Question about 2009 Scion xB
Steering wheel warning light comes on when I start car
Well all the lights should come on when you start it, it is the system is telling you all is ok, now if it stays on then sorry to say you have to take it to a dealership to have it looked at
Posted on May 08, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: scion xb wont start
Hi.. Yes i fix my problem by disconecting the neutral suitch and reconecting it ,,they get dirty with time and dont make contact ,Is a good idea to disconect and clean as many contacts as you can and put some special grease on them to prevent other problems ...
Posted on Jul 29, 2008
1st ...that should be covered under 6 year 50k power train warranty from the dealer.
But if your over....you need to unbolt the right side motor mount (on the water pump side) and lift the engine some with a floor jack to get clearance,
Posted on Apr 11, 2009
SOURCE: Warning lights won't go off.
You need to have a code scanner hooked to the car to find out why the lights are on, if there is an auto zone or advanced auto near you, go there and ask them if they can hook one up, or call around to see who can do it.
Posted on Jun 01, 2009
I just looked at my '04 xB. It looks very straight forward.
loosen the bolt that holds the alternator to the bracket.
carefully slide the alt to the bottom. (Also be aware of the plug and wires on the alt.They should never hold the weight of the alternator. You dont want them breaking prematurely.)
Pull the belt off, remove the belt from the crank shaft pulley.
Do the reverse, and you will have replaced the belt.
Make sure to check the belt in about a week or so.
New belts will stretch over time. Make sure you keep the tension tight enough to work correctly, but not so tight that the alernator shaft is warped.
I usually place the new belt on both pulleys and give a good "medium" pull on the alt while tightening. Find the middle of the belt and squeeze them together, depending on the type and length of the belt, there should be about 1/4" of flex on both sides.
Posted on Jun 29, 2009
Tips for a great answer:
May 23, 2015 | 2005 Scion xB
Sep 01, 2014 | 2009 Scion xB
Jan 18, 2013 | 2009 Scion xB
Jul 15, 2012 | 2011 Scion xB
Aug 16, 2017 | 2008 Scion Xb
Jul 10, 2011 | 2009 Scion xB
Mar 09, 2011 | 2009 Scion xB
Feb 18, 2009 | 2006 Scion xB
Dec 16, 2008 | 2005 Scion xB
139 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: