Question about 2002 Kia Sportage

1 Answer

Show me where the circuit for shift lock is located

Have checked all fuses and park sensor..everything is ok need to know where the shift lock circuit is located

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

The shift lock solenoid is under shifter it is usually on the stop fuse ckt

Posted on Feb 24, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to remove center console in 2007 buick Lucerne, stuck in park


Do you know why it's stuck in park ? Do the brake lights work ?
Automatic Transmission Shift Lock Control Description and Operation (Floor Shift)
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
• The automatic transmission shift lock solenoid (serviced as the automatic transmission shift lock actuator), as well as the body control module (BCM) and the engine control module (ECM)/powertrain control module (PCM). The shift lock solenoid is located within the floor shift control assembly with vehicles equipped with floor shift.
• The BCM controls the voltage supply circuit of the shift lock control solenoid. The following conditions must be before the BCM will supply voltage to the shift lock control solenoid.
The BCM controls the voltage to the shift lock control solenoid through the shift lock control solenoid controlled voltage circuit. The following conditions must be met before the BCM will supply voltage to the shift lock solenoid:
• The ignition is in the ON position.
• The ECM/PCM sends an input via GMLAN serial data to the BCM indicating the transmission is in the PARK position.
• The BCM determines the brake pedal is applied according the brake pedal position.
Since the shift lock control solenoid is permanently grounded, the BCM supplies voltage to the automatic transmission shift lock control solenoid, mechanically unlocking the shift lever allowing the driver to move the shift lever out of the PARK position as the solenoid energizes. When the brake pedal is not applied, the BCM turns the control voltage output of the shift lock control solenoid OFF, de-energizing the shift lock control solenoid. The de-energized solenoid mechanically locks the shift lever in the PARK position.
During remote start operation, the BCM will de-energize the shift lock control circuit, locking the shift lever in the PARK position.
Do you know what DTC'S are ?
DTC B2705 Gearshift Unlock Circuit !
The body control module (BCM) controls the shift lock solenoid by providing battery voltage to the shift lock control solenoid. The BCM utilizes a smart driver to control the voltage supplied to the shift lock solenoid. The smart driver monitors the voltage and current flow of the control circuit.

Transmission Control Lever Malfunction (Floor Shift)
Circuit/System Verification
Ignition ON, while pressing the brake pedal, observe the scan tool Brake Applied Output Signal parameter. The reading should be ON with the brake pedal pressed.
? If not the specified value, refer to Stop Lamps Malfunction .
Press the brake pedal, the vehicle operator should be able to move the shifter lever out of the park position.
With the vehicle moving over 5 km/h (3 mph), the vehicle operator should not be able to move the shift lever into the reverse position.

May 25, 2017 | Buick Cars & Trucks

1 Answer

94 merc grandmarkee wont go into park wont start will start if you wiggle in nutral


Park neutral safety switch could be bad , also the shift interlock safety system .
Shift Interlock System A brake/shifter interlock system consists of the following:
  • ignition switch (11572)
  • brake pedal stoplight switch (13480)
  • brake shift interlock module
  • brake shift interlock solenoid assembly (attached to key interlock assembly)
  • necessary wiring
On floor-shift vehicles, the ignition/shifter interlock cable (3F719):
  • locks the floor shift transaxle range selector lever in the PARK position when the ignition switch is in the LOCK position.
  • requires the floor shift transaxle range selector lever to be in the PARK position to turn the ignition switch to the LOCK position.
Condition Possible Source Action
  • Shift Interlock System Does Not Release or Lock Properly
  • Circuitry open/shorted.
  • Blown fuse.
  • Damaged stoplight switch.
  • Damaged shift lock actuator.
  • GO to Pinpoint Test A .

PINPOINT TEST A: SHIFT INTERLOCK SYSTEM DOES NOT RELEASE OR LOCK PROPERLY A1 CHECK ELECTRON IGN FUSE
  • Check Fuse 5 (5A) located in fuse junction panel.
Is fuse OK?
Yes No GO to A3 . GO to A2 . A2 CHECK FOR SHORT TO GROUND
  • Turn ignition switch OFF.
  • Remove Fuse 5 (5A).
  • Disconnect shift-lock actuator connector C203 located to the right of steering column.
  • Measure resistance of the Circuit 1003 (GY/Y) between the correct terminal of Fuse 5 (5A) and ground.
Is resistance greater than 10,000 ohms?
Yes No REPLACE Fuse 5 (5A). GO to A3 . SERVICE Circuit 1003 (GY/Y) wire between fuse junction panel and shift-lock actuator. A3 CHECK POWER SUPPLY FROM FUSE 5 (5A)
  • Reinstall Fuse 5 (5A).
  • Turn ignition switch to RUN.
  • Measure voltage on Circuit 1003 (GY/Y) wire and ground.
Is voltage greater than 10 volts?
Yes No GO to A4 . SERVICE Circuit 1003 (GY/Y) wire between interior fuse panel and shift-lock actuator. A4 CHECK POWER SUPPLY FROM FUSE 28 (15A)
  • Turn ignition switch OFF.
  • Disconnect connector C2016.
  • Turn ignition switch ON.
  • Measure voltage on Circuit 10 (LG/R) and ground.
Is voltage B+?
Yes No GO to A5 . SERVICE Circuit 10 (LG/R) for open. RESTORE vehicle and RETEST system. A5 CHECK WIRE BETWEEN STOPLIGHT SWITCH AND SHIFT-LOCK ACTUATOR
  • Turn ignition switch OFF.
  • Disconnect shift-lock actuator connector C203.
  • Apply brake pedal.
  • Measure voltage on Circuit 810 (R/LG) wire and ground.
Is voltage greater than 10 volts with brake pedal applied and less than 1 volt with brake pedal released?
Yes No GO to A6 . SERVICE Circuit 810 (R/LG) wire between stoplight switch and shift-lock actuator. A6 CHECK SHIFT-LOCK ACTUATOR GROUND
  • Measure resistance of Circuit 57 (BK) and ground.
Is resistance less than 5 ohms?
Yes No REPLACE shift-lock actuator. SERVICE BK wire.

