaust Gas Recirculation Flow Excessive Detected
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Possible engine hesitation
Possible causes - EGR solenoid valve harness is open or shorted
- EGR solenoid valve circuit poor electrical connection
- EGR volume control valve stuck closed
- Dead (Weak) battery
- Faulty EGR temperature sensor and circuit
- Faulty EGR Valve
- EGR passage clogged
- Exhaust gas leaks

Jan 18, 2012 | Cars & Trucks

1 Answer

What does "EGR Error" OBD11 code 01 2D mean for a


You have to change the EGR valve. (exhaust gas recirculating valve) It's giving wrong parameters to the ECU.

Jul 05, 2011 | 2011 Hyundai Equus

1 Answer

2005 Suzuki Forenza, check engine light is on with fault codes reading P0488 and P0496. Can't get a good explanation of what the cause may be. Any insight would be greatly appreciated.


code P0488 exhaust gas recirculation closed valve pintle error ( EGR Valve ) most likely replace the valve.

code P0496 evaporative emission system continuous purge flow. could be many things, Gas cap, purge valve , purge canister, probably need to have this one check by the dealer.

Jul 01, 2011 | 2005 Suzuki Forenza

2 Answers

Toyota 4runner 1994 engine codes 12,52,71 what are these


Code 12 Engine revolution signal missing
Code 52 Knock sensor fault
Code 71 EGR system malfunction

May 04, 2011 | Toyota 4Runner Cars & Trucks

Not finding what you are looking for?
2010 Nissan Navara 2.5 Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

80417 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...