Question about 2005 Volvo XC90

2 Answers

Windshield wipers will not turn off

Wipers will not turn off with the ignition on. They wipe exactly four times and stop at 12 oclock and pause for about 45 seconds and wipe exactly four more times and stop at 2 oclock for about 45 seconds and wipe four more times and stop at the park position.Then they start the process over again.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Volvo Expert
  • 134 Answers

First, check that your battery is good. These cars can have weird problems when the voltage gets low.



Then, you have two relays. The intermittent one and the regular one. Make sure that they are good. If you can swap with known-good ones, that will answer that.



Also make sure you have a good ground to the wiper motor. That can make it act up.



What I would likely gamble on, is that your motor is going out and by replacing the motor, your problems will go away.

You might want to do the free/cheap tests first, because replacing the motor and then STILL having the problem would not be fun. :D

Posted on Mar 19, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volvo Master
  • 3,679 Answers

Either faulty wiper switch or wiper motor , need to be checked by a auto electrician

Posted on Mar 19, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 79 Answers

SOURCE: volvo s40 2000 has 2 wiper blades, 1 has stopped

there is one wiper motor,in the off position,reset yuor wiper arms and tighten the nuts that hold them down on the mounting points of your wipers

Posted on Oct 12, 2009

  • 2 Answers

SOURCE: please am using volvo 850, 1995. The problem am

Sounds like a blown thermostat to me.....

Posted on Jan 08, 2010

  • 252 Answers

SOURCE: Windshield wipers working intermittently. Sometimes

This is the wiper motor failing...But to be safe unplug wiper motor,turn on wiper switch,connect test light to negative side of battery or good solid metal ground and stick probe in connector.if it is not working and the test light is not on then the wiper switch has failed.....and if the test light comes on at connector the wiper motor has failed..Since it works intermittently have an assistant to work the wiper switch and test a number of times to be sure.You can buy a cheap test light that will be good enough to check this at any auto parts store...BEFORE YOU BEGIN YOUR TEST MAKE SURE TEST LIGHT
HAS GOOD GROUND BY CLAMPING TO NEGATIVE SIDE OF BATTERY AND TOUCH PROBE TO POSITIVE SIDE OF BATTERY TO ENSURE GOOD CONNECTION...LIGHT WILL COME ON.

Posted on Feb 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 ford escape wiper and washer has no power. cant hear it engage when on but was working a week ago. how can i troubleshoot it and find the fuse


Hi Justin , Do you know what a SJB - smart junction box is and where it is located on you escape ?
Windshield Wiper Operation
The smart junction box (SJB) supplies power to the multifunction switch from the SJB fuse 25 (20A) when the ignition switch is in the ON or ACC position. The multifunction switch supplies power to the windshield wiper motor for the HIGH or LOW/INTERMITTENT input, depending on the multifunction switch position selected. The SJB also supplies power directly to the windshield wiper motor from fuse 25 (20A) when the ignition switch is in the ON or ACC position for RUN/PARK operation. When the multifunction switch is in the LOW, HIGH, or INTERMITTENT position, power is supplied to the windshield wiper motor, which moves the wipers off the park position. Once the wipers are off the park position, an internal switch in the windshield wiper motor switches to the run/park position which directs power to the wiper switch then back to the wiper motor. This maintains power to the windshield wiper motor to complete the wipe cycle. When the cycle is complete, the internal switch in the windshield wiper motor switches back to the park position. If the multifunction switch is in the LOW or HIGH position, power is supplied from the multifunction switch and another wipe cycle starts. If the multifunction switch is in the INTERMITTENT position, the windshield wipers remain parked until the internal relay in the multifunction switch supplies power to the windshield wiper motor. The internal relay supplies power after a time delay that is determined by the 1 of 9 intermittent switch settings.

Jan 08, 2017 | 2005 Ford Escape

1 Answer

Monowiper works fine when in full wipe but when in intermittent wipe and park mode it stops 3 inches too high ??


It sounds like the wiper parking position relay has failed. You see, when you turn on the wiper a series of relays on the actuator side are energized and cause the wiper motor to turn on and move the mono-wiper through its arc.

When it reaches the maximum extent of its travel, the wiper circuitry then reverses the arms direction and it swings back. This goes on until you turn off the wipers by turning off the ignition key or turning off the power switch.

When you turn off the wipers, the parking circuitry is activated. The central feature of this part of the wiper circuitry is the parking position relay. As the wiper begins to de-energize the parking position relay is activated. The position relay ensures that the wiper returns gently to the same position each time you turn off the wipers.

