Question about 2001 Lexus LS 430
After Oil Change the VSC and The Cruise Control Fail with in 10 feet of stall. They must of unplugged some connector. Please advise
You should get codes from a quick computer diagnosis from Autozone or Pepboys.
They will run a diagnostic for free in two or three minutes
Posted on Mar 18, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Lexus IS 250-
1. turn engine off , 2. press trip meter reset knob and hold it , turn ignition on , with the engine off, continue to press and hold reset knob until the trip meter displays "00000" , reminder light will turn off . if system fails to reset , repeat procedure . +
Posted on Jan 02, 2009
WITH IGNITION SWITCH OFF PRESS AND HOLD BUTTON ON THE TRIP ODOMETER THEN .SWITCH IGNITION ON WITH ENGINE OFF.CONTINUE TO HOLD BUTTON UNTIL MAINTANANCE REQD LAMP EXTINGUISHES RESETTING IS DONE.
Posted on Feb 17, 2010
SOURCE: 2001 lexus ls430: warning
yaw sensor is out of calibration, most likely from hoisting vehicle in air. sensor needs to be calibrated before light will go out. jump pin 3 and 5 of dlc under driver side dash. connect jumper wire with ignition off, turn ignition on, vsc light should flash, let it flash for awhile (10 sec). turn ignition off and disconnect jumper wire.(do this with vehicle station on ground).
Posted on Sep 21, 2010
Tips for a great answer:
Mar 22, 2015 | 2001 Lexus ES 300
Apr 09, 2011 | 2006 Lexus Ls 430
Nov 16, 2010 | 1999 Lexus ES 300
Aug 25, 2010 | 2006 Toyota Sequoia
Jan 06, 2010 | 2003 Lexus Gs 300
Jan 22, 2009 | 2001 Lexus LS 430
127 people viewed this question
Usually answered in minutes!