I can't start up my car. I installed a new batary in my remote.Munually I enter my car but I can't start my car.
If you replaced the battery most probably the configuratii-on in the key is lost.Check if you have the code from the key somewhere in your boarddocuments or manual.They discribe how to reset a key with a code.
SOURCE: I have nissan primera 2003.
there is a small cover in passenger side door handle (flips off) for access to car by key only
SOURCE: my car remote control doesnt work . i changed my
Hi , you can initialise the key yourself. Ensure you get into the car and close all doors, Insert the ignition key and turn on the ignition lights , do not start the engine, while the key is still in the ignition press and hold the lock button and remove the key from the ignition , while still holding down the lock button press the unlock button 3 times and release the lock button, the central locking should now lock and unlock, to initiate other keys just hold the lock button and press the unlock 3 times , you do not have to insert the other key into the ignition , you may need to practise this a few times , hope this helps, regards mark .
SOURCE: Ocasionally the car will not start. In this
I have the same problem with my primera, 04 plate. Did you fix it?
SOURCE: how can i open nissan primera's door,
i have Nissan Primera s manual,03 reg. Battery went dead two days ago, today i tried to open the car with my remote key, it didn't respond as battery was totally dead. I tried to open the door manually with the key,it wont open. Can any one help me please.....?
856 views
Usually answered in minutes!
×