2003 bmw 760 li has P021 code I replaced the Cam position sensor but code still remain

Colin Stickland

• 22516 Answers
• Posted on Nov 04, 2008

SOURCE: 98 ford escort

check the oil level in the transmission

SOURCE: 03 Taurus with DTC P0340, P1336

I would think it would be just the Camshaft Position Sensor.I looked up the codes and they say pretty much the samething.


P0340 Ford Camshaft Position Sensor Circuit Malfunction


P1336 Ford Crankshaft/Camshaft Sensor Range/Performance

SOURCE: Overheating problem

With the sensor unplugged and the fan works,, replace the new sensor,,,,, it is probably defective. I have seeh this before.

steve morris

• 1675 Answers
• Posted on Mar 21, 2010

SOURCE: BMW X5 CAMSHAFT POSITION SENSOR A .SHOW DIAGRAM

hi i have a diagram if you would like it i could email it to you and there are 2 of them does it say which one it is? you can email me at
[email protected]
and i will send you the diagram hope this helps

SOURCE: Code: P0340 Cam shaft position

Check your PCM GROUND, And Also Disconnect and Inspect ALL ENGINE Harness Connectors, FORD Has Had Many Problems Over RECENT Rears With FAULSE CODES Due to Poor GROUNDS @ ENGING/BODY/COMPONENT/ GROUND Locations, And ALSO HARNESS CONNECTORS with Poor Connections, It May Not SEEM REAL , But I Have Ran into this COUNTLESS Times.