Question about 2006 Nissan Sentra

Open Question

P0350 no rn engine

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0351 code loss of power 2.3L08ford ranger,it warms slow and really need to eliminate1~voltage regulator is where?) & 2~ ground through PCM) 3~knowing limits&threashholds{sensorsIGNcircuit}?Ty 0$


P0351 loss of power ? That's not what this code is about . P0351 - Ignition Coil A Primary/Secondary Circuit ,you have a bad coil and possibly a bad coil driver inside the PCM . Do yourself a favor an take your vehicle to a qualified repair shop !
P0351 - Ignition Coil A Primary/Secondary Circuit Description: See the description for DTC P0350. Possible Causes: See the possible causes for DTC P0350. Diagnostic Aids: See the diagnostic aids for DTC P0350. Application Key On Engine Off Key On Engine Running Continuous Memory Coil-on-plug (COP) ignition testing - GO to Pinpoint Test JF . GO to Pinpoint Test JF . Coil pack ignition testing - GO to Pinpoint Test JE . GO to Pinpoint Test JE .
P0350 - Ignition Coil Primary/Secondary Circuit Description: Each ignition primary circuit is continuously monitored. The test fails when the powertrain control module (PCM) does not receive a valid ignition diagnostic monitor (IDM) pulse signal from the ignition module (integrated in the PCM). Possible Causes:
  • Open or short in the ignition START/RUN circuit
  • Open coil driver circuit
  • Coil driver circuit short to ground
  • Damaged coil
  • Coil driver circuit short to VPWR
Diagnostic Aids: Use the 12-volt non-powered test lamp to verify START/RUN voltage at the ignition coil harness connector.
Check the coil driver circuit for open, short to VPWR, or short to ground. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to Pinpoint Test JE .

Feb 18, 2017 | 2008 Ford Ranger

2 Answers

I HAVE REPLACED THE COIL PACKS AND THE COMPUTER ON MY 2006 F150,BUT I STILL GET AN ERROR CODE OF 352.WHY IS THIS ?


P0352 - Ignition Coil B Primary/Secondary Circuit Description: See the description for DTC P0350. Possible Causes: See the possible causes for DTC P0350. Diagnostic Aids: See the diagnostic aids for DTC P0350. Application Key On Engine Off Key On Engine Running Continuous Memory Coil-on-plug (COP) ignition testing - GO to Pinpoint Test JF . GO to Pinpoint Test JF . Coil pack ignition testing - GO to Pinpoint Test JE . GO to Pinpoint Test JE .
P0350 - Ignition Coil Primary/Secondary Circuit Description: Each ignition primary circuit is continuously monitored. The test fails when the powertrain control module (PCM) does not receive a valid ignition diagnostic monitor (IDM) pulse signal from the ignition module (integrated in the PCM). Possible Causes:
  • Open or short in the Ignition START/RUN circuit
  • Open coil driver circuit
  • Coil driver circuit shorted to ground
  • Damaged coil
  • Coil driver circuit shorted to VPWR
Diagnostic Aids: Use the 12-volt non-powered test lamp to verify START/RUN voltage at the ignition coil harness connector.
Check the coil driver circuit for open, short to VPWR, or short to ground. Application Key On Engine Off Key On Engine Running Continuous Memory Coil pack ignition testing GO to Pinpoint Test JC . Coil-on-plug (COP) ignition testing GO to Pinpoint Test JB . Without me testing , it's hard to say what you got going on ! Coil packs ? What engine does it have ? 5.4 L ? should have coil on plug ignition .

Jan 13, 2017 | 2006 Ford F-150 Regular

1 Answer

2005 Ford f 150 4.2liter Check engine light P0352


Does your f150 have coil on plug or coil pack ignition system !
P0352 - Ignition Coil B Primary/Secondary Circuit Malfunction Description: See the description for DTC P0350. Possible Causes: See the possible causes for DTC P0350. Diagnostic Aids: See the diagnostic aids for DTC P0350. Application Key On Engine Off Key On Engine Running Continuous Memory Coil-on-plug (COP) ignition testing - GO to JF1 GO to JF1 Coil pack ignition testing - GO to JE1 GO to JE1
What this code is say is there is an open in the coil electrical circuit . Had this code on a few ford's where the problem was the PCM - engine computer ! Spark plug gap got worn so far as to cause the coil to break down and send 20,000 volts to the coil control transistor inside the engine computer . Watch this video !
Ford 5 4 shorted coil primary winding and bad computer driver Doesn't matter this is a 5.4 L , works the same way !

