Question about Cars & Trucks
I own a ford courier 2006 model duel cab, and i am unsure of its towing capasity? its a 2.5L turbo diesel.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The radiator should be under pressure. If the cap for the overflow or radiator is worn, then this can cause it to overheat and the system will not have pressure. If the cap is off, the water should be seen flowing, thus letting your know the thermostat and water pump are working, but it doesn't mean they are working 100%.
Posted on May 09, 2010
Disconnect the negative battery cable.
Remove accessory drive belt.
Remove the timing belt cover.
Align the timing mark on the camshaft sprocket with the timing mark on the cylinder head.
Confirm that the timing mark on the crankshaft sprocket is aligned with the timing mark on the oil pump housing.
Loosen the belt tensioner attaching bolt.
Pry the tensioner away from the timing belt and tighten the attaching bolt.
Remove the spark plugs.
Remove the RH engine mount and raise the vehicle.
Remove the splash shield.
Remove the crankshaft damper.
Remove the timing belt.
Note: Do not mix 1/2 round and trapazoidal belt tooth profiles. This can cause premature belt wear, also the belt is meant to run in a dry environment. For maximum belt life, no oil or belt dressing compound should be applied to the timing belt.
Install the timing belt over the sprockets in a counterclockwise direction starting at the crankshaft. Keep the belt span from the crankshaft to the camshaft tight while installing over the remaining sprocket.
Loosen the belt tensioner attaching bolt, allowing the tensioner to snap against the belt.
CAUTION: Do not rotate crankshaft with the spark plugs installed .
Note: Do not turn the engine counterclockwise to line up the timing marks. After rotation, recheck camshaft timing marks for alignment. This will verify that the belt has not skipped a tooth during rotation.
Rotate the crankshaft clockwise two complete revolutions (720 degrees) stopping at top dead center. This will allow the tensioner spring to load the timing belt.
Tighten the belt tensioner attaching bolt to 23-30 Nm (17-22 lb-ft) .
Install the crankshaft damper.
Install the splash shield.
Lower the vehicle.
Install the RH engine mount.
Install the spark plugs.
Install the timing belt cover.
Install the accessory drive belt automatic tensioner.
Install the accessory drive belt.
Connect the negative battery cable.
Posted on Jun 13, 2012
Tips for a great answer:
Feb 19, 2017 | Ford Cars & Trucks
Nov 25, 2016 | Nissan Cars & Trucks
Nov 26, 2015 | Ford Cars & Trucks
Sep 01, 2015 | Ford Cars & Trucks
May 26, 2014 | 2006 Isuzu i-280
Oct 14, 2011 | Ford Cars & Trucks
Aug 17, 2011 | Nissan King Cab Cars & Trucks
Jun 09, 2010 | 1999 Ford F250 Regular Cab
Aug 26, 2009 | 2006 Isuzu I 370
305 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: