Question about 1999 Buick Park Avenue

Open Question

Transmission removal and replacement - 1999 Buick Park Avenue

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the engine


Saturn Transmission Remove & Replace Part 2 of 3 - YouTube

? 13:03
https://www.youtube.com/watch?v=Kau4C5xsjZw
Nov 13, 2011 - Uploaded by Shawn Villalpando
Shawn Villalpando replaces a transmission in a saturn S-series. ... If you remove the pass side you'll need to support the enginebetter. ... Shawn, Have you ever replace a 2003 vue automation with a manual transmission?

Jan 08, 2016 | 2006 Saturn Vue 3.5

1 Answer

SE. How do I remove transmission oil cooler line?


How To Install Replace Transmission Cooler Lines 2001-06 ...

? 5:45
https://www.youtube.com/watch?v=SFEXmxxBMK8
Oct 31, 2013 - Uploaded by 1A Auto Parts
How To Install Replace Transmission Cooler Lines 2001-06 ... In this video, 1A Auto shows you how to remove, replace and install leaking or broken Transmission Cooler ... How To Install ReplaceDo a Front Brake Job 2001-06 Chrysler ... 2003 Dodge Ram 3500 trans cooler replacement how to 11-24-12 ...

Search DODGE MAGNUM Cooling > Transmission Oil ...

www.factorychryslerparts.com > ... > Transmission Oil Cooler, and Lines
DODGE MAGNUM Cooling > Transmission Oil Cooler, and Lines. ... Please let us know what we can do to achieve this goal. ... Our inventory covers the following years of MAGNUM: 2005, 2006, 2007, 2008, ... Click X to remove the keyword.

Leaking Transmission Cooler Line Replacment Recommendations ...

www.dodgeintrepid.net > ... > General Discussion (First Generation)

Dec 12, 2015 | 2006 Dodge Magnum

2 Answers

I have pulled trans pan on 1996 sunfire but still dont see shift silinoids.where are they hiding?


Most of the shift solenoids are located under the "side" pan of the transmission, not the underside transmission pan. The side pan is difficult to access and might best be handled by someone who has removed this type of cover before.

Sep 22, 2015 | Cars & Trucks

1 Answer

Procedure for replacing flexplate on GMC 1998 Yukon 4x4


remove the transmission. Ensure that the torque converter stays with the transmission Do this by removing the torque converter bolts to the flex plate before the transmission is moved back. Remove and replace the flex plate as you would a flywheel.. For detailed r/r for the transmission get a workshop manual.

Nov 22, 2014 | GMC Cars & Trucks

2 Answers

Need to replace a seal on transmission for a subaru legacy 1991 do i need to remove the whole transmission


are u talking about the front main seal? if so ,yes u have to take the trans. out to replace

Sep 06, 2012 | 1991 Subaru Legacy

1 Answer

I just want to know where you add the transmission fluid in a dodge durango? i can't find it


Drive the Durango for 15 to 20 minutes to warm up the transmission fluid. When the fluid is warm, it will drain better and remove more contaminants from the engine. Raise and support the front of the Durango on ramps or jack stands. Place a large drain pan beneath the transmission.

Loosen the transmission pan retaining bolts with a socket wrench. Remove the bolts, but leave one at each of the four corners of the transmission pan. Slowly loosen the remaining bolts a little at a time.Fluid should begin to drain from the seal on the transmission pan. If the pan is stuck, break the seal by gently prying it loose or tapping it with a rubber mallet.

Support the pan with one hand and remove the bolts on one side of the pan. Allow the transmission fluid to drain until it stops. Remove the two last bolts. Remove the pan and drain the rest of the fluid.

Remove the three screws that hold the filter onto the transmission. Note that these screws may be Torx style. Install a new transmission fluid filter.

Clean the transmission pan and the magnet with solvent. Remove the old gasket material from the transmission pan. You may need a scraper to remove it all. Clean the mating surfaces with a lint-free cloth soaked in solvent. Let the pan air dry.

Put the new gasket on the pan and align them. Remove the gasket, apply a few drops of adhesive on the pan and replace the gasket. Realign the gasket before the adhesive dries.