Jan 02, 2017 | Ford Cars & Trucks

1 Answer

Morning,I have this 2 codes on my Toyota avanza.P1601 and P0350 what do they mean and how can I solve them


p1601: compression code

p0350: ignition coil primary/secondary circuit

did you change your spark plug (do you change them regularly)
coil pack is on its way?

is the car misfiring when started?
if yes then change coil.

May 19, 2016 | Toyota Cars & Trucks

1 Answer

I have a PO350 code on my Hyundai xg350L. What does it mean and how do I fix it?


P0350 Hyundai - Ignition Coil Primary/Secondary Circuit pdf.gif share.png 2 0 [img alt="P0350 Hyundai Comments" src="http://7ff587e0977842abc470-bfcce390d0a24108a1dce58e5acfca1f.r31.cf1.rackcdn.com/comments.png"> ' Add Comment - Faulty Ignition Coil Primary/Secondary
- Ignition Coil Primary/Secondary harness is open or shorted
- Ignition Coil Primary/Secondary circuit poor electrical connection
- Faulty Engine Control Module (ECM)
[img src="http://7ff587e0977842abc470-bfcce390d0a24108a1dce58e5acfca1f.r31.cf1.rackcdn.com/help.jpg" alt="What does this mean?" > What does this mean?
When is the code detected?
The test fails when the Engine Control Module (ECM) does not receive a valid pulse signal from the ignition coil.
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of Power
- Engine may be harder to start
- Engine hesitation
- Rough engine idle
P0350 Hyundai Description
The ignition signal from the Engine Control Module (ECM) is sent to and amplified by the power transistor. The power transistor turns ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the proper high voltage in the coil secondary circuit.


Read more: http://engine-codes.com/p0350_hyundai.html#ixzz3JNf6yMdg

Nov 17, 2014 | Hyundai XG350 Cars & Trucks

1 Answer

Sirion p0350


code p0350 refers toignition coil, primary/ secondary--circuit malfunction===causes ---wiring--ignition coil---ECM. Have the coil checked out and replace if necessary.

Oct 22, 2013 | Cars & Trucks

1 Answer

I have a 2001 sentra gxe with the following fault code P0350, P0113, P0183. The ignition coil have burnt out twice, the car stalls & the engine shakes severely when started. I have been advised to...


P0350-Ignition primary and secondary circuit malfunction.
P0113-O2 circuit slow respose
P0183-Fuel temperature "A"High input
They say 3 is a charm.as for P0183 the temperature circuit is disconnected (this is a clue),P0113 circuit of the 02 slow response (this is a clue), P0350 secondary and primary that leads to a (clue)
You have wires touching where they should not be touching. If you replace ECM and Coil it will just come back with the same problem,who every you take this for repair they need to recognize this as a shorted wire harness and see it as one unit,not just read a code.This is tied as one , have them open the wire harness to the affected coil not all the way just enough to see if it shorted out, My suggestion is to check and make sure the conection to the coil is not loose and all connection for coil is not loose,

Apr 27, 2011 | 2002 Nissan Sentra

1 Answer

Ford f-150 running rough


Ok P0174 Is bank 2 (drivers side) is running lean
P0350 is an ignition coil primary circuit malfunction
P1127 indicates the HO2S heater(s) were not on during KOER Self-Test and testing of the HO2S did not occur.Engine not operating long enough prior to performing KOER Self-Test.
P1780 means that the OD switch on gear shifter was not cycled off then on during self test.
I would recommend re-running your self test and make sure to warm the engine up first and make sure to cycle the od switch on/off during the test and recheck the codes.
P0174 lean code could be caused by a miss-fire and P0350 could be caused by anything in the ignition(coil,plug,wires,etc.).
If the P0174 and P0350 repeat I would concentrate on the cylinders in bank 2. If you have a spark tester you could hook it to each of those plug wires individually and look for a weak spark. or try and unhook each wire one at a time and see if you can find a weak cylinder that way by the amount of rpm drop and replace the components on that cylinder and retest.

Mar 25, 2009 | 1997 Ford F150 Regular Cab

1 Answer

Engine management light on


P0350 Hyundai Ignition Coil Primary/Secondary Circuit

Jan 18, 2009 | 2004 Hyundai Santa Fe

2 Answers

Error code P0350


P0350 Ignition Coil Primary/Sensor Circuit If there is no voltage at either of 2 ignition coil group during 32 ignitions, the PCM determines that a fault exists and a DTC is stored.. http://hmaservice.com/viewer/dispimg.asp?path=/data/Passenger/HY/HMA/ENG/DTC-images/HY-EF13-IMAGES-ENG/ef24035011.jpg

May 19, 2008 | Hyundai Motor 2004 Sonata

Not finding what you are looking for?
2006 Nissan Sentra Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...