Question about Cars & Trucks

Open Question

Shogun sport reverse light not working changed switch did not solve problem

Changed switch did not dolve oroblem

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emjem74
  • 162 Answers

SOURCE: reversing lights not work

sounds like it could just be the reverse sensor located on the acctual gearbox under bonnet, you can tell which one it is as it is one of possible two.

Posted on Feb 25, 2009

Ad
  • 52 Answers

SOURCE: fog lights not working

use a test light to check for power do this where you plug in your bulb is no power then trace wires testing in the wires periodically to check for broken wires if everything checks out fine next check the fog light switch.

Posted on Mar 06, 2009

kd6rhd56
  • 400 Answers

SOURCE: 1993 jeep cherokee sport cigarette lighter and

check the fuse box for a blown fuse or shorted wiring going to the radio and cig lighter

Posted on Jul 11, 2009

SQUIRESXX
  • 486 Answers

SOURCE: reversing light on my ford focus (51 plate) dose

the switch is in fact the earth when you select reverse it gronds the wire, so to test take lead off and earth it, there will be a contant live to the bulb with the ignition on, if when earthed the light works the fault is with the switch, which could be an adjustment problem, or a defective switch. if does not work when earthed check the live to the bulb then check fuse

Posted on Dec 06, 2009

  • 360 Answers

SOURCE: recently had clutch replaced and have noticed

If, as you indicate, this clutch replacement was recently done I'd contact the shop that did the job. There is a very good likelihood them didn't properly remount the backup light switch.

Let them have the burden of this repair.

No reason I can think of for you to do it.

Posted on Dec 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My reverse lights don't work, changed bulb and checked fuse but still not working


It could be the switch at the reverse gear is burnt out or you have a broken wire somewhere. The broken wire situation is not fun to solve. You'll need to pinpoint if you are getting power the length of the wire harness.

Jan 31, 2015 | Cars & Trucks

1 Answer

Where is the reversing switch on a mitshubushi shogun warrior


Hi Jan.
The Reverse light Switch is on the Gear box and if I am not wrong is on the right side between the gear box and the transfer box with wires on. Most common thing on Mitsubishi Shogun the reverse light switch is leaking oil and surely you will find it oil wet.

good luck.

Aug 29, 2014 | Cars & Trucks

1 Answer

Mitsubishi 2.5 shogun sport interior fuse box location


Does sombody know where the fuse box is for my 53plate shogun sport equipe as i have no brake lights

Jul 08, 2011 | 1995 Mitsubishi Montero

1 Answer

Mitsubishi shogun has transmission warning light


if the shift is being made and the car is in gear it will not change ,in some cases it is necesary to reverse a few times to allow shifts to occur if this still fails you could have a sticky solonoid ,these are mounted on the r/f inner guard there are two of the next to each other make sure there is vacume at the solonoids as the car will allways fail in 4wd mode it requires vacume to allow it to disengage the front diff on start up,that is why there is a grinding noise if you switch off the motor and free wheel to a stop the front diff tries to engage

Jan 03, 2010 | Mitsubishi Passenger Cars & Trucks

1 Answer

For some strange reason my reverse lights have decided to stay on permantly and my sppedo has stopped working. I have took out all the relays one by one and they still stay on. I have even disconnected the...


there is a tiny switch or button that when you shift into reverse it activates the switch enabling your reverse lights i would def check in the steering colomn or wherever your gear shifter is located! good luck!

Dec 18, 2009 | 1996 Mitsubishi Montero

1 Answer

Reversing lights not work


sounds like it could just be the reverse sensor located on the acctual gearbox under bonnet, you can tell which one it is as it is one of possible two.

Feb 24, 2009 | 2002 Mitsubishi Montero Sport

1 Answer

Fog lights not working


use a test light to check for power do this where you plug in your bulb is no power then trace wires testing in the wires periodically to check for broken wires if everything checks out fine next check the fog light switch.

Feb 23, 2009 | Mitsubishi Montero Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...