At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 1990 Jeep Cherokee that overheated. After replacing the hose I had to replace the battery. The car will crank but it wont start. What part needs to be replaced?
You need to check and see if the plugs are getting voltage/spark. If they are not then check and see that the coil is getting voltage. It sounds like you possibly have a bad coil. Something is causing your plugs to not fire.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.jeepforum.com > ... > YJ Wrangler Technical Forum
Jun 2, 2014 - 15 posts - 4 authors
I ran a few searches here, read the tech sections, checked my hanes manual and so on, still a bit baffled. Was driving my 1995 2.5l automatic ...
Apr 20, 2011 - 4.0L Jeep Wrangler, 4.0L Cherokee and Grand Cherokee. ... Before youstart any of them, take a look at the entire article first. ... engine oil and coolant, a burned head gasket won't be able to keep any of them separated. 3.
Jul 2, 2013 - Blew a hole in radiator hose. Thermostat was stuck n failed. Replaced hose removed thermostat. Car will not start now. It started after hose ...
you said it cranks then you said it wont turn over if it wont turn over you might have get the engine to hot and seized the engine please spesifiy if the engine turns over or not
Hi. Thanks for your question. For issue related to jeep cherokee laredo you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!
Try replacing the wire from the positive battery cable to the small terminal it is attched to. It is the smaller gauge wire that is attched to the battery terminal. Be sure to use the right gauge, don't over or undersize it. I had this problem and it did'nt stop until I changed this. Without this wire in good condition, the starter will crank too slow or not crank at all, mimicking other problems (like bad battery, bad starter , etc.). Post if it works.
×