Question about 1993 Ford Ranger SuperCab

Open Question

After replacing serpentine belt on 2.3 ford ranger wont start

Ford ranger 2.3 engine turns over great wont start after I replaced the serpentine belt today. I do smell fuel when turning over the engine.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Pattods
  • 116 Answers

SOURCE: 2003 Ford Ranger starts hard.

That sounds like it could be one of many things. Have you ever given the truck a tune up? I suggest the following things first.

New Air Filter
New Spark Plugs
New Plug Wires
Oil Change (and filter)

These are the basic necessities of an engine. Having a dirty air filter, or plugs that are firing weak can surely cause this problem. Try giving the truck a good old tune up and see how it starts then.

Posted on Sep 10, 2008

blueextc3221
  • 15935 Answers

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

89beac5.gif Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 21, 2009

  • 248 Answers

SOURCE: 97 escort wont start with new serpentine belt

check to see if the injectors are working....

Posted on Jul 07, 2009

  • 1348 Answers

SOURCE: ford ranger wont start engine turns and feels like

check for something that shut down your fuel pump relay

Posted on Aug 19, 2009

  • 33 Answers

SOURCE: replacing the serpentine belt on 2004 ranger with 3.0 engine

go to autozone.com and set up a free account. You will then have access to vehicle repair guides and can get all the info and diagrams you need, plus help with troubleshooting! Hope this helps!

Posted on Jan 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the water pump on a 1984 ford ranger 2.8 litr


I just did one on a 94 "almost identicle engine"

This is the way I did it:

drain coolant-remove upper radiator hose-loosen fan bolts '4 bolts attaching it to the water pump'-remove serpentine belt-finish uninstalling the fan- remove 2 bolts securing the fan shroud to the radiator and it should slide out with the fan-remove pump 'be sure to clean the mating surface of the block before sealing with silicone and gasket to ensure it doesn't leak'

reverse the process for installation.


NOTE: if I were you, id replace the timing belt while your in there since the timing cover is nearly impossible to get off without doing this same procedure.

Good luck.

Feb 09, 2011 | 1984 Ford Ranger

1 Answer

I currently own a 1986 Ford Ranger 2.9 V6, RW Drive. Was driving like a charm!! I was driving it yesterday morning, no problems, I parked it after 10 minutes of driving... Last night I went to start it, it...


I just checked you do indeed have a timing belt.
Sounds like the problem,worth the cost and time to change the water pump as well since your digging into the front of the engine anyway.
The tensioner should be good for another 100,000 miles

Nov 25, 2010 | 1986 Ford Ranger 2WD

1 Answer

2000 ford zx2 shreded serpentine belt in half while driving after replacing car wont start


More detail would be helpful. By not start, that could mean the engine rotates but won't start or you turn the key and nothing happens.

Since you do have a 2000 model I can tell you that they had issues in that model year with crank walk. The thrust bearing in some engines was too small and would allow the crank the move side-to-side (transversely) in the block. Some symptoms included knocking, engine dying on turns, timing or serpentine belt failure....

Oct 12, 2010 | 2002 Ford ZX2

1 Answer

Cant get serpentine belt on my truck


Try putting the belt on the alternator then slide it under the idler pulley last.

Feb 23, 2010 | 1994 Ford Ranger Supercab

1 Answer

Replacing the serpentine belt on 2004 ranger with 3.0 engine


go to autozone.com and set up a free account. You will then have access to vehicle repair guides and can get all the info and diagrams you need, plus help with troubleshooting! Hope this helps!

Jan 02, 2010 | 2004 Ford Ranger

1 Answer

Need a timing belt diagram for ford ranger 3.2L engine


Do you mean timing belt or serpentine belt? The timing belt on vehicles only goes on one way - over 2 or 3 pulleys with a possible tensioner holding the proper tension on it.
The serpentine belt is the outer, visible belt that runs the water pump, alternator, power steering pump and air conditioner pulleys with another one or 2 pulleys in there just for fun. There should be a routing diagram for that belt on a decal attached to the underside of the hood - or on the radiator shroud. While it may seem to go on other ways it is crucial to install it correctly. Compare the old belt (if it is available) to the new one for proper length. The correct routing of the proper belt makes sure that all the equipment pulleys are rotating in the proper direction.

Dec 17, 2009 | 1995 Ford Ranger Supercab

1 Answer

Fan belt diagram


I was looking for diagram for the serpentine belt for a1991 ford ranger
extra cab,four wheel drive, 4.0 liter engine but found out I had the wrong size belt. thank you anyway

Oct 20, 2009 | 1991 Ford Ranger Supercab

2 Answers

1997 ford ranger


please include the engine size, that will help to answer as closes we can

Jun 21, 2008 | 1997 Ford Ranger SuperCab

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...