Question about 1992 Honda Prelude

1 Answer

My brake light and parking light are not working and the bulbs are still good...i have checked their fuses too!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 378 Answers

You need to trace it using DMM. verify the voltage in fuse and in bulb socket. check the ground.

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My inside dashboard lights and back break light suddenly stopped working so cant drive it at night. Its a 99 honda prelude. I've tried changing the light bulbs and the fuse but still not working.


If the dash lights are on the same circuit as the park lights. Chances are if no dash lights... no park lights. Unless the dash light dimmer switch is on the low position. Check park light fuse. If no brake lights... which are on a different circuit and you are sure the bulbs are ok check brake light fuse. If fuse ok, unplug brake light switch at brake pedal and cross the terminals with a jumper. If brake lights work, the brake switch is faulty. If still no brake light operation suspect a wiring issue

Jun 18, 2015 | 1999 Honda Prelude

2 Answers

Brake lights work but not parking lights


check bulbs there is two filaments , one for brakes and one for parking lights

May 03, 2015 | Mercury Grand Marquis Cars & Trucks

2 Answers

WHY DO BRAKE lights and parking lights do not work


Hi, 1st check the bulbs in the back. Then check the fuses for brake and park. If they are OK the next would be the switches and ground connections. Good luck.

Nov 15, 2011 | 1995 GMC Sierra C1500

1 Answer

Parking lights and brake lights won't work


are you putting back the correct amp fuse.

May 20, 2009 | 1999 Kia Sephia

1 Answer

All brake lights suddenly stopped working changed bulbs park light fuse and cant find any blown fuses what else can it be


brake switch on the pedal bad.bad relay. do you have a second fuse box if so check it. look at the wiring see if it is frayed or chafed check the connections.check all the fuses not just the ones labeled brakes.switch the relay with one that you know is good like turn signal and see if the turn signal works then check brakes.use a 12 volt test light check the brake switch and probe the wires. hope this helped if not write back and i'll give you more ideas.

Apr 24, 2009 | 1996 Buick Park Avenue

1 Answer

Left rear brake light stopped working but bulb and fuses are OK.


These are Dual Function Bulbs. They control the Parking Lights and the Brake Lights. This Bulb is Burnt out on the Brake Coil inside the Bulb. I have actually seen Bulbs that were Bad But you could not Tell by jast looking at them. It should be fine with a New Bulb. Please Rate My Response! Thanks!

Feb 05, 2009 | 1999 Ford Expedition

1 Answer

Brake lights


the bulb is a dual filament try replacing the bulb

Nov 19, 2008 | 1992 Honda Accord

2 Answers

Rear brake lights are not working


Hi,

There are a couple of probable reasons why the brake light are not working, they are:
  • brake switch - underneath the dash. It is activated when the brake pedal is pushed. It is a spring loaded switch and is normally off. If the sprin is defective/missing then the switch will not activate;
  • brake light fuse;
  • bulbs;
  • corroded bulb socket - most brake lights are integrated with the rear park lights. The bulb socket would have 2 contacts, try checking if they are clean and reaches the mate in the end of the bulb;
  • wrong installation - the bayonet socket of most park/brake lights combo are offset, there is a right and wrong way if installing it into the bulb socket;
  • loose wire - it would be required to trace the brake wire to where it joins the rear harness;
  • loose ground - same as above or a workaround is to wire an additional ground wire from the housing of the bulb socket to any screw that is connected to the body ground.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jul 29, 2008 | Mercedes-Benz CLK Cars & Trucks

Not finding what you are looking for?
1992 Honda Prelude Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...