Question about 1999 Mercury Mystique

Open Question

Mercury Mystique clutch slave cylinder location

Lost pressure to clutch pedal

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chuck943
  • 783 Answers

SOURCE: cant find the fuel pressure regulator on a 2000 mecury mystique

This vehicle is most likely a returnless system,only one fuel line to the fuel rail. If it is returnless the fuel pressure regulator is part of the fuel pump module in the tank.

Posted on Feb 20, 2009

  • 62 Answers

SOURCE: firing order of mercury mystique

What engine size and year?

Posted on Mar 22, 2009

  • 1 Answer

SOURCE: mercury mystique starter location

its a 6 I beleive its a 2.5

Posted on Mar 24, 2009

  • 1206 Answers

SOURCE: Speed sensor location...lost?!?!

the second if one will be on the engine most likely place will be down by the crank pulley.

Posted on Jan 07, 2010

  • 1 Answer

SOURCE: 1995 mercury mystique starter replacement process?

At first, it looks like an impossible task, however if you start by removing the positive battery cable, then unplug mass air flow sensor, carefully remove air filter box and its components from the throttle body. from there you should be able to see the starter better and have more room to work and get it out. You can take the battery right out if you want a little more working space for your elbows. take the wires off the solenoid, sometimes the old studs of solenoid will break due to corrosion. remove the two 13mm bolts that hold the startersome models have one at the bottom also that you will need to access from the bottom side.

Posted on Nov 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CLUTCH WONT WORK


There is a clutch master cylinder,a clutch slave cylinder,and the fluid.If you press on the clutch pedal and there is no pressure you lost the fluid,if either leak from the master or the slave even the hose line,A rule of thumb the master clutch cylinder and a slave are replaced as pair,

Mar 09, 2012 | 2004 Saturn ION

2 Answers

Lost resistance on clutch pedal and hard to change gears also when topping up clutch fluid it does`nt last that much and leaks from slave cyclinder


If the slave cylinder is leaking, replace the slave cylinder. You are loosing hydraulic pressure in the clutch and is the reason why it is not engaging correctly.

Apr 13, 2011 | 2001 Honda Accord

2 Answers

Clutch suddenly has no resistance and car won't shift gears. Fluids were low, have put fluid in the reservoir but still doesn't work. How do you bleed a clutch line?


on the transmission there is a slave cylinder that works like a brake cylinder, when you apply pressure to the clutch pedal a rod inside the vehicle under the dash pushes into a clutch master cylinder, (almost like a brake master cylinder without the reservoir, as the clutch master cylinder works off the brake master cylinders reservoir) the plunger in the clutch master cylinder applies fluid pressure to the slave cylinder,(located down on the trans near the clutch fork assembly) which projects a piston rod into the clutch fork dis-engaging the clutch. To bleed the clutch slave cylinder locate the bleeder screw on the slave cylinder,break loose so it loosens and tightens easily. Check fluid in brake master cylinder reservoir,fill if needed, while bleeder on the slave cyl is closed have a helper push clutch pedal to floor and back 7-8 times, (At first the clutch might stay at the floor, just pull it up by hand or foot and continue) after several pumps with no rest time push pedal to the floor and hold down with foot pressure, at this time loosen the bleeder on slave untill fluid leaks out, watch for air bubbles, close bleeder and repeat untill there is no sign of air bubbles, (make sure to check fluid in the brake master cylinder and keep fill as needed, do not let fluid get less than 1/2 empty as it might **** air and you will have to start over) If this does not bring clutch to operate then you need to check if slave cylinder is reachig its full extension of push rod or not. If it is not then you will have to replace the clutch master cyl or the clutch slave cyl or both as seals are bad and wont hold pressure. Or you need to inspect the clutch fork,the throw-out bearing, or the pressure plate fingers and clutch plate for failure or broken bent parts. I hope it turns out to be a easy fix on that clutching thing.

Jan 14, 2011 | 1995 Nissan Pickup

1 Answer

Clutch pedal goes to floor no preasure filled and bled slave cyl same result


Hi:
If you have bled the system, you are down to either having a bad clutch master cylinder, or a bad clutch slave cylinder. You could eliminate the slave cylinder by removing the line and capping it off, and if you have a firm pressure on the clutch pedal ( don;'t try to push it down, just check for pressure!) then your slave cylinder is bad. If you cap off the line, and bleed the system, and the pedal still has no pressure, then your clutch master cylinder is bad!

Apr 15, 2010 | 2004 Chevrolet Cavalier

1 Answer

I've got a 1998 Mercury Mystique with a 2.5L V6,the automatic tranny .Can I replace the automatic transmission with a manualtransmission? Thank you


Yeah you can but it won't be easy. I would check some salvage yards for one with a stick in it. That way you can find all the parts you will need. Not only do you need the trans, you will need clutch, flywheel, slave cylinder, master cylinder, Clutch and brake pedals, cv shafts, mounts, shifters, shifter cables, and the computer, plus some other parts. I have done some of these conversions, they are not impossible. I have done this to a 2000 BMW 323. I can help you more if you want.

Apr 02, 2010 | 1998 Mercury Mystique

6 Answers

My 1994 ford rangers clutch pedal just lost all pedal


There are two types of clutch actuators. (Mechanical & Hydtraulic)
A. For mechanical type,- Check the clutch cable as
this could be cut from wear and tear. This is easy
to replace. You can find this connected to the
pedal and the clutch lever near the transmission.
B.For hydraulic operated - Check the level of the
hydraulic oil at the cylinder of the hydraulic
actuator under the hood. This actuator is
directly connected to the pushrod driven by the
pedal. If the actuator is leaking, you have buy
a repair kit (Hyraulic clutch repair kit for Ford
Ranger 1994 MOdel.) These items must be
repaired to activate your pedal.

Oct 14, 2009 | 1994 Ford Ranger Supercab

1 Answer

96 pathfinder clutch pedal has lost pressure,


usually when this happen you lost fluid pressure look for a fluid leak at the clutch master cylinder under the hood ,it should be by the brake master ,it has a small plastic tank on top with a black rubber cap or underneath on the transmission there is the clutch slave cylinder it will have a small 2 inch rod that pushes the clutch fork ,look for the rubber boot on it ,see if there is fluid coming out of it ,also follow the clutch fluid lines maybe somthing has damaged one and its leaking !

Aug 08, 2009 | 1995 Nissan Pickup

1 Answer

Clutch 1998 toyota tocoma


Replace master cylinder

Mar 11, 2017 | 1998 Toyota Tacoma

Not finding what you are looking for?
1999 Mercury Mystique Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...