Question about 2000 Cadillac DeVille
Do you have to remove the front bumper
You should be able to get to it from under the hood - maybe crowed under there but take a good look first
Posted on Jan 22, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
pop the hood. locate two long metal pins - one goes in horizontally, one goes in vertically. Pull the pins and the assembly comes out. remove top rubber cover. Unplug bulb. Remove. Replace. Repeat.
Posted on Jan 29, 2009
Well according to my mitchell manuel you don't have to.here is the procedure.
1. open the hood.
2.Remove the push-pin retainer's that secure the top of the upper facia and grill assembly to the upper tie bar to allow the upper facia and grill assembly to flex forward.
3. remove ther bolt and push-pin retainer that secures the top of the headlight assembly to the upper tie bar.
4. Gently pull the upper facia and grill assembly forward to access the bolt on the inboard side of the headlight assembly
5. Pull the headlamp assembly straight out to disengage the the snap in retainer at the lower outboard back surface of the assembly. Turn the assembly so that the inboard assembly clears the front facia.
6. pull the assembly out and away from the veh.From there you'll be able to access bulbs.
be careful not to touch the bulb with fingers or oil in skin will blow bulb.
Posted on Aug 19, 2009
To remove and replace head light bulb labor time per Mitchell labor guide 1.4 hrs each X shop labor rate.Find out what there labor rate is.Head light bulb high or low beam (Halogen) O.E run about $17.00 each.
Posted on Jan 06, 2010
SOURCE: how to remove front and
go to auto parts store or retail store to get a tool called panel popper. it has 2 prongs shaped like a wrench on a shaft (like a screw driver). check panel for screws to remove and after remove screws, use panel popper to pry the panel up. put the panel popper near the plastic tabs that hold the door in place.
Posted on Sep 18, 2010
Tips for a great answer:
Oct 31, 2014 | Cars & Trucks
Sep 19, 2014 | 1988 Cadillac Sedan DeVille
Sep 13, 2014 | Cadillac CTS Cars & Trucks
Aug 11, 2010 | 2000 Toyota Celica
Jul 08, 2010 | 2006 Cadillac STS
May 15, 2010 | 2000 Ford Escort
Jan 06, 2010 | 2004 Cadillac CTS
Jun 13, 2009 | 2003 Cadillac CTS
Jan 11, 2009 | 1997 Cadillac DeVille
Nov 24, 2008 | 2003 Cadillac CTS
89 people viewed this question
Usually answered in minutes!