Question about 2003 Chrysler 300M

3 Answers

Check Engine Light / Chrysler 300m

My check engine light has come on just this evening. 110,000 miles, however it has a rebuilt engine, and has just come from the shop which cost me more than the car is worth in repairs...$4000.00! There aren't many shops around, and the last one assured me that the car was as good as "brand new," but the light being on would indicate otherwise...wouldn't you say? They're going to try to sell me as much as they possibly can...is this potentially a simple fix, they've told me already that the check engine light means something expensive.

Shift shock is getting worse and worse.

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I have a 2002 300m and my check e light came on 2 days ago i ttook it to a mechanic in dallas and he told me it would be 500 to fix it so i took it to autozone to have them put the free dianostics test and it ended up being the gas lid not on properly they said it was common on this model they reset my battery for me and my light is still off today

Posted on Jun 17, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chrysler Master
  • 1,348 Answers

Get a different shop.scan the code to see what triggered the check engine light.a loose gas cap can trigger an evap code,and a 02 sensor can trigger an emissions code .the air filter can cause the computer to reduce fuel and set a code for too lean a burn.....get a different mechanic.i had an 03 camry with a check engine light in the shop yesterday and the gas cap was leaking with 1psi pressure.cost 15 bucks and 1/2 hour time.

Posted on Jun 14, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My check engine light came on took it to the dealer they said its the O2 sensor. I have a warranty on this vehcile up til 91000 miles Im at 76000 now. Do you think that its covered under warranty?

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 automatic PT Cruiser lights all PRND all at the same time, the check engine light comes on and the speedometer stops working, and it won't shift out of the first gear. The RPMs just get highe


Jesse A Shelby, my best guess is the
(transmission control module) you said check engine light is on that means codes are being stored , OBD needs to be scaned that's a start. (interesting name).
Woody.

Sep 08, 2014 | 2005 Chrysler PT Cruiser

1 Answer

Chrysler 300m engine light stays on


you don`t say what light is on. check engine, engine oil light. if its check engine light there is a code set in the PCM that will have to be checked out then diagnosed.

Aug 31, 2014 | Cars & Trucks

1 Answer

Change high beam bulb chrylser 300m


My 2000 Chrysler 300m the intake on the engine loose how do I replace it and my check engine light is on show me a diagram.

Apr 03, 2014 | 2000 Chrysler 300M

1 Answer

I have a 1999 Chrysler 300M. Simultaneously, the Check Engine light came on, the speedometer stopped working, and the car doesn't shift out of 2nd gear. What's the likely problem?


these vehicles have alot of problems with the tcm( tranmission control module) internal failures of trans speed sensors. your car is currently in "limp in mode" to protect your trasmission!!!

Sep 02, 2012 | 1999 Chrysler 300M

2 Answers

2001 Chrysler 300M Engine Light on all the time


Hello, my engine light was on for a VERY LONG time and everytime I got it checked no one could tell me what the problem was because things always checked out fine. The "code" says its a loose gas cap or something, but it wasnt that. My 300M also was having A HARD TIME STARTING UP for about 8 months and leaking coolant for about a month. I finally found a mechanic who knew what he was doing; 1. Leaking Radiator 2. Coolant found in #2 or #3 cylinder. The cause of this was a busted HEAD GASKET. If your 300M has trouble starting and the Engine light stays on have a mechanic check your engine for a busted head gasket and see if all your cylinders are firing correctly. I had to pay $2600 for a new Head Gasket, Radiator and all new hoses plus labor. CRYING!!!!!!!!!!

I have a 2001 300M 130K - very well kept. Stuff happens...

May 29, 2010 | 2001 Chrysler 300M

1 Answer

Temp guage in red' dummie light on engine not hot


Sounds like a faulty sensor, if the actual temp is 195/215. The ICM is processing the information it receives from the sensor and performs accordingly. A complete diagnostic scan would be helpful in determining the proper repairs needed to correct the problem.
Good luck...i hope this helps, please rate me a fixya.

Jul 17, 2009 | 2001 Chrysler 300M

1 Answer

2003 Chrysler 300m check engine light staying on


The only way, for shure is to go to computer diagnostics. 99% sure that this is some engine sensor, buy only diagnostics will tell who. (130,000 miles, hm lamda. it have only 150,000km live)

Apr 28, 2009 | 2003 Chrysler 300M

1 Answer

Rough reaction on engine at start .


Check engine light on all the time is not a good sign. Go to an Auto parts shop like Advance auto and have them connect a scanner to your car for a readout on why your light is on. Could be many things, probably a O2 sensor.

Jan 12, 2009 | 1999 Chrysler 300M

Not finding what you are looking for?
2003 Chrysler 300M Logo

1,775 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...