If the parking position relay weren't there, the wipers would park wherever they stopped on the windshield. However, the relay circuitry charges when you hit the off button and ensures that the wiper arm sweeps down to the same spot each time. If it does not activate, the wiper arm stops as soon as you turn off the power, as noted. This means that the wiper might, one time, stop in the center of the windshield or it might stop all the way to the left of right.

Aside from its complete failure, manufacturers build in telltales that indicate when the circuit is about to go. One of them is the wiper blade's parked position. Normally, the position relay ensures that the de-energized wiper circuit settles gently to the bottom of the windshield, as noted. However, if the position relay is failing most manufacturers have it park some distance from the bottom of the windshield to give you a head's up that the relay is on its way out.

Since the wiper circuits are fairly involved, it is best to leave it to a trained professional to do the work. However, if you feel you have the expertise to do it, your first step is to obtain the serviced manual for your vehicle. The service manual will give you the step-by-step repair procedure.

Since all parts of the wiper circuitry are related be careful, if you are repairing it yourself, that you replace each component according to the instructions as you might damage something else inadvertently.

Nov 12, 2014 | Cars & Trucks

1 Answer

1999 Dodge Intrepid with flickering Dash Lights and Wipers Delay Problems


the dash lights is a lose ground or power connection the wipers could be a couple things there is a wiper relay that may be going bad or the wiper motor is going bad could even be both

Jun 03, 2013 | 1999 Dodge Intrepid

1 Answer

How to remove the windshield cowl on a 2002 tyota yaris


It can be faulty wiper motor or blown wiper control fuse.


Do you hear any kind of noise when you starter the wiper function. If yes then fuse is ok, but issue is wiper motor.

If no movement at all and no noise then its blown fuse or shorted/loose wiper control wiring:-----

For complete troubleshooting i suggest you few helpful links with accurate solutions.

-------------

Click the link below:-------


Complete wiper components replacing details ?

http://repairhelpcenter.blogspot.com/2011/11/complete-wiper-components-replacing.html

------------



1993 Ford F350 wipers not working?

http://repairhelpcenter.blogspot.in/2012/02/1993-ford-f350-wipers-not-working.html

------------

How to Replace a Windshield Wiper Motor

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-windshield-wiper-motor.html

------------

Wipers not working, but hear relay click on Lincoln LS?

http://schematicsdiagram.blogspot.com/2011/12/wipers-not-workingbut-hear-relay-click.html

-----------

Car windshield wiper gets power for movement and stops?

http://schematicsdiagram.blogspot.com/2011/12/car-windshield-wiper-gets-power-for.html

----------

How does cars Windshield Wiper System Works

http://technoanswers.blogspot.com/2011/11/how-does-cars-windshield-wiper-system.html

---------

1997 Honda Protege: Replace Wiper Transmission?

http://technoanswers.blogspot.in/2012/06/1997-honda-protege-replace-wiper.html

----------------

Windshield wiper fluid container leaking?

http://whatisbyme.blogspot.in/2012/05/windshield-wiper-fluid-container.html

-----------------

Where is wiper fuse located on1993 chevrolet suburban

http://technoanswers.blogspot.in/2012/02/where-is-wiper-fuse-located-on1993.html

------------

2002 Toyota Sienna: Wipers and Passenger side Power window stopped working?

http://technoanswers.blogspot.in/2012/04/2002-toyota-sienna-wipers-and-passenger.html

-------------


These details will help.

Thanks.

Nov 28, 2012 | Toyota Yaris Cars & Trucks

1 Answer

How do I remove the windshield wiper motor from a Ford F-250?


2002 Ford F-250 Windshield Wiper Motor Removal & Installation 1. Turn the ignition switch to the ON position. Turn the ignition switch ON until the wiper blades are straight up, then turn the ignition switch OFF. 2. Disconnect the negative battery cable. 3. Remove the right-hand and left-hand windshield wiper arm and blade assemblies. 4. Remove the cowl top vent panels. 5. Detach the electrical hardness connector at the windshield wiper motor assembly. 6. Remove 3 wiper motor (module assembly) retaining bolts and remove the module assembly from the vehicle. 7. Remove the wiper linkage retaining bolt and remove the linkage from the wiper motor. 8. Remove 3 retaining nuts and remove the windshield wiper motor To install; 9. Place the windshield wiper motor in position and install 3 retaining nuts. Tighten to 10-12 ft. lbs. (12-17 Nm). 10. Connect the wiper linkage to the windshield wiper motor and install the retaining bolt. Tighten the bolts to 14 ft. lbs. (20 Nm). 11. Place the wiper motor (module assembly) in position and install 3 retaining bolts. Tighten the bolts to 6 ft. lbs. (9Nm). 12. Install the electrical hardness connector to the windshield wiper motor. 13. Connect the negative battery cable. 14. Allow the windshield wiper motor to cycle several times while checking for proper wiper motor operation. 15. Turn the windshield wiper motor to the OFF position to park the wiper motor in the park position. 16. Install the cowl top vent panels. 17. Install the wiper arm and blade assemblies. Install the retaining nuts and tighten to 22-29 ft. lbs. (30-40 Nm). 18. Connect the negative battery cable. 19. Check the windshield wiper motor for proper operation and the wiper arms for adjustment.