Replace the pan onto the transmission and replace the retaining bolts. Tighten the bolts in a crisscross fashion to 150-inch pounds with a torque wrench. Return the Durango to level ground.




Refill the transmission with new fluid a little at a time, while checking the level often. Continue to add transmission fluid until it passes the "Add" mark on the dipstick, but doesn't pass the "Full" mark.

Start the engine, shift the transmission through all the gears and place the gear selector back in "Park." Recheck the transmission fluid level and add more fluid if needed. Don't overfill the transmission.

Replace the dipstick into the filler tube. Turn off the engine.

Aug 15, 2010 | 1999 Dodge Durango

2 Answers

Shifting solenoid replace


You will need to remove the transmission drain pan to remove and replace the Solenoid.

Jul 12, 2010 | 1999 Dodge Durango

2 Answers

Replace clutch in a 2003 hyundai Elantra


  • The manual transmission in your Hyundai Elantra uses a clutch to engage and disengage the power from the engine to the transmission.
  • The clutch disc is sandwiched between the engine flywheel and the transmission pressure plate.
  • When you switch gears and let off the clutch pedal, there is a short period during which the clutch is slipping to transmit the power in a controlled way. This causes wear on the clutch; over time it will require replacement.
The procedure to replace the clutch is as follows:--- 1) Jack up the Hyundai Elantra and place on jack stands. 2)Drain the transmission gear oil into a catch pan. To drain the gear oil, loosen the drain bolt with a ratchet. 3)Disconnect both drive axles (half shafts) from the transmission. Use a ratchet to remove the two bolts that hold the steering knuckle to the strut. Once those are out, you can easily pull the axles out of the transmission. The steering knuckle is the component that the wheel and strut attach to. 4)You can locate the two bolts to remove by following the strut down from where it's bolted into the engine bay Removing these two bolts allows you to pull the steering knuckle outward so you can pull the drive axle out of the transmission. 5)Remove the exhaust downpipe from the rest of the exhaust. It will be held on with two bolts at both ends and can be removed with a ratchet. Removing this piece is necessary to gain access to the transmission. 6)Disconnect the shifter cables connected to the transmission. Use a ratchet to remove each shifter cable and its housing.Remove the bolts holding the transmission to the engine block (there will be about seven or eight bolts). Place a transmission lift underneath the transmission to hold it and lower it down. If you don't have a transmission lift, you can use a transmission attachment for your jack.Shift the transmission back and forth until it drops onto the jack. Pull the transmission straight back, ensuring that no pressure is put on the input shaft, then lower the transmission to the ground. 7)Remove the pressure plate and clutch disc from the flywheel with a ratchet tool. Then remove the flywheel with a ratchet tool and replace it with a new flywheel. Alternatively, have your flywheel professionally machined at a machine shop then replace it in your car. Torque the flywheel down to the manufacturer's specifications. 8)Place the clutch disc on the clutch disc alignment tool and insert the tool into the flywheel input shaft hole. Connect the new pressure plate to the flywheel and torque the bolts. Once the pressure plate is torqued down, remove the clutch alignment tool. 9)Grease the new throw-out bearing and place it on the input shaft of the transmission. Once the transmission is installed, it will push against the pressure plate. 10) Reconnect all the parts which you removed while replacing the clutch. Thanks. you can rate this solution and show your appreciation.

May 19, 2010 | Hyundai Motor 2003 Elantra

1 Answer

HOW DO YOU REMOVE MANUAL TRANSMISSION TO REPLACE CLUTCH


You'll need to remove the axleshafts. Remove the battery and tray. Disconnect the clutch and shifter from the transmission. Unbolt the starter from the transmission. Support the motor and place a jack under the transmission. Disconnect the transmission mount. Remove the bellhousing bolts and unplug any connectors, also remove the insepection cover. Seperate the transmission from the motor, move the transmission back to get the input shaft out of the clutch disc and lower the transmission down.

