2002 Jeep Grand Cherokee Logo
C
Chris Feagles Posted on Mar 18, 2014
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Turn key and starter does not turn - 2002 Jeep Grand Cherokee

2 Answers

Andr Munniks

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Apr 13, 2019
Andr Munniks
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Apr 13, 2019
Answers
1
Questions
0
Helped
161
Points
3

Dashboards lights, headlights, interior lights, all on, but the engine does not start. And after a while it does crank up for a period of time and then after months it fails again. So what was it? A corroded (yellow)cable connector on the starter. So easy, but because the start engine of a Jeep Grand Cherokee WK is placed in a almost unreachable spot (if you don't have a bridge, like many of us)you will not discover it very quickly...

_-__-___-_

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Jeep Master 20,706 Answers
  • Posted on Mar 18, 2014
_-__-___-_
Jeep Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Apr 06, 2013
Answers
20706
Questions
2
Helped
6803888
Points
57965

My guess, A/T tranny car.........?????
dies it jumper cable jump start off a running car.?
yes, battery bad, battery not charged or charging system in car bad.
no, then will the gear shift, or start in neutral.
do 1 to 6.
http://www.fixkick.com/nocrank.html#tricks

7 & 8 is m/T cars. they start 3 ways.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

Starter has power but don't tick click nothing

Check the ground and hit the starter while some one turns the key to start. one more thing make sure the netural safety switch is working.
0helpful
2answers

2005 GMC Envoy XL. Will not engage starter. Like something electrical. Turn key and nothing. Worked fine until now.

Could be the neutral safety switch if it won't crank in neutral or park, could also be the starter has failed.
0helpful
1answer

2002 hyundai Santa fe will not start. I turn key and starter turned for 3 seconds then stopped and now when i turn key NOTHING. I hear a circuit sound in back of car when i turn key but no other sound. ...

Definitely a starting system problem. That sound you hear in the back is the fuel pump.

Starting system circuit components (besides wiring harness)
1. Ignition Key Switch - closes the starter relay control circuit to energize the relay and close the contacts inside the relay (you can check this by locating the relay in the underhood fuse/relay box and have a friend turn the key while you listen/feel if the relay 'clicks'
2. Starter Relay or its Contacts
3. Starter Solenoid - pushes/pulls the starter gear into the engine's flywheel ring-gear and its contacts close to provide battery power to the starter itself.
4. Starter itself - poor brush contact with the armature's commutator will prevent the starter to spin/turn

If you are 'Electrically' talented, you can check to see if you're getting battery power to the starter solenoid by using a simple 12 volt test light/bulb. Connect one lead to the starter solenoid terminal and the other to chassis/engine ground and have a buddy turn the ignition key - if the light turns 'ON', then you know that particular circuit is OK but the starter solenoid is not energizing to push the starter gear into the flywheel ring-gear to turn the engine over. If it doesn't, the problem is elsewhere (wiring, starter relay, starter relay control circuit, etc).

You can have a qualified Hyundai Service Technician properly diagnose your vehicle. OR, you can Go to www.hmaservice.com and register your vehicle by VIN #.. you'll then have access to wiring diagrams, shop manuals, service bulletins, illustrations, etc.
1helpful
2answers

Turn key and starter stays engaged. Turn key off

The starter solenoid is failing. Sooner or later the starter will probably not disengage after you turn the key off. Then you'll have to disconnect the battery in a hurry. It's no fun. And at that point the whole starter will probably have to be replaced. Depending on how long it takes you to unhook the battery. Trust me. That is no way to start your day. It's really bad for your blood pressure. Good Luck.
0helpful
2answers
0helpful
2answers

Starter relay clicks when you turn ignition key on

no this is either caused by a defective starter solenoid (on starter) or a defective positive battery (red) cable, both are common on this year of explorer.
4helpful
1answer

1994 Toyota Camry 4 cylinder Starting problems

your starter is bad.... the two contacts inside the solinoid are worn out only way to fix is replace the unit as a whole bet ya you get click click click then my start.. bet my life on this one been fixin toyotas for 20+ years
1helpful
1answer

Sometimes starter clicks, sometimes turns over engine

you may have to replace he starter and starter cylinoid
Not finding what you are looking for?

171 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...