Question about 2008 Honda Ridgeline

1 Answer

How to remove front seats

I want to take the cover that's under the front seat.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 65 Answers

The seats are simply bolted to the floor. You'll need to remove the track trim pieces to see them. 14mm socket to remove them. The wiring can be disconnected easier once the seat is loose and can be tilted backward.

Posted on Mar 19, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

lazydave
  • 68 Answers

SOURCE: third row seat is down and strap is hidden

You should be able to reach under the seat and pull the metel bar under the seat

Posted on Jul 25, 2009

keemo68
  • 1263 Answers

SOURCE: Front seat removal

your best bet is to go to a Napa,Oreillys,etc you can purchase a manual for about 20 dollars it has step by step instructions on a multitude of problems and is a good investment. it has all the pertinant info for daily driving problems and the fixes as well there are schematics and diagrams as well. please rate this.

Posted on Sep 01, 2008

  • 750 Answers

SOURCE: the front seat belt was locked to the back seat belt in error

you may have to pry it out, but would have to replace the lock assembly can get one at reck yard or supply shop

Posted on Oct 07, 2009

  • 1 Answer

SOURCE: how do you remove the driver side power seat

For the left Insert a flat blade screwdriver between the space between the cover and the switch and gently pop it up. For the switch for seat back control, place the screwdriver blade at the space at the bottom of the switch.

Posted on Jul 23, 2011

  • 2474 Answers

SOURCE: how to remove front seat 91 honda accord

look 4 body bolts ,possible (torx head) you should only have to loosen them unless you have a great need to remove seat ,seat belt will also have to be removed at floor and a good chance there will be electrical connections to on board computer -bcm or air bag srs .

Posted on Oct 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the original seat covers from a PT Cruiser driver seat


get under the front seats there are 4 bolts holding the seats in the floor plus a torx bolt for the lap belt, take seats out the back seat has 2 torx bolts at the front bottom of the lower cushion remove them and pull the bottom forward the back has 2 bolts holding it remove them and lift the unit straight up, be carefull there is wires under the front seat for the seat belt warning light carefully unhook them 1 for each seat now you need hog ring plairs and a bunch of new hog rings to secure the new fabric, use side cutter plairs to remove old hog rings carefully remove the seat covers, hog rings can be got at car glass shops the pliars can be got from summit racing or a place that sells car uppolstrytake your time and you can do it!!

Oct 29, 2014 | Chrysler PT Cruiser Cars & Trucks

1 Answer

How to remove front passenger side seat


Always disable the air bag system first, to prevent accidental deployment of the air bags. The main airbag module is beneath carpeting under passengers seat. To remove passengers seat, At the rear of the seat remove the two bolts securing the tracks to the floor, tilt the seat up and towards the instrument panel, unplug any electrical connectors beneath and remove the seat. the front plastic track covers can remain in place while the seat track tabs are lifted out of the slots on the floor. ( caution disable airbag before removing the seat ) Good-Day! Hope this helps you!

Sep 12, 2014 | 2000 Chevrolet Malibu

1 Answer

Where are the fuses located for the air conditioner in a 2001 pontiac bonneville


The interior fuse box in a Pontiac Bonneville is underneath the backseat on the driver's side.

To remove the rear seat cushion:
1. Pull up on the front of the cushion to release the
front hooks.
2. Pull the cushion up and out toward the front of
the vehicle.

To reinstall the rear seat cushion:

1. Buckle the center passenger position safety belt, then
route the safety belts through the proper slots in the
seat cushion. Don't let the safety belts get twisted.
2. Slide the rear of the cushion up and under the
seatback so the rear - locating guides hook into the
wire loops on the back frame.
3. With the seat cushion lowered, push rearward and
then press down on the seat cushion until the spring
locks on both ends engage.
4. Check to make sure the safety belts are properly
routed and that no portion of any safety belt is
trapped under the seat. Also make sure the seat
cushion is secured.

Notice:
The battery and main fuse blocks are located
under the rear seat cushion. The battery's ground
terminal and some relay wires are exposed.
To help avoid damage to the battery and wires,
be careful when removing or reinstalling the seat
cushion. Do not remove covers from covered
parts. Do not store anything under the seat, as
objects could touch exposed wires and cause
a short.

Jul 22, 2014 | 2001 Pontiac Bonneville

1 Answer

How do you remove the "TRACK TRIM" from the front seat of my Honda Ridgeline.


check for screws or caps covering screws in the plastic trim.if there aren't any take a flashlight and look under the seat for clips that release the plastic, it may just pry off.

Mar 19, 2014 | 2008 Honda Ridgeline RT

1 Answer

How to remove front seat back 2010 cts


Remove the front and rear trim covers over the four bolts that hold the seat to the floor, then go under the seat and disconnect all the wiring being careful not to break any of the connector locking tables.