Nov 09, 2009 | 2002 Ford E250

1 Answer

2002 saturn lw200--wiper blades dont park at bottom of windshied


You need to replace the crank arm on the motor and either replace the bracket under it or bend the tab back up on the bracket so the crank arm can contact it so the wipers stop in the right place.

Sep 02, 2009 | 2001 Saturn L-Series

1 Answer

Need to get a programmer dont know where its at


  • Windshield Wipers Continue to Run When Turn Signal and Windshield Wiper Switch Are Turned OFF
  • Damaged turn signal and windshield wiper switch .
  • Damaged windshield wiper motor .
  • Damaged windshield wiper control module.
7fd52e7.gif
efd7dbe.gif
Pin Number Circuit Circuit Function 1 57 (BK) Wiper Motor Ground (Park) 2 28 (BK/PK) Wiper Module to Wiper Motor (Park Switch) 3 65 (DG) Wiper Motor Power (Park Feed) 4 61 (Y/R) Wiper Motor Common (RUN) 5 56 (DB/O) Wiper Motor LO 6 58 (W) Wiper Motor HI
Windshield Wiper System The windshield wiper system consists of :
  • Windshield wiper motor (17508) (F-type).
  • Washer system.
  • Windshield wiper control module.
  • Turn signal and windshield wiper switch (13K359).
The windshield wiper control module is:
  • Located at the instrument panel fuse panel.
The windshield wiper motor is:
  • Attached to the cowl top extension (021A36) .
  • Connected to windshield wiper mounting arm and pivot shaft (17566) .
The turn signal and windshield wiper switch features a:
  • Rotary wiper switch.
  • Push type washer actuator.
OFF/Low/High Speed
  • Has a two-speed, permanent magnet, three brush electric windshield wiper motor .
  • The windshield wiper motor has a brush rigging that permits selection of low or high speed.
  • When the turn signal and windshield wiper switch is in the LO position, the common brush and the blue/orange wire brush are used, and the windshield wiper motor operates at low speed.
  • When the turn signal and windshield wiper switch is in the HI position, the common brush and the white wire brush are used.
  • In HI position, electric current will bypass a portion of the armature winding causing the windshield wiper motor to operate faster.
  • When the turn signal and windshield wiper switch is moved to the OFF position, the windshield wiper motor will continue at low speed until the park switch outer contacts open.
  • When the park switch contacts open, the windshield wiper motor stops in the park position.
Interval
When the turn signal and windshield wiper switch is in the interval position:
  • The wipers make single wipes separated by pauses.
  • The rotary switch is on the end of turn signal and windshield wiper switch .
  • The length of the pause can be set from approximately 1 to 17 seconds.
  • Length of pause decreases as the rotary switch is rotated away from off.
  • Length of pause increases as the rotary switch is rotated toward off.
While in the interval wiper mode:
  • It is normal to hear a slight click at the beginning of each on/pause cycle. NOTE: When using interval wipers, the first wipe may not occur until after a pause of up to 17 seconds.

May 27, 2009 | 1994 Ford Mustang

1 Answer

Wipers won't stop wiping.


Sounds like your intermittent wiper circuit is defective. Normally the intermittent feature is engaged by one of the functions on the multi-function switch (usually on the steering column). The circuit of the intermittent wiper periodically activates a relay that closes across the "Wiper On" switch. Your intermittent wiper circuit is likely defective and holding its relay closed (or the relay is stuck closed), thereby keeping the wipers on. Note: The wiper motor has an internal switch that opens when the wipers are in the park position and that is designerd to stop the wipers in the park position. When you turn on the wipers (or the intermittent relay is closed), the motor's internal switch is shunted such that the wiper does not stop at the park point of the cycle.

Apr 27, 2009 | Ford Explorer Cars & Trucks

Not finding what you are looking for?
2005 Volvo XC90 Logo

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...