Question about 2002 Pontiac Grand Prix

Open Question

Where is the mall pgm fuse 2002 pontiac grand prix

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
davidg65
  • 26 Answers

SOURCE: 2002 Pontiac Grand Prix Thermostat

as you face the engine the thermostat bell is on the right (drivers side) Follow the radiatoe hose. Remove the two bolts and raise the bell still attatched to the hose. the thermostat is there with the rubber seal. You can gently pry the thermostat out with a screwdriver or something similar. Put in new thermostat be sure it is the same as the old one, and then replace or change the seal (be sure it is the smae size and thickness as the old one as I got the wrong size from Napa) Then replace the bell, and tighten, but not over tighten. I hope this helps!

Posted on Jan 31, 2009

Ad
  • 1 Answer

SOURCE: LOOKING FOR A FUSE BOX DIAGRAM FOR 2004 PONTIAC GRAND PRIX GT

It's under the hood, on the driver's side, under a square, black box with a lightning symbol on it. Loosen the flower-shaped screw that holds the lid of the box down, remove the lid, flip it upside down and when you look at the inside of the lid, you'll see a map of all your car's fuses. There's also a fuse diagram on the very end of the dash, but it's accessible only when you open the driver's side door. When you're driving, that end of the dash is blocked by the closed door.

Posted on Jul 01, 2009

  • 58 Answers

SOURCE: 2002 Pontiac Grand Prix GTP / Multi-function Switch

i have the sameproblem. Dealer part was quoted to me at $510.00. All after market parts stores were $350- 450. Try moving the emerg. flasher button while you step on the brakes and someone else watches the lights. I jammed paper beside the button and they work until I can fix it.I had to order the multi-function switch. and you have to pull the air bags to replace it.

Posted on Jul 15, 2009

  • 169 Answers

SOURCE: 2002 pontiac grand prix abs light is on all the

check the fuse under the hood, you may have to disconnect batterty to do so, this fuse goes and is hundreds of dollars cheaper than if it is something else~! If the ABS IS broken and you are comfortable without it, just remove the fuse and the whole ABS system is disabled leaving you standard non-abs braking without doing any harm.

Posted on Aug 16, 2009

  • 92 Answers

SOURCE: 2004 PONTIAC GRAND PRIX FUSE BOX DIAGRAM

The diagram is on the fuse box cover or lid (depending on which fusebox, cabin or engine compartment. The diagram is also in the owner's manual.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the MALL PGM on 06 pontiac G6


Your vehicle has a No MALL PGM Fuse !
2004 and up models do not have a mall pgm fuse. You'll need to take it to a GM dealer to program the remote. What is the problem you are having ?
No

Nov 13, 2016 | 2006 Pontiac G6

1 Answer

How do I program keyless entry on my 2002 grand prix? I have tried the way I found by removing mall pgm fuse n open door n turn key to acc. Doesnt work. The fob I have was for gp why it not work?


Important: All transmitters which are to be recognized by the remote control door lock transmitter (RCDLR) must be programmed in a single programming sequence. If the system is placed in program mode it will erase all previously programmed transmitters upon the receipt of the programming signal from the first transmitter. Up to four transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle.
  1. Remove the ignition key from the ignition lock cylinder.
  2. Close all of the doors.
  3. Remove the MALL PGM fuse from the fuse block.
  4. Insert the ignition key into the ignition lock cylinder.
  5. Turn the ignition to ACC.
  6. The body control module (BCM) will perform the following in order to identify the type of BCM installed in the vehicle:
    ?€¢
    Flash the seat belt indicator 1, 2, or 3 times.


    ?€¢
    Chime 1, 2, or 3 times.