Mar 15, 2010 | 1993 Saturn SW1

2 Answers

1997 z71 Transmission removal




  1. Disconnect the battery negative cable.
  2. Raise the vehicle. Support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Disconnect the range selector cable from the transmission bracket and from the transmission range select lever. Refer to Shift Cable Replacement .
  4. Remove the rear propeller shaft. Refer to Rear Propeller Shaft in Propeller Shaft.
  5. Support the transmission with a transmission jack.
  6. Remove the transfer case if equipped. Refer to the appropriate Transfer Case Replacement in Transfer Case:
  7. Transfer Case Replacement (Selectable Four Wheel Drive) . • Transfer Case Replacement (Auto Four Wheel Drive ) . • Transfer Case Replacement (Manual Four Wheel Drive) .
    102329.gif
    tif.gif
  8. Gasoline Engine--Remove the following components:
  9. 7.1. Two bolts 7.2. Two washers 7.3. One nut 7.4. The transmission to engine brace
    102332.gif
    tif.gif
  10. Diesel Engine--Remove the following components:
  11. 8.1. Two bolts 8.2. Two washers 8.3. One nut 8.4. The transmission to engine brace
  12. Remove the transmission rear mount.
  13. Remove the frame crossmember.
  14. Remove the exhaust pipe from the exhaust manifolds. Remove the muffler assembly from the exhaust pipe, if required. Refer to Exhaust System.

  15. 102208.gif
    tif.gif
  16. For the 5.0L Gasoline Engine: Remove the six bolts securing the converter cover to the transmission.
  17. Remove the starter. Refer to Starter Replacement in Engine Electrical.
  18. For the 4.3L Gasoline Engine: Remove the dust plug at the end of the starter mounting port in order to gain access to the converter bolts.

  19. 102335.gif
    tif.gif
  20. For the Diesel Engine and 7.4L/5.7L Engines: Remove the four bolts securing the converter cover to the transmission.
  21. Mark the flywheel and the torque converter alignment.

  22. 102211.gif
    tif.gif
  23. Remove the bolts that attach the torque converter to the engine flywheel.

  24. 102339.gif
    tif.gif
  25. Remove the transmission vent hose.
  26. Disconnect the wiring harness connectors from the vehicle speed sensors and from the park neutral position switch.
  27. Remove all vehicle electrical harness wires, harness clips, tubes, and brackets that may interfere with the removal of the transmission.
  28. Remove the fluid fill tube and the fill tube seal from the transmission. Refer to Filler Tube Replacement .
  29. Plug the fluid fill tube opening in the transmission.
  30. Disconnect the transmission oil cooler pipes from the transmission. Refer to the oil cooler pipe quick connect fittings removal procedure in Oil Cooler Hose/Pipe Replacement .
  31. Plug the transmission oil cooler pipe connectors in the transmission case.
  32. Install the J 21366 in order to keep the torque converter from sliding off of the transmission turbine shaft.
  33. Support the engine with a suitable jack stand before removing the transmission from the engine.

  34. 102341.gif
    tif.gif
  35. 5.0L and 5.7L Gasoline Engine: Remove the studs and bolts securing the transmission to the engine.

  36. 102343.gif
    tif.gif
  37. 4.3L Gasoline Engine: Remove the studs and bolts securing the transmission to the engine.
  38. Pull the transmission straight back from the engine.
  39. Lower the transmission using the transmission jack.
  40. Flush the transmission oil cooler and the pipes whenever you remove the transmission for overhaul, or replacement of the torque converter, the pump, or the transmission case. Refer to Transmission Fluid Cooler Flushing .
  41. Clean the transmission case using a solvent dampened cloth. Do not allow solvent to enter the transmission.
  42. Air dry the transmission.
  43. Clean all hardware and the flywheel cover using solvent. Air dry all the parts.
  44. Inspect all the components for wear and damage.
  45. Inspect all the seals and the fittings for signs of wear.
  46. Inspect the torque converter for stripped or broken weld nuts.
  47. Inspect the transmission case for cracks.

Jul 06, 2009 | 1997 Chevrolet K1500

Not finding what you are looking for?
1999 Buick Park Avenue Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...