Question about BMW 530
When I put the key in ignition and press the start button noting happens battery is fully charged no battery light or no oil light no management light just no responce
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On your Buick 94.
The problem is the ANTI THEFT SYSTEM..
If you have replaced the ignition switch.
If you are using a NEW KEY, the car won't start.
Because in the OLD KEY, is there a Resistence with a number of ohm's
The computer need the resistence to activate the the signals to operate the vehicle.
OK.. with the New Key and Old Key you can go to any Aloha Smith and they will remove the Chip from the Old Key to the New Key.
And the car must start and running.
But if you are using the Same Key that you have before the repair made.
I recomend to check the 2 Orange wires from the Ignition lock Cylinder to the steering column lower connectors.
Ok I hope this work for your problem.
Any moree info, I will glad to help you.
I'm a Mechanic and have all the repair information for all the cars.
Thank you for use fixya...
Posted on Sep 11, 2008
SOURCE: ignition cylinder won't turn
I had the same problem in a 94' trooper. Basically the Ignition lock cylinder is wore out and you need a new one. Mine wouldn't turn past lock and no matter what I tried it wouldn't turn. You can go on auto zone and find the part, mine was about 61 bucks, it comes with keys and the ignition cylinder. The deal is that to get your new ignition cylinder in you have to get your original turned to off or acc I can't remember. You'll see with your new ignition cylinder that when you turn the key there is a button that can be depressed but only when the key is turned past lock and it also won't depress in start. First, disconnect battery and wait like 30 minutes. So, what you do is take a screwdriver handle and place it up against key and take some pliers or something and beat on it a couple of times, this gets the key in deep enough to where you can eventually turn it. I swear it will eventually turn, once there, take off the top and bottom plastic covers off steering wheel/unscrew electrical wires on back of ignition cylider and other side and you know the button I referred to basically you have to depress that with key in acc or off and it will slide out. If your having trouble finding the button look at new ignition cylinder in comparison to old one and you can see where the depressed button is on side closest to you, you'll see a little hole up on the side of housing that you can depress.
Posted on Apr 15, 2009
did u have the alternator tested to see output get a jump if the car starts takeit to a auto zone have him test the battery and alternator for free
Posted on May 03, 2009
Tips for a great answer:
Mar 07, 2016 | 2004 Mazda RX-8
on Dec 07, 2009 | Oldsmobile Alero Cars & Trucks
on Dec 07, 2009 | Chevrolet Camaro Cars & Trucks
Oct 10, 2014 | 2001 Chevrolet Silverado 1500
Mar 28, 2013 | Cars & Trucks
Jul 07, 2012 | Ford Cars & Trucks
Jun 22, 2010 | Cars & Trucks
Mar 11, 2010 | 2006 Chevrolet Trailblazer
Nov 16, 2009 | 2003 Saturn VUE
Mar 12, 2009 | 2003 Pontiac Grand Am
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: