Question about 2007 Chevrolet Chevrolet Suburban 1500 LS

1 Answer

Trouble codes stabilitrack and trackion on dash board

Codes u0100 and c0561

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

Most likely its the throttle position sensor. Gm is having a fit with them on the 5.3 engines. What your seeing with the stabilitrac/traction control is common. Try this as a test. Take off the negative battery cable for about 2-3 minutes, let the ECM dump its memory, hook it up and try it. If it comes out of limp mode, its probably the sensor. Unfortunately, It likely will go back into limp-home after a short drive. GM has had a "campaign" on those, and was replacing them free for a while. Good Luck !

Posted on Jun 13, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My vehicle when making a turn will have no power and tracktion controll and stabilitrack lights come on when vehicle gets straight it will then pick up


When making the turn, do you take foot off the gas, if so, sounds like closed throttle issue of some kind? Does it idle ok?
Some dash lites may come on if trying to stall?
I don't know year--make--model? How long since a tune-up? Any applicable trouble codes?

Oct 09, 2017 | Cars & Trucks

1 Answer

2009 GMC Sierra traction control light on


traction control light on . DTC'S - diagnostic trouble codes are stored in ABS control module pointing to the malfunction . Take to a qualified repair shop or to auto part store that can pull these code. DTC C0242 00: Engine Control Module (ECM) Indicated TCS Malfunction
DTC P0856: Traction Control Torque Request Circuit
The electronic brake control module (EBCM) and the engine control module (ECM) simultaneously control the traction control. The EBCM sends a serial data message to the ECM requesting torque reduction. When certain ECM DTCs are set, the ECM will not be able to perform the torque reduction for traction control. A serial data message is sent to the EBCM indicating that traction control is not allowed.
DTC C0561 4B: System Disabled Information Stored Calibration Not Learned
DTC C0561 54: System Disabled Information Stored Temparature High
DTC C0561 59: System Disabled Information Stored Component Protection Time Out
DTC C0561 71: System Disabled Information Stored Invalid Serial Data Received
DTC C0561 72: System Disabled Information Stored Alive Counter Incorrect
DTC C0561 74: System Disabled Information Stored Value of Signal Protection Calculation Incorrect
DTC C0561 75: System Disabled Information Stored Signal Above Allowable Range

Traction Control Off Indicator
The IPC illuminates the traction off indicator when the following occurs.
• The EBCM disables engine torque reduction due to a malfunction and sends a serial data message to the IPC requesting illumination.
• The driver manually disables VSES and engine torque reduction by pressing the traction control switch. The EBCM sends a serial data message to the IPC requesting illumination.

Sep 04, 2017 | GMC Cars & Trucks

1 Answer

Trouble code P0700 & U0100


What make vehicle ? P0700 is a code for transmission problem . U0100 is a problem on the serial data bus or a module on the bus .

Apr 12, 2016 | Cars & Trucks

1 Answer

How do i fix error code u0100 on my 2009 saturn aura xe?


That sounds an awful lot like the ECM is having trouble. Since the model year is nearly 7 years old, it is possible that the ECM is toast or that a wire or two has a corroded connection. Have a look at this information: http://engine-codes.com/u0100_saturn.html

Hope this helps.

Jun 29, 2015 | 2009 Saturn Aura

1 Answer

The light comes on and stay on after the engin is started. StabiliTrack warning light and the StabiliTrack


All dash lights should light with the key on/engine off

ALL dash lights should go out when the engine is running

If you have ANY Light lite,you have a possible system failure
& check for codes,diagnose them,component test & resolve

You can google your codes or Stabilitrac & read up

Read your owners manual

Feb 28, 2014 | 2008 Chevrolet Trailblazer

1 Answer

Problems stabilitrak


Stabilitrack and Traction Control System And Antilock Brake System use the same input sensors except with electronic shocks depending on service trouble code. About 1.5 hour shop rate plus part sensors $150.00 and up Brake modules and computers $500.00 plus

Nov 02, 2013 | Chevrolet Cars & Trucks

1 Answer

2006 VW Jetta code U0100


This problem is with ecu / ecm= engine control computer. These are a common and horrible problem on vw's, particularly on tdi's. The signs in a tdi are when car dash lights come on, but no glow plug light,trans gear lights flash, but car still tries to crank. And hopefully ecu has enough power to out out code u0100= no communication with ecu. Unfortunately the ecu will need to be replacd. The ecu is located under the hood, near and under the wipers. Used ecu with same codes run $50-200. New $1000. If get used one make sure has a return policy. codes must match production quarterly year.

Apr 14, 2013 | 2006 Volkswagen Jetta

1 Answer

Torrent 2007 code C0561 what it is ?


please read the following answer:

http://www.ricksfreeautorepairadvice.com/repair-topics/computers-sensors/trouble-codes-p0404-p0405-and-c0561-on-2007-pontiac-torrent-with-the-3-4l-engine-check-engine-light-on-traction-control-light-on

Jan 19, 2013 | Cars & Trucks

1 Answer

C0561


C0561 sets in a module because another module is telling that module to stop operating this system.For instance a check engine light coming on may turn off the traction control system.There fore the traction control module (ebcm may have set a C0561).You need to check other modules for codes.

Aug 17, 2011 | Chevrolet Silverado 1500 Cars & Trucks

Not finding what you are looking for?
2007 Chevrolet Chevrolet Suburban 1500 LS Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...