Question about 2003 Ford Escape

2 Answers

Abs light troubles

2003 ford escape had a bad blowout at 80 miles per. now abs light stays on is there a reset or is sensor bad?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2003 ford escape xlt; abs trouble light and brake noise; found speed sensor ring broken and out of place...
cleaned (wire brush) mounting area, epoxied ring back in place, then when epoxy set superglued also (still split so...?); when set, lightly sanded raised bars on ring.
ended up having to do both front rings, same process.
no more abs light and braking issues resolved.
seems better/easier/cheaper than total tear down and pressing new rings in (way expensive and beyond me anyway so win/win!

Posted on Oct 03, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Possibly have a bad speed sensor or something else. You will need to have it hooked to a computer to find out what is going on with it.

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 mountaineer trouble code c1233


Tabitha, trouble code C1233 left front wheel speed sensor input signal missing. Possible causes:
Faulty left front wheel speed sensor, harness is open or shorted, circuit poor electrical connection .
Have a good tech. diagnose and estimate repair.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
C1233 Ford Left Front Wheel Speed Sensor Input Signal Missing

How To Diagnose ABS Code C1233 C1234 on Mazda Ford

Ford Escape ABS Tone Ring Install C1233 C1234

Apr 29, 2016 | Cars & Trucks

1 Answer

2005 Ford Escape - have awd. When i encounter bad roads, the 4wd light flashes. It resets it self when i shut off the ignition; however my abs light has never come on and their were no error codes o


Usually it means there is a component of the system that is not working. It could be a sensor or mechanical problem.
You'll probably need to take it to a dealer or major shop to get it tested.

Dec 06, 2012 | 2005 Ford Escape

1 Answer

Abs and traction control off lights on after new tires installed on buick lesabre 2003


if you have a code reader available,reset trouble codes,if that doesn't work you probably need to have it checked out.they may have dis lodged a sensor when they changed the tires.unless you radically changed tire size it shouldn't be the tires

Nov 18, 2017 | 2003 Buick LeSabre

1 Answer

2003 Escape. 150,000 miles. Ck engine light is NOT on. Cuts out and guages reset. Seems to happen when speeding up.


I had a problem like this that turned out to be the crank shaft sensor which, was very easy to replace. The sensor can be seen when looking down into the engine on the passenger side, near the accessory belt area.

Jul 13, 2011 | 2003 Ford Escape

2 Answers

After changing the front brake pads on my 2003 ford escape and a week later my ABS light comes on after just a few minutes,or stops, I'm not sure which. Until the light comes on it feels like the ABS...


if you feel grinding then you have not properly installed the pads
the abs sensor is in the same area so maybe you damaged or partially loosened the sensor

Dec 22, 2017 | Ford Escape Cars & Trucks

1 Answer

ABS & traction control just went out on 2008 Ford Escape.


Chances are it is a bad ABS sensor. Need to get scanned to know for sure and which one.
Not much i know but I hope that helps.

Feb 03, 2010 | 2008 Ford Escape

2 Answers

ABS light on Flashing 4wd 2005 Ford Escape


yeah my abs has flashed for years now= bad sensor wont affect your driving

Jul 25, 2009 | 2005 Ford Escape

1 Answer

ABS light and trac control light off


YOU NEED TO HAVE ABS CONTROLLER SCANNED FOR DIAGNOSTIC TROUBLE CODES..THE SYSTEM HAS DETECTED A FAULT..A GOOD SCAN WILL YOU LEAD DOWN THE PATH TO FIXING THE PROBLEM..YOU CAN SEE IF WHEEL SPEED SENSORS ARE NOT WORKING,IF YOU CAN'T COMMUNICATE WITH CONTROLLER,ETC..LET ME KNOW WHAT IS FOUND

Jun 11, 2009 | 2003 Chrysler Town & Country

1 Answer

ABS light comes on at 80 Miles an hour, Hyundia


more then likely its a wheel speed sensor setting off your abs light

Mar 10, 2009 | 2003 Hyundai Accent

Not finding what you are looking for?
2003 Ford Escape Logo

487 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...