  7. Turn the ignition to OFF, and then back to ACC within 1 second.
  8. The BCM may begin to chime and flash diagnostic trouble codes (DTCs). If the BCM has stored any DTCs, refer to Diagnostic System Check - Body Control System in Body Control System.
  9. Open and then close any vehicle door.
  10. The BCM will chime in order to confirm that the programming mode has been entered.
  11. Press and hold the transmitter LOCK and UNLOCK buttons simultaneously for approximately 14 seconds.
  12. Important: After approximately 7 seconds the BCM will chime once to confirm that synchronization has been completed. After approximately 14 seconds the BCM will chime a second time to confirm that the programming has been completed.
  13. Repeat the previous step in order to program each additional transmitter.
  14. Remove the ignition key from the ignition lock cylinder.
  15. Install the MALL PGM fuse into the fuse block.
  16. Operate the functions of each transmitter in order to verify correct system operation.

Jun 12, 2015 | 2002 Pontiac Grand Prix

1 Answer

How to reprogram a key fob


IMPORTANT: Before entering programming mode, have in possession all of the remotes you
will be useing on the vehicle. Once you program the remote. all previous remotes that were
programmed will be erased from memory. The other remotes will not be functional until you
program the them again.
1. Remove the key from the ignition.
2. Close all doors.
3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or
owner's manual to properly locate the "MALL PGM" fuse.
4. Insert the key into the ignition, and turn to the ACC position.
5. Turn the key to OFF and then back to ACC within 1 second.
6. Open and close any vehicle door. A chime will be heard when the system enters into
programming mode.
7. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds.
IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime
that will confirm successful programming.
8. Repeat step 7 now for each additional remotes to be programmed including any existing
remotes.
9. Remove key from ignition.
10. Install the "MALL PGM" fuse back into the fuse panel and test remote(s).

Sep 10, 2012 | 1999 Pontiac Grand Prix

1 Answer

WHERE IS THE MALL PGM FUSE PANEL LOCATED ON A 2000 PONTIAC GRAND PRIX


There is a 10A MALL/CLUSTER FUSE in the fuse block. There is no MALL/PGM fuse panel.

Oct 22, 2010 | 2000 Pontiac Grand Prix

1 Answer

Where is the mall pgm


These are normally located in engine and are easy to spot black boxes .

Jun 22, 2010 | 2005 Pontiac Grand Prix

1 Answer

I need to program the key less entry


IMPORTANT: Before entering programming mode, have in possession all of the remotes you
will be useing on the vehicle. Once you program the remote. all previous remotes that were
programmed will be erased from memory. The other remotes will not be functional until you
program the them again.

1. Remove the key from the ignition.
2. Close all doors.
3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or
owner's manual to properly locate the "MALL PGM" fuse.

4. Insert the key into the ignition, and turn to the ACC position.
5. Turn the key to OFF and then back to ACC within 1 second.
6. Open and close any vehicle door. A chime will be heard when the system enters into
programming mode.

7. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds.
IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime
that will confirm successful programming.

8. Repeat step 7 now for each additional remotes to be programmed including any existing
remotes.

9. Remove key from ignition.
10. Install the "MALL PGM" fuse back into the fuse panel and test remote(s).

May 10, 2010 | 1998 Pontiac Grand Prix

1 Answer

How do i program the remote


IMPORTANT: Before entering programming mode, have in possession all of the remotes you will be useing on the vehicle. Once you program the remote. all previous remotes that were programmed will be erased from memory. The other remotes will not be functional until you program the them again.


1. Remove the key from the ignition.


2. Close all doors.


3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or owner's manual to properly locate the "MALL PGM" fuse.


4. Insert the key into the ignition, and turn to the ACC position.


5. Turn the key to OFF and then back to ACC within 1 second.


6. Open and close any vehicle door. A chime will be heard when the system enters into programming mode.


7. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds.

IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.


8. Repeat step 7 now for each additional remotes to be programmed including any existing remotes.


9. Remove key from ignition.


10. Install the "MALL PGM" fuse back into the fuse panel and test remote(s).


Thank you for using fixya and good luck

Apr 27, 2010 | 2000 Pontiac Grand Prix

Not finding what you are looking for?
2002 Pontiac Grand Prix Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...