Jul 12, 2012 | 2010 Cadillac CTS

2 Answers

Difficulty locating my Benz R350 Batteries


In the 2006, the battery is under the front passenger seat.

To get to it is complicated -- from manual:


Move seat as far back as possible. Seat rails have covers on them - slide them forward....the left one will only slide forward, cannot be removed. Between the two seat rails you will see two little battery cover mounting nuts. Use 6 mm T-handle hex key to remove the nuts. Move seat as far forward as possible and twist rear rail covers to left and right and then pull toward rear of car. Pull back/fold floor carpet under seat from front to back (carpet is perforated so you may have to really yank the first time). There are two more battery cover mounting nuts between rear seat rails. There is a battery cover with an air vent pull it slightly to right and then lift out. There is a vent hose attached to battery on left side -- pull it out. Unfasten & remove attachment nuts on left side (low). Remove the battery attachment once those nuts are off. Push battery to the left. Disconnect battery negative lead (right) (do not let it touch pos. lead on left). Remove cover from pos (red/left) terminal and disconnect lead.

Feb 15, 2010 | 2007 Mercedes-Benz R350

1 Answer

Need to remove 2004 Yukon drivers seat. how do


there are plastic covers over the front bolts that hold the seat to the floor remove the screws the hold these covers on then remove the two front bolts under these covers then move the seat all the way forward and you should be able to see the two bolts that hold the rear of the seat to the floor pan there could be covers on these to remove the bolts and then tip the seat forward and unplug the wire connector for the power seat(if it has this option).hope this helped

Jan 01, 2010 | 2004 GMC Yukon

1 Answer

How do you remove back seat ,the one you sit on ,from a 97 toyota corrola,i have to take seat cover off


UNDER THE FRONT OF THE REAR SEAT LOOK FOR TWO BOLTS THAT YOU WOULD REMOVE RAISE UP ON THE FRONT OF THE SEAT AND PUSH TO THE REAR THIS SHOULD WORK

Aug 19, 2009 | 2008 Toyota Camry

1 Answer

How to remove the back seat from my 1998 Mercury Villager


it is not designed to be removed. It is designed to slide back and forth as needed.

Section 01-10: Seats and Tracks 1998 Villager Workshop Manual
REMOVAL AND INSTALLATION Seat, Rear Bench
Removal
  1. Remove the center seat(s) if equipped. Refer to the procedure in this section.
  1. Slide the bench seat forward to the center row seating position.
  1. Use a flat-blade screwdriver to remove the cover caps from the front of the rear seat cushion latch cover.




  1. Remove the two rear seat bolts from the front of the rear seat cushion latch cover.




  1. Lift the rear seat cushion floor cover on the back of the rear bench seat and remove the two inboard rear seat bolts and the two outboard rear seat bolts.




  1. Remove the bench seat from the vehicle through the body side door opening.

Apr 30, 2009 | 1998 Mercury Villager

2 Answers

I want to make my 1999 Mercury Villager Sport into a cargo loader, with just the front seats kept and the rest of the back empty. How do I remove the other 3 seats? So far, I can't get any of them to budge...


the middle seats come out easily. There are 2 handles you have to lift up on each of the bucket seats, they are in the front of the seat down by the seat tracks. After you lift them, tilt the seat upward in the front and rotate them backward. Then lift out of the hooks. Each seat is held down by 4 hoks.

The 3rd row seat is not designed to come out xcept by a technician. It does slide forward all the way up to the front seat. It has a sliding seat track.
First, lift the T handle under the seat cushion on the left front side of the seat. This will allow you to lift the seat bottom up all the way to lcok in the full up position.
Then, lift the lever on the same side of the seat and slide the seat forward. It will stop in 4 places.
Rear -Rear
6 inches forward of that.
another two ft to the second row seating position
full frward against the front seats.

Pleae rate as fixya if this helps.

c4253aa.gif Seat —Third Row Bench Removal
sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Removal of the third row bench seat requires more than one technician.
  1. Remove the second row seats. For additional information, refer to Seat—Second Row .
  1. Remove the floor mats.
  1. Lock the seat cushion in the upright position.
    1. Lift the handle to release the cushion.
    1. Lock the seat cushion in the upright position.
0235766.gif
  1. Move the third row bench seat to the second row position.
    • Lift the seat track release handle.
  1. Remove the two bolt covers.
  1. Remove the two seat track front bolts.
  1. Remove the four seat track rear bolts.
    1. Position the rear seat cushion floor cover aside.
    1. Remove the four seat track rear bolts.
  1. Remove the third row bench seat.

Mar 02, 2009 | 1997 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...