Question about Dodge Cars & Trucks

Open Question

P0345 what is p0345

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dealer just replaced timing belt and water pump and check eng light is on codes are p0345 and p0340 how bad is this and how far can I drive it

P0345 and P0340 are "Camshaft Position Sensor" problems. Hopefully it is only a wire or sensor bad, and not a camshaft improperly lined up when the belt was changed.
Go back to dealer to have the problem fixed. If the motor runs smoothly, it should be okay to drive to the dealer. The mechanic might have left a sensor wire disconnected.

Sep 04, 2017 | Cars & Trucks

1 Answer

P0345 and p0349

Since you didn't post the engine size, or the year, I am taking a stab at your year, which the codes cover several:

P0345-Camshaft position sensor A circuit

P0349-Camshaft position sensor A circuit intermittent

Check the harness to the sensor for any damage, scrapes, dents...something in your harness may be causing the intermittent fault to log in.

Jul 28, 2014 | Ford Expedition Cars & Trucks

1 Answer

Wondering why my MAF is making my car temp fluctuate

well code P0345 has nothing to do with the mass air flow sensor it stands for Camshaft Position Sensor A- Bank 2 Circuit Malfunction

Nov 20, 2012 | 2005 Nissan 350Z

1 Answer

PO345 PO340 codes

P0345 = Camshaft Position Sensor "A" Circuit Bank 2P0340 = Camshaft Position Sensor "A" Circuit Bank 1 or Single Sensor

Mar 29, 2012 | 2007 Ford F-350 Super Duty XLT

1 Answer

My 2005 f150 has a p0345 code and I don't know what that means

P0345 Camshaft Position Sensor A Circuit Malfunction (Bank 2) A code P0345 could mean one or more of the following has happened:
  • a wire or connector in the circuit could be grounded/shorted/broken
  • the camshaft position sensor may have failed
  • the PCM may have failed
  • there exists an open circuit
  • the crankshaft position sensor may have failed
    • Visually inspect all the wiring and connectors in the circuit
    • Check for continuity in the circuit wiring
    • Check the operation (voltage) of the camshaft position sensor
    • Replace the camshaft position sensor as required
    • Check the crankshaft position circuit as well
    • Replace circuit wiring and/or connectors as required
    • Diagnose/replace the PCM as required

Aug 07, 2011 | 2005 Ford F-150

1 Answer

My ODB-ll code reader displays P0345 and P0349 what is the difference between each one .i replaced both camshaft position sensors

The difference between the two is,
P0345--- there's a problem in the camshaft position sensor "A" circuit on bank 2,
P0349--- it's an intermitten problem in the camshaft position sensor "A" circuit on bank 2, which means the problem comes and goes.

Nov 20, 2009 | 2005 Ford Mustang

1 Answer

Dtc p0345

P0345 IGNITION SYSTEM OR MISSFIRE Several causes can provoke this code, from a bad knock sensor, to a broken injector regulator, better to take it to a certified mechanic to have it diagnosed step by step otherwise you can spend a lot of $$$ changing "probable" broken parts till you find the one causing the yellow light.

Jan 05, 2009 | 2004 Volvo XC90

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides