Question about 1990 Pontiac Firebird

1 Answer

I have a 1990 Firebird 3.1 Crossfire fuel injection. The problem that I am having is that i am getting no injector singal to the injectors. I have checked fuses, checked fuel pressure, and fire on spark plugs and all checked out ok. Please help

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 57 Answers

I believe this is a dis system.
it sounds like you have a bad crankshaft position sensor, the crank sensor is used by the pcm for fuel injector timing.

on this motor it is mounted behind the harmonic balancer, be carefull when removing the balancer because there thin metal plates indexed into the back of it, these plates are what initiate the crank shaft signal to the pcm.

good luck

wesleyschacht@hotmail.com

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I own a 1990 Chevy Lumina APV 3.1, was leaving for an interview. Suddenly my gas peddle was useless. checked for fuel in tank, made sure spark was there an timing was firing, listened for fuel pump, &...


if it's a trottle body with two injectors.remove fuel pressure,Remove the air filter, remove connector from injector,remove the center pin that hold the air filter case.than remove the top injector from tbi,than pry the injector out,

Aug 02, 2013 | 1990 Chevrolet Lumina APV

1 Answer

I just purchased a 1990 pontiac firebird w/3.1 litre engine. It has been sitting since 2005... I bought it from a neighbor and have worked on car trying to get it running in 2005.... I did get it running...


These cars where prone to problems in the stock antitheft system. This causes injector shutdown. Might be something to look into. Here's a link on that. http://vatspasslockpasskeysecurityhelp.yolasite.com/

Oct 27, 2011 | 1990 Pontiac Firebird

2 Answers

I'm getting fuel to injectors or fuel injection box but it stops there doesn't go any further it is a 1990 VW Cabriolet any ideas? tks


VOLKSWAGENS THE 1990 MODELS HAS CIS - E FUEL INJECTION. THE FUEL INJECTORS CONTROLLED BY AIR FLOW SENSOR PLATE REST POSITION INCORRECT. INSPECT AIR FLOW SENSOR PLATE REST POSITION. LOW FUEL PRESURE FROM WEAK PUMP WILL CAUSE FUEL INJECTORS NOT TO WORK.

Sep 07, 2011 | 1990 Volkswagen Cabriolet

2 Answers

I have a 1990 chevy truck k1500. getting gas to throttle body but not to engine. new fuel pump new fuel filter rebuilt throttle body. do you have any ideas


Throttle body injection? replace the injectors. First check for power to them. 12 volts from one of the wires with key on

Sep 05, 2011 | 1990 Chevrolet K1500

1 Answer

No gas flow through the fuel injectors. need diagram of caborator for 1990 GMC Sierra 4x4


If u have no fuel to any of the injectors the pump is burned out which is located in the tank. If it is fuel injected their is no carb only an intake manifold.

Aug 10, 2010 | 1990 GMC Sierra

1 Answer

My 1990 350 tbi will not start. the fuel is getting all the way to the fuel injecters but wont come out


Make sure you are getting power to the injectors. I have the same,350 tbi. Check the fuses and relays and check the wires at the tbi to make sure one of them is not rubbed through. The injectors have to be getting intermitent power .

Mar 09, 2010 | 1990 Chevrolet K1500

1 Answer

My 1990 Chevy Celebrity wagon 3.1 multiport fuel injection is getting fuel to the rack at 45psi, but is not going through the injectors. Any idea the probable cause?


DO YOU HAVE 12 VOLTS ON INJECTOR WIRE ON ONE SIDE WITH KEY ON? IF SO ARE YOU GETTING SPARK? IF YOU HAVE NEITHER YOU MAY NEED A NEW CRANK SENSOR. VERY COMMON ON THIS ENGINE WHEN THERE IS A LOSS OF SPARK AND INJECTOR PULSE. INJECTOR PULSE(GROUND SIDE)IS CONTROLLED BY THE COMPUTER. IF YOU HAVE SPARK BUT NO INJECTOR PULSE AND 12 VOLTS ON INJECTOR FEED WIRE YOU MAY HAVE A FAUTY ECM(ENGINE COMPUTER)

Aug 31, 2009 | 1990 Chevrolet Celebrity

1 Answer

No injector pulse, no current to the injector


Check the pickup in the distributor as this is the cam sensor. The injectors run of the pulses created while the rotor is turning around. It should be a plastic disk located under the rotor button.

Mar 13, 2009 | 1990 Jeep Wrangler

2 Answers

The truck died,it will fire then dies,its a 1990 with a 351 fuel injection.the fuel pump is working,changed the filter,there is fuel in the line for the injectors


check to see if you have a flapper valve that operates your feul injection if you do you might have to replace it.

Aug 11, 2008 | 1990 Ford F150

Not finding what you are looking for?
1990 Pontiac Firebird Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...