Question about 2006 BMW 7 Series

1 Answer

I just changed the battery on the remote of my 750i now the car does not recongnize the remote but it works in the slot also i can lock and unlock but i canot  touch the door handle to unlock anymore plz help thx

Posted by on

  • firehawk75 Jun 14, 2009

    i just tryed that didnot work but holding a unlock button opened the sunroof and all the windows. the message the car plays remote no response

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • BMW Master
  • 1,348 Answers

Hold the lock button down for 5 seconds or so until the car honks.

Posted on Jun 14, 2009

  • kirtec auto Jun 16, 2009

    did you change the battery because it was not working?there must be another issue with it.if you hold it down,and the sunroof or windows are open,it should close them

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Changed battery in keyless remote and now doesn't start car or open doors


  • HOW TO - Change the battery and quick fix your car remote ...

    ? 9:32
    https://www.youtube.com/watch?v=KzCXGXCe0oc
    Sep 1, 2011 - Uploaded by tyreeztt
    Also if your remote isn't working with a new battery please check out this ... TO - Change the battery and quick fix your car remote / keyless entry ...

    Remote Key does not lock / unlock doors after battery change ...

    www.6speedonline.com/.../208274-remote-key-does-not-lock-unlock-do...
    Apr 17, 2010 - After I changed the battery, it would no longer lock / unlock the doors. ... I can start the call and all .. its just the door and trunk lock / unlock function that does not seem to work . ... now your fob is learned... the keyless entry goes into a "sleep" mode to preserve the batt.. if u do not use the ... Still don't work .

    how do i reprogram my lock remote to my car? i changed my ...

    www.cargurus.com > Questions > Hyundai > Tiburon

    CarGurusAug 17, 2009 - i change my battery an now my lock an un lock buttons dont work on my remote how o i reprogram it? ... I have a Hyundai 2003 Tiburon, and the followingworked for me, get ... However for a replacement keyless remote fob, you will have to go to ... And no, they don't do it for free (ranges from $30-$50 in my ...

    Top 5 Tips in Fixing a Keyless Remote ' eBay

    www.ebay.com > ... > Safety & Security > Keyless Entry Remote / Fob
    Key fobs that don't permit entry can be a major hassle for drivers, but fortunately, there... Drivers with a bit of basic electronics experience are often able to replace their ...After confirming that a remote is faulty, try replacing its battery. ... like "Jeep Wranglerkeyless remote," to find listings that will work with specific vehicles.

Jan 26, 2016 | 2005 Ford Freestyle

1 Answer

Doors wont lock or unlock, trunk wont open and remote wont do any good, fuses ok.


Will the switch on the door lock or unlock the doors, if so check the battery in your remote, it may be dead. Remove the key remote from your keychain and there is a slot in the end of the remote that will open it up so you can gain access to your battery. Pay close attention to the way the battery is installed before removing it. Replace the battery and try the door locks again. If they work, then you have solved the problem. If not, you have an electrical problem that you will have to trace down. From the information you have given, this is all I can tell you without seeing the car for myself.

I wish you luck, I hope this helps you find the problem.

Oct 15, 2014 | 2002 Ford Crown Victoria

1 Answer

2004 holden rodeo key wont unlock doors remote or key lights flashing to indicate button pushed


sounds like the battery in the heart shaped remote is flat
green led for unlock or
red led for lock should light up on remote when pressing button if these led lights are not working possibly battery flat
battery part number cr2030
you can get this at a lot of different shops for a couple of dollars and replace yourself
insert small flat blade screw driver in slot where key ring goes and case opens.

Sep 03, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

Key wont' remotely lock/unlock (new batteries)


place key in ignition turn ignition to run position
hit the butons on remote it should re prog the remote
if remote got wet or dirty open up remote and clean contacts

Jan 22, 2010 | 2003 Audi A6

2 Answers

Door lock won't function


If you cannot lock/unlock any doors at all, change the battery on your remote. If all the other doors work, but not the driver's door, there's a malfunctioning magnetic switch on the door.

Dec 05, 2009 | 2006 Scion tC

2 Answers

How to program the key for my bmw 750i model 1997 to lock/unlock the door


BMW 7-Series - Key Remote Programming
Three methods to try:
Method 1:
1. Working from within the vehicle and with the doors shut
2. Turn ignition to position 1 and back to off within 5 seconds.
3. Remove the key from ignition and press and hold the unlock button for 15 seconds during this time press the key lock button 3 times within 5 seconds.
4. Release both buttons.
5. Doors will lock and unlock to show correct programming has occurred.

Method 2:
To do this procedure you need to have one working key and one key that needs to be programmed.
1) Get in and close all doors.
2) Turn on the ignition and turn off quickly. (No more than 5 seconds) to start the process. Next action must take place within 30 seconds.
3) Remove the 1st key.
4) Hold the key up near your left shoulder (this is so it is closer to the remote receiver antenna.
5) Hold down the unlock button and press the lock button 3 times. Release the unlock button and the doors lock which confirms the operation.
6) Quickly repeat steps 4 & 5 for key #2 etc.
If it does not work, try doing the keys in opposite order. Key 2 then key 1, vs 1 then 2.

Method 3:
Alternate if you do not have a working remote
1. Turn key to position 1 five times very quickly 2. Remove key 3. Hold unlock button then press lock button 3 times, release unlock button.
4. If you have another key do the same button pressing within 30 seconds 5. Turn on ignition to finalise.
PLEASE NOTE: This programming procedure programs the remote control part of the key. Any transponder chip for the immobiliser (starting of car) will not be programmed and must be done by a specialist.
window.google_render_ad();

Dec 16, 2008 | BMW 750 Cars & Trucks

1 Answer

Lock/unlock doors


Does the second remote work?  Have you changed the battery and then done any reset required by the manual?  Ten year old batteries are probably shot.

Aug 26, 2008 | 1998 Chevrolet Corvette

Not finding what you are looking for?
2006 BMW 7 Series Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Frankie B

Level 2 Expert

65 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...