Question about 2012 Hyundai Veloster

Open Question

Touchscreen calibration - 2012 Hyundai Veloster

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2007 checy impala read "calibration complete" what does that mean ????


CALIBRATION COMPLETE
Refer to Electronic Compass Calibration do you have an owners manual ?
Compass Calibration
The compass direction will show CAL if it needs to be calibrated. Before calibrating the compass, drive the vehicle to an area that is magnetically clean (free of large metallic objects).
  1. Turn ON the ignition.
  2. Before calibrating the compass, make sure the compass is set to the variance zone in which the vehicle is travelling. See Compass Magnetic Variation Adjustment below.
  3. Press the vehicle information button until the PRESS TO CALIBRATE COMPASS screen is displayed.
  4. Press the set/reset button to start the compass calibration.
  5. The DIC will display CALIBRATING: DRIVE IN CIRCLES. Drive the vehicle in circles at less than 8 km/h (5 mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE when the calibration is complete.

Oct 02, 2016 | 2007 Chevrolet Impala

1 Answer

We got these diagnostic codes P1AOC and P1289, need info on these. Engine light came on and diagnostic ran showed these codes. Thank you.


Reprogram the powertrain control module(PCM) to the latest calibration using IDS release 62.14 or higher and 63.02 or higher. Calibration files are not included on DVD 2009.9. Calibration files may also be obtained at the website.

Mar 21, 2015 | 2009 Ford Escape Hybrid

1 Answer

New t880 tractors keep showing a calibration memory fault code. need helping figuring out what that means


On a new unit, the memory spaces for past calibrations are empty. The calibration memory gets filled during early operations and then the error should go away.

Mar 02, 2015 | Cars & Trucks

1 Answer

Replace MAF sensor 1995 ford ranger 6 cyl 3.0L-can't find calibration number required for parts


in the driver door jamb near the striker there should be a sticker with calibration code it should look like this.
11111ae4-5307-475d-a9fc-14288368205c.jpg

Jan 25, 2014 | 2004 Ford Ranger

1 Answer

Radio stations


There is a radio option to recalibrate your touch screen. Please press the following three hard keys simultaneously RADIO/MEDIA, SEEK UP, NAV (AUDIO on REN). Once you begin to recalibrate the touch screen you must finish. Audio confirmation prompts are provided for each of the three points of calibration, one beep for the first, two for the second and three for the third. The calibration needs to be precise as possible and a PDA stylus would be recommended. The MyGIG radio requires the user to repress each calibration point to confirm the calibration process. A green crosshair indicates proper calibration.You must not start with the "+" but with the "+1", then goto "+2" and last to "+". Repeat this until all crosses are green and exit with pushing the menue or any other key. Done

Jul 20, 2012 | 2008 Dodge Grand Caravan

1 Answer

I need a calibration manual for a BM Autoteknik brake tester BM7010


hi there
are you interested to sell the rig and the weights?cheers

Feb 20, 2012 | Cars & Trucks

1 Answer

Engine check light with code p1589


The ECM memory should have been rest due to which the calibration of the accelerator pedal has been erased.
Use a scanning tool and calibrate deceleration sensor.
You can do the calibration by clicking Engine and ECT > > special function > > and then click "decleration 0 point calibration" while you do that make sure that your car IGN switch is "ON" and your gear shift is on "P"


Sep 29, 2011 | 2007 Toyota Yaris

1 Answer

Valve calibration for Toyota Corolla 84


If it is a gts,they do not need calibration. The engine 4ac is: intake-.008 in. and exhaust-.012 in.

Nov 25, 2009 | 1984 Toyota Corolla

1 Answer

Replaced battery - need to reset clock / radio won't play


Yes.. your problem is a micomp (micro computer) issue. There is a communication problem between the micomp and the touchscreen. Replace the micomp.

May 26, 2009 | 1996 Ford Explorer

1 Answer

Calibration of the valvs


la verdad es q. tengo uno del 87 el auto no le quiere subir la gasolina pende hechandola por el carbulador alguien me puede ayudar

Jun 15, 2008 | 1990 Nissan Sentra

Not finding what you are looking for?
2012 Hyundai Veloster Logo

Related Topics:

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...