Question about 1996 Ford Explorer

1 Answer

1996 ford explorer

It will start fine one time then an hour later wont

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 240 Answers

Check this link. Hope this helps:)

http://www.ford-forums.com/ford-explorer/888-95-ford-explorer-not-starting.html

or
Go get an inline spark tester. (Harbor Freight 3 bucks) If there is spark in the plugs then it is probably the fuel pump. Check\replace the relay first. If that not it then your fuel pump is probably bad. If you know how you can check the fuel rail pressure with a gauge to see if the pump is working. You can try to listen for the pump. You have to listen real close. Get inside the vehicle (close the doors)and put your ear to the floor in the cargo area. Have someone turn the key to the second click right before starting it. You should here it pressurize the fuel lines. If you done hear this then your fuel pump is bad. I hope this helps.

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford explorer starts good one second and wont start the next until you try a few times


Check for loose or broken connecting wires to your sensors (MAF, camshaft position, etc.) and engine control unit.

Oct 19, 2012 | 1996 Ford Explorer

1 Answer

1996 ford explorer wont start after it has been driven


replace fuel pump relay if fuel pressure test ok then have coil packs tested

Mar 26, 2012 | 1996 Ford Explorer

2 Answers

Replaced egr valve pressure sensor upstream and downstream oxygens sensors egr tube new egr valve new idle air control valve runs fine and idles fine one minute then starts idleing rough and dies starts...


r u gonna keep replacin parts-or do a scan 1st--not all problems show on a readout-like vacuum leaks or a failin computer--throttle body probly needs cleanin

Sep 06, 2010 | 1996 Ford Explorer

1 Answer

1994 ford explorer limited anti-theft


Two tips:
* If your anti-theft system is sounding (horn honking/lights flashing)you press the panic button on your key fob to shut it off.

* If your anti-theft system is armed (but not triggered) it is disarmed when you unlock the door(s) using your unlock button on your keyfob, the key pad on the driver's door, or your key.

Hope help with this. Good luck (remember rated this).

Feb 25, 2010 | 1994 Ford Explorer Limited

4 Answers

96 ford explorer v8 wont start all the time


try replacing the fuel pump reley
they are a little bit funny in fords
i had a ford 1 time thet ran fine for hours in the driveway but go 2 blocks and the truck would die dam reley took me 2 monthes to diagnose once i did i had a great vechiale untill a dui hit me broad side

Jul 25, 2009 | 1996 Ford Explorer

1 Answer

Please help me


If the truck has 75-100,000 miles then it is very likely it is the fuel pump, when it quit did it just turn off or did it loose power and then shut off?

Dec 31, 2008 | 1996 Ford Explorer

1 Answer

96 ford explorer eddie baurer edit. heat dont work, worked fine then i turned the truck off and back on like 5mins later and it stopped working, checked the fuses and they looked ok, and thing else i...


That component is an electric motor that controls the blend door. The motor has a male square shaped drive that fits into the female drive in the blend door. It is common for the blend door to crack. The motor can be easily replaced however if the blend door is broken you will have to remove the heater box. This means that the entire dash must be removed for access. I think mitchell book time on this job is around 7 hours.

Dec 07, 2008 | 1996 Ford Explorer

Not finding what you are looking for?
1996 Ford Explorer Logo

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...