Question about Toyota Tacoma

Open Question

Cruise control doesn't engage, 2005 toyota tacoma

Light for cruise, on dash, comes on but won't engage

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Cruise control does not work

On my 05 Wrangler Unlt'd Ruby - The vacuum hose on the drivers side of engine had come off, which disengaged my Cruise and the actuator which determines whether my heater points to the vent, Defrost or feet. Put it back on and secure with a cable tie.

If it is like mine, you will then have idling problems, especially when coming to a stop. You will need to clean the throttle body because the engine has picked up **** through the open port while it was off. Directions for that exist on this site elsewhere.

All of these are easy - i hadn't worked on a car in >25 years and it took me 30 min.

Posted on Sep 16, 2008

jmgldsmth
  • 1869 Answers

SOURCE: Cruise Control on 2 door Sport 4x4 with SOHC: Non-working cruise control. When turned on, cruise control does not engage, no dash light indication either.

look in your owner's manual for the location of the cruse control fuse it is different from other fuses usually much larger

Posted on May 21, 2009

Davaith
  • 56 Answers

SOURCE: 2005 Sport Trac Cruise Control does not engage

If you can please look under the hood and find the Air filter, and follow that all the way to a round metal part (Throttle body) If you can see it there will be a coil,and on that coid will extrude a curved plate with a cable(throttle cable) attached to it running all the way back inward toward the back of the engine, and next to that there should be a second cable (crusie control cable). This cable is pulled on when you engage the cruise control, by a black box next to the fuse box.
If the Cruise control cable is near by try to reattach it and if it is damaged then have your dealership or some one mechanically inclinded to replace the tip ( if plastic) or replace the cable.
If that didnt help please get back to me

Posted on Jul 16, 2009

  • 1 Answer

SOURCE: Toyota Tundra 2005. ABS, Airbag, Tire & cruise dash lights flash

how do you turn the maintenance light off after making oil change?

Posted on Sep 02, 2009

johnjohn2
  • 5763 Answers

SOURCE: 2005 Honda Accord 4cyl cruise control does not work

check all your fuses first then take a look at the brake switch and there is a criuse cancel switch also, i think there may be a problem with the switch,even if the cancel switch was bad i think the power would still stay on but cruise would just stop and power would stay on. check fuses and switches anyway to be sure then take a look at the power switch.

Posted on May 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2009 Toyota Tacoma 4 wheel drive 6 cylinder cruise control does not work


check fuses and relays --have vehicle scanned if theirs a fault pending most cuise controls wont operate most auto stores offer scan for free if good stat looking at switch and harness

Aug 01, 2016 | Toyota Cars & Trucks

1 Answer

What could cause the cruise control to stop working on a 2007 Tacoma?


If the dash light is not coming on when you push the button on the stalk, I am pretty sure it is the spiral cable running down the steering column. There is a Techbical Service Bulletin on this piece. Some are being replaced because they affect the air bags. Check with your dealer to se if your VIN is covered.

Apr 23, 2015 | 2007 Toyota Tacoma

1 Answer

Cruise control lights go on but cruise won't engage


Is you brake light working properly?

Feb 04, 2013 | Cars & Trucks

2 Answers

Light has gone out on the console display for compass and temp on the 2006 Toyota Tacoma headliner. Trying to find out which fuse to replace


2005-2009 Toyota Tacoma Overhead Console Fuse test
* does your cruise control work?
* do you brake lights work?
* does your dome light work?
The 10 amp IGI #2 fuse controls several other components including the dome light, cruise control, and
brake lights. If these are working but the compass is dim, intermittent, or dead then the control module
has gone bad.
This is a very common problem with the 05-09 Tacoma. The console is very prone to internal failure. I offer a reasonable repair service with a lifetime guarantee, check it out: www.autoclockrepair.com
There is a bunch of useful info there. Drop me an email if you have questions, thanks!

Nov 19, 2010 | 2005 Toyota Tacoma

3 Answers

The compass and outside temp on my 2006 Toyota Tacoma quit working. Is there a fuse for this unit and where would I find it?


Are your cruise control, dome, and tail lights also out? If so then it is a fuse. If not then the control unit has gone bad internally. You may be able to get it fixed under your warranty.
If it is not covered by your warranty, check out
www.autoclockrepair.com. We offer a very reasonable repair solution.

May 11, 2010 | 2006 Toyota Tacoma

1 Answer

My 2006 Corolla cruise control will not engage. The "Cruise" light on the dash comes on but then the speed will not set.


impretty sure its electronic throttle(fly by wire) so check all connections on the motor and the unit,check fuses

Oct 29, 2009 | 2006 Toyota Corolla

2 Answers

2005 tacoma temp display


The 10 amp IGI #2 fuse controls several other components including the dome light, cruise control, and brake lights. If these are working but the compass is dim, intermittent, or dead then the control module has gone bad. You can get a replacement from toyota but I believe it costs $500+.
I offer a repair service with a lifetime warranty. Check it out:
www.autoclockrepair.com
thanks!

Jul 23, 2009 | 2005 Toyota Tacoma

1 Answer

2001 Toyota Tacoma- turn lights not working and cruise control


fuses???
Check relays.....
Harness grounds, engine ground,
Check the trailer harnes for short.
Vitally

Jun 02, 2009 | 2001 Toyota Tacoma

1 Answer

Cruise control stopped working


check brake switch under dash above the brake pedal. See if sensing wires are broken . or if it uses a duplicate switch sensor check it is engaging properly. Also check you tube on possible failures.
Also in the engine bay the cable from the accelerator petal will attach to the trottle on the engine. Check for another cable at this location from the cruise control and check the cable is not broken .

Check brake globes are functioning and are not blown as well.

Jun 17, 2017 | 1985 Nissan 300ZX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...