When I turn into my drive way, turning left I lose brakes for a second. When I start to go straight again the brakes come back. Usually the ABS light comes on when this happens. Any idea what it could be?
SOURCE: brakes grindind at low speed
Sounds like your getting abs activation when its not needed. Most likley one of the wheel speed sensors has failed. You do need to have a scan tool to read the live data from the abs module as the problem is occurring to pinpoint which sensor is faulty. The abs light will not come on because the abs module thinks its just working normally. I'm an ASE certified mechanic and have seen this problem many times on various vehicles. You might have to pay somebody to diagnose it, but replacing the sensor it a very easy task. I hope this helps.
SOURCE: 1999 jeep grand cherokee abs light has come on.what to do?
actually it could be something as simple as low on brake fluid. check this and then check to make sure you do not have worn brake pads on the tires this can also set a code when one tire stops quicker than the other
SOURCE: 2001 ford taurus ABS will not light but brake light on
You have a bad ABS module. Had the same problem with my 2000 Taurus. The ABS module is a Bosch 5.3 You can have yours rebuilt for $170 or go to a junk yard and pull one from a 2000-2003 Taurus. Make sure its a traction control module if you have it on your car!
SOURCE: 2003 Sonoma SLS 6 cylinder 4.3L ABS issue
I WOULD NOT KEEP DRIVING IT.WHEN ABS LIGHTS AND BRAKE LIGHTS COME ON.YOU HAVE BRAKE FAILURE. TOW IT TO DEALERSHIP HAVE IT SERVICE.AND CHECK THE ABS BRAKES SYSTEM .BECAUSE ABS BRAKE SYSTEM IS NOT A HOME FIX.BECAUSE THE ABS HYDRAULIC MODULATOR UNIT HAS LOWER FROM HOME POSITION .IN ORDER TO MOVE THE MASTER CYLINDER FROM UNIT.YOU NEED A TECH 2 SCANNER TO DO THE JOB.TO GET ABS BRAKES TO BLEED RIGHT BEST TO GET THEM PRESSURE BLEED INSTEAD OF MANUAL BLEEDING GET LESS AIR IN SYSTEM.THAT WHY SEE DEALER SHIP HAS THE THINGS TO DO THE JOB.
210 views
Usually answered in minutes!
×