Question about 1988 Lincoln Town Car
I would like to tune up a 1988 Lincoln Towncar by myself
You need: spark plugs, spark plug wires, depending on if newer system that is all. if it is older you will also need rotor cap and rotor button. label the plug wires and change one plug and corosponding wire at a time after changing the (cap and button).make shure the plug wires go on the new cap in the same order that they came off.
Posted on Mar 19, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
IF ENGINE RUNS AT RIGHT TEMP SOUNDS LIKE YOU MAY HAVE AIR BLOCK, OR BLOCKED HEATER MATRIX, CHECK FIRST CHECK THE HEIGHT OF THE HEATER MATRIX IN THE CAB , IF ITS HIGHER THAN THE FILLER/EXPANSION TANK. THEN COULD BE AN AIR LOCK, LOOK FOR THE HIGHEST PIPE AND SEE IF THERE IS A BLEED VALVE, IF NOT TAKE BOTH PIPES OFF THE MATRIX FEEDS (TWO PIPES GOING FROM ENGINE BAY TO INSIDE OF CAR, AND FLUSH OUT WITH HOSE TO SEE IF IT IS BLOCKED, AND RECONNECT LOWEST PIPE FIRST AND FILL SYSTYM TILL WATER APPEAR FROM TOP AND RECONNECT RUN MOTOR, AND KEEP TOPIN UP, YOU CAN BUY A COOLENT FLUSH SOLUTION TO CLEAN THE SYSTYM OUT
Posted on Dec 29, 2009
are the heater hoses hot at operating temp?if they are hot you could have a blend air door problem if they are cold you could have a weak water pump not pushing the coolant far enough.
Posted on Feb 07, 2010
Tips for a great answer:
Aug 14, 2015 | 1988 Lincoln Town Car
Aug 13, 2015 | Lincoln Cars & Trucks
Sep 10, 2011 | 1988 Lincoln Town Car
Aug 16, 2011 | 1999 Lincoln Town Car
Oct 09, 2010 | 1988 Lincoln Town Car
Feb 07, 2010 | 1988 Lincoln Town Car
Aug 22, 2009 | 1998 Lincoln Town Car
164 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: