Question about Ford Ranger

1 Answer

Turning over but not firing

Would not start changed the spark plugs and the crank and cam sensors also the iac valve checked for spark there is also checked the smart junction box noL starting help

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 64 Answers

Check for signal to the injectors (noid lights). If you have signal then check compression.

Posted on Mar 19, 2014

Testimonial: "I have already check for the pulse to the injectors and a compression test all are ok but still doesn't start"

  • John Giles Mar 20, 2014

    Have you checked fuel pressure?

  • manuel
    manuel Mar 20, 2014

    yes have checked fuel pressure 62 lbs of pressure i am checking other sensors now just in case something else is keeping the engine from turning over at alost here

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 1999 Chevy tahoe will not start

check the crank sensor. no signal from the crank sensor causes a no spark condition. best way to check is to put a scanner on and check for rpms.
the crank sensor is differnt from the cam sensor

Posted on Apr 26, 2009

ourhowse
  • 2007 Answers

SOURCE: 03 Altima 2.5, Wont turn over on cold start

First, change the fuel filter, and make sure the lines are good. Check the intake manifold bolts for tighness, check all vacuum lines. Best to have it running, wiggle them around and listen for a hiss. Lastly, change idle control sensor, if the other suggestions don't make a difference.

Posted on Jun 30, 2009

Davaith
  • 56 Answers

SOURCE: 2000 chevy venture doesnt start

Not the IAC, or MAF, or 02

Does the Van Crank over?
Have you checked the IGN Relays? 1,2,and 3?
How did the Battery test out?
Anything below 11.9v battery is dead.
So I suggest that you do not throw any more parts and check the battery again.

Posted on Jul 15, 2009

cmm19987
  • 82 Answers

SOURCE: 1996 Chevy Suburban C1500 V8 5.7 suddenly died

Is the fuel pump coming on?

Posted on Nov 10, 2009

  • 1 Answer

SOURCE: 2001 FORD TAURUS 24 VALVE DOHC MOTOR WILL NOT START

i have a 2001 taurus 24valve dohc 3.0 engne i have a bad coil pack what steps do i need to do to change the coil pack

Posted on Jul 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2001 dodge neon cranked without the cam sensor connected. what's wrong with this picture?


Changing the Cam Position Sensor on Dodge Neon ...

? 10:33
https://www.youtube.com/watch?v=ciCPQ0kVAQY
Dec 21, 2012 - Uploaded by VeeTheAmazingGreek
... had to change out the cam position sensor on my 2001 Dodge Neon. ... 1997 Dodge Neon no start, crank sensor problems - Duration: 26:53.

Dodge Neon Questions - It will turn over but has no spark ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusAug 9, 2015 - I did have a neon while ago and image crank sensor was bad ... my 1999dodge neon has no spark it will turn over but not fire i have changed the crank sensorcoil ... I have a 2001 Dodge Neon 2.0 with 140,000 kms on it.

Dodge Neon Questions - 2001 Dodge Neon will turn over ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusJan 7, 2013 - I have a 2001 Dodge Neon 2.0 with 140000 kms o... ... went about a month before this recent problem, fixed that with no problem now this. ... firing. you said you replaced the cam sensor, did you do the crank sensor as well? ... My 1996Dodge Neon won't stay running whenever I take my foot off of the gas.

Starting Issues and Trouble Code Due to Defective Cam ...

repairpal.com > Problems > Dodge > Neon

Feb 05, 2016 | 2001 Dodge Neon

1 Answer

Got engine codes saying to replace the cam sensor. I did and the code went away, but it still won't fire.


If you have diagnosed the vehicle to have no fire, does it have injector pulse? Fuel pressure? Does the check engine light come on during a bulb check? Have you looked at the crank sensor? This sensor supplies info to the computer to start/control ignition spark

Dec 29, 2015 | 2001 Daewoo Leganza

1 Answer

My 1997 jetta vr6 glx does not have spark in number 3 and 4 at the coil. changed the coil and the ecm, still no spark at coil. whats going on?


Check to see if the cam position sensor or the crank position sensor is misaligned or has a corroded connector plug. The ECM needs to get a firing pulse from all cylinders. If the engine is a dual cam and is not attempting to start, some engines have a timing device (chain) for each bank. If the chain broke on one bank, the cam sensor can not possibly fire because the cam is not turning.

Aug 14, 2012 | Volkswagen Jetta Cars & Trucks

2 Answers

My 02 chevy cavalier turns over but will not start. I have replaced ever thing i know that could be wrong.


does it produce fire does the gas pressure rise does the crank sensor and cam sensor work

Feb 09, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

Got a 2001 Chevy blazer 4.3L cranks but does not start. got 62 psi at the fuel rail, replaced plugs and wires, got good spark at coil, replacing car and rotor! if the cam sensor or crank senor are bad...


Crank sensor is primarily for the spark and the cam sensor is for fuel management, crank/cam correlation for misfire purposes I would also change the wires.

Jul 12, 2017 | 2001 Chevrolet Blazer

1 Answer

99 Jeep Cherokee Sport, 4.0L -won't start


you need to have it connected to an OBD2 machine and watch if you are missing the cam sensor showing RPMs
or if your missing crank sensors RPMs,
it could be a wiring problem or computer if your seeing the RPMs from both sensors,and the last thing i would check is hooking up a fuel gauge to the reed valve and watch what fuel pressure you have while cranking,if the cam sensor is the culprit it will turn the fuel off after the cranking.

Jan 11, 2010 | 1999 Jeep Cherokee

2 Answers

1995 ford explorer doesn't start, crank & cam sensors replaced


Does you fuel pump delivers fuel. Is it there a spark.

Dec 29, 2009 | 1995 Ford Explorer

2 Answers

2001 FORD TAURUS 24 VALVE DOHC MOTOR WILL NOT START


i have a 2001 taurus 24valve dohc 3.0 engne i have a bad coil pack what steps do i need to do to change the coil pack

Sep 07, 2009 | 2001 Ford Taurus

3 Answers

1999 Chevy tahoe will not start


check the crank sensor. no signal from the crank sensor causes a no spark condition. best way to check is to put a scanner on and check for rpms.
the crank sensor is differnt from the cam sensor

Nov 02, 2008 | 1999 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...