Question about Chevrolet Venture
We have tried several versions of the reset procedure with no joy. The on/off button has been tested by checking the continuity of the overhead open/close button. Activating either the overhead or B pillar buttons yields only a clicking from the right rear quarter with zero activity at the door.
The clicking may be from a stripped control gear/ rod that opens and closes the door .
Posted on Mar 18, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I've leased two Town and Country vans over the past 4 years, and actually purchased the latest one after the lease. In both vans the sliding doors, normally the drivers side, reacted teh same way. If the door was closed it would open, stop a one point, and then return to the open position. At times I could get it close. But over time the doors stoped working all together.
It is not due to the switch or the motor. Most cases like this (in in both of mine) it is due to the repetitive use of that door, and the realitive inflexibility of the wire harness. Over time, and with more uses (in my case the driver side sliding door was used alot) the wire in the harness fails. Picture it as a willow branch. One snapped off of a tree it first is green and flexible, and bends pretty well into any form. But over time, with age and repetitive bending, it will break.
The only recourse is a new harness, as the wire/wires are broken somewhere in the harness (the belt chain in the lower track of the door). I was temped to take it apart and try to repair it myself, but as the parts were under warranty (I have the extended 85,000 mile), I opted to have the professionals handle it. The repair without the warranty is under $200 typically (parts and labor). Good luck.
Posted on Oct 09, 2008
SOURCE: Power door is not delatching
there is a door lock actuator that has failed, it releases the latches so the door can open. you need to remove the door panel. unbolt the window and tape it as to hold the window up then remove the window regulator assembley then unbolt the lock actuator from the back side.
Posted on Apr 25, 2009
READ YOUR MANUAL. THERE IS A SEQUENCE INVOLVING REMOVING A FUSE WHICH RESETS THE ELECTRIC DOOR OPENER. IT IS DESCRIBED IN THE MANUAL. EASY TO DO ONE YOU HAVE THE BOOK IN HAND.
Posted on Apr 27, 2009
sounds like the door sensor switch is malfunctioning and when almost closed it reacts like it is blocked (such and kid in way) and opens for safety. try flushing trach with hose and try again, if not u need a good repair manual such as chiltons($25 most parts stores ) or see mechanic
Posted on Jul 07, 2009
Tips for a great answer:
Apr 06, 2014 | 2002 Pontiac Montana
Mar 18, 2014 | 1998 Jeep Cherokee
Jan 19, 2010 | 2004 Chevrolet Venture Passanger
Nov 24, 2009 | 2004 Chevrolet Venture Passanger
May 12, 2009 | Chevrolet Venture Cars & Trucks
Nov 24, 2008 | 2004 Chevrolet Venture Passanger
Sep 03, 2008 | 2002 Honda Odyssey
Aug 30, 2008 | 2003 Chevrolet Venture Passanger
72 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: