When i put the gear on reverse, it doesnt move nor respond. But it moves slowly when its on drive and move good when on 1 and 2
If it's like the 2005 just go ahead and take to shop can't check fluids or add it on the 05 model
Wrong--You can check fluids on All Vehicles What to do think the trans shops & dealers do No sealed transmissions All non sense
×
PROBLEM WITH TRANSMISSION. Check the ATF level. if low add fluid. if fluid level ok, then repair the transmission
SOURCE: 1999 ford 4x4 explorer trans mission problem
Def the shifter cable. My 94 lincoln wont go into park. The shifter wont alloy it I fixed cable and issue solved. Hope that help
SOURCE: 98 Ford Explorer won't move in reverse
Sometimes it may just be the fluid level, if you have drive , drive it around the block a few times, then park it on level ground and hold the brake and go through all the gears slowley, two times. put it in park, open the hood and check the fluid level, the dip stick in the back by the fire wall, take it out and clean it, read the stick. SOME need to be checked in Nutral, if this is the case do so but be carefull that the truck has stopped moving when put in nutral!!! if it is low only put in the right fluid, and a little at a time, while it is still running DO NOT OVER FILL !!!!!!!! Also sometimes it is a SENSOR problem, and in most cases not to hard or costly to replace.
SOURCE: transmission shifting problems
If Drive Selector switch is properly aligned then a shift silonoid might be the problem.
SOURCE: The rear wiper is not working
I work for Ford and these wiper motors are famous for this problem, replace the wiper motor.
SOURCE: 2001 Hyundai - reverse gear is inoperative. The
If I understand you correctly, you have ALL forward gears working, but reverse doesn't?... then the problem is in the transmission itself or the linkage on the trans linkage into reverse.
317 views
Usually answered in minutes!
×