Question about 1991 Plymouth Sundance

1 Answer

Crankes but won't start

Checked for spark at coil and spark plugs, no spark.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Plymouth Master
  • 45,552 Answers

Run fault codes and check for cam/crank position sensor problem/ Check that the camshaft is turning ( broken timing belt/chain) check operation of the immobiliser

Posted on Mar 18, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car turn over wont crank


what you mean is the car turns over won`t fire/start. you need to find out if you are missing fuel or spark. check for codes. if you have no fuel it maybe a pump or plugged fuel filter. if you have no spark then it could be many things. like crank/cam sensor, poor wiring or connections, poor plugs, wires, ignition coil, even possibly a computer. check the first 3 things and go from there.

Mar 22, 2015 | 1997 Buick Riviera

2 Answers

Saturn won't start it cranks but won't turn over. There is no fire between the coil paks and spark plugs but can't figure out why


Someone would need to check for power and ground at the coils and that the timing belt is ok.

Dec 06, 2012 | 2001 Saturn SC

1 Answer

2004 lancer won't sart


have you got the timing set correct ,and did you fit the timing belt with all the timing marks lined up ,etc , if there correct ,check for spark ,by pulling off a spark plug lead and fitting an old plug into the lead ,then crank the motor ,dont hold the plug with your hand ,use insulted pliers ,if you have spark, ,if no spark check coil wiring ,coil, crank angle sensor,

Jun 08, 2012 | Cars & Trucks

1 Answer

My car won't start,seems like no spark?/,just turns over and over


before u replace the whole dist. have u first checked for fuel delivery on the carb or fuel rail, and then if u have that then check the spark plug wire by removing one while cranking by arcing to metal , if you see spark then dist is good if not then replace, but if dist is good and still no start then check coil pack and or all fuses

Apr 25, 2012 | Cars & Trucks

1 Answer

1992 mx-3 v6 won't start. will hit sparaticly as if about to start but just won't catch. checked crank pos. sensor. need suggestions on how to proceed.


Check for a blue snapping spark on 2 or 3 plug wires(or all of them). If you get good spark, then ignition is likely not the problem. A weak or sporadic spark could be a bad coil or coil pack, or a bad ignition module (the ignitor).Check the coils with a volt-ohmmeter per the specs for your car. The ignitor can be tested at a parts store.
If spark is good, check fuel filter, fuel pressure, check timing marks on crank pulley and cam marks, Try a little starting fluid in the air intake and see if it runs for a moment. If so, then it's likely a fuel delivery problem. If no change, then it's likely an ignition circuit problem.
Good luck.

Dec 30, 2011 | 1992 Mazda MX-3

1 Answer

1999 chev blazer won't start new fuel pump


So, do you hear the pump buzz on, when key is on? If that's good, then check your ignition circuit: check for spark at a plug. Use insulated pliers, hold end of plug wire 1/4 inch form engine bolt or ground source. When cranked, you should see a bright blue spark. Yes? Try another plug wire, too. No? Try another plug wire. If you have NO spark, could be your coil, coil pack, crank position sensor, ignition module. I would recommend using a diagnostic flow-chart to go through the ignition circuit. That way, you are not replacing unecessary parts_Expensive! Of course, if you have spark at plugs, your ignition circuit is good! Then you have to look further, like your injector circuit. Good luck.

Oct 30, 2011 | 1999 Chevrolet Blazer

5 Answers

Truck wont crank. we have put new distributor cap, rotor button, coil pack, plugs, wires, and fuel pump. we also checked our firing order.


you said you repl dist cap that means you don't have a crank sensor you have electronic ing module. remove your elec ing module have it tested most auto parts stores could test your module, or check your coil at the neg terminal. should have power. if not you lost your primary volt from your batt.your secondary power is coming from your electronic ing module from the module to the pos terminal on the coil, when the eng cranks,from the coil to the dist cap , from the dist cap center to the rotor then out to the plugs,this all happen pervided the timing belt or timing chain is ok. the cumbustion chainber needs 3 things , thats fuel, air, and spark.

Apr 17, 2011 | 1996 Chevrolet K1500

Not finding what you are looking for?
1991 Plymouth Sundance Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...