Mar 30, 2017 | Cars & Trucks

2 Answers

Will not come out of park. Button stuck


Automatic Transmission Shift Lock Control Description and Operation.
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
• The automatic transmission shift lock solenoid (serviced as the automatic transmission shift lock actuator), as well as the body control module (BCM) and the engine control module (ECM). The shift lock solenoid is located within the floor shift control assembly with vehicles equipped with floor shift.
• The BCM controls the voltage supply circuit of the shift lock control solenoid. The following conditions must be met before the BCM will supply voltage to the shift lock control solenoid.
The BCM controls the voltage to the shift lock control solenoid through the shift lock control solenoid controlled voltage circuit. The following conditions must be met before the BCM will supply voltage to the shift lock solenoid:
• The ignition is in the ON position.
• The ECM sends an input via GMLAN serial data to the BCM indicating the transmission is in the PARK position.
• The BCM determines the brake pedal is applied according the brake pedal position.
Since the shift lock control solenoid is permanently grounded, the BCM supplies voltage to the automatic transmission shift lock control solenoid, mechanically unlocking the shift lever allowing the driver to move the shift lever out of the PARK position as the solenoid energizes. When the brake pedal is not applied, the BCM turns the control voltage output of the shift lock control solenoid OFF, de-energizing the shift lock control solenoid. The de-energized solenoid mechanically locks the shift lever in the PARK position.
During remote start operation, the BCM will de-energize the shift lock control circuit, locking the shift lever in the PARK position.
Circuit/System Description
The body control module (BCM) controls the shift lock solenoid by providing battery voltage to the shift lock control solenoid. The BCM utilizes a smart driver to control the voltage supplied to the shift lock solenoid. The smart driver monitors the voltage and current flow of the control circuit.
Diagnostic Aids
• Use a scan tool to verify there are no brake pedal position sensor and/or transmission internal mode switch (IMS) DTCs set that could cause the BCM not to provide battery voltage to the A/T shift lock solenoid.
• If the automatic transmission shift lock control circuit is shorted to battery positive voltage, the A/T shift lock solenoid will be inoperative. The vehicle will shift out of PARK without depressing the brake pedal.
Your best bet is have it towed to a repair shop !

Feb 03, 2016 | 2008 Saturn Aura

2 Answers

Can't shift out of park, no brake lights


This is a problem with the brake sensor lockout. Most likely it is out of place or broken and shorting. It is on the brake pedal lever.

Dec 09, 2015 | 2002 Ford Escape

1 Answer

Shift locked in park/2000 nissan xterra se


check battery volts should be 12.5 volts,if yes check see if you have rear brake lights.if no replace brake light fuse.if brake light fuse okay a faulty brake light switch or shift lock solenoid not working,when you apply brake the electrical circuit goes to shift lock solnoid so you can get transmission out of park.shift solenoid located centerconsole located near gear position indicator.

Sep 01, 2012 | Nissan Cars & Trucks

1 Answer

Hi, I have a 96 windstar. One of the wires on the brake light switch down at the brake pedal has broke at the plug and then when I went to repair it touched the steering bar and sparks flew. Once I...


fuse #7 - 15 amp , Fuse #21 - 10 amp.

Maybe you blew solid state module. There is a manual bypass.

Shift Interlock System A shift interlock mechanism prevents shifting the transaxle out of the PARK position unless the brake pedal (2455) is applied. The shift lock actuator is energized when the ignition switch is turned to the RUN position.
  • This locks the shifter in the PARK position.
  • When the brake pedal is applied and the stoplight switch (13480) is activated, the shift lock actuator is deactivated and the shifter can be moved out of the PARK position.
-----------------------------------------------------
  • Shift Interlock System Does Not Release or Lock Properly
  • Fuse.
  • Circuit.
  • Shift lock actuator.
  • Gearshift lever adjustment.
  • Stoplight switch.

----------------------------------------------------------

1c38cb8.gif

Oct 30, 2010 | 1996 Ford Windstar

1 Answer

My gearshift is stuck and will not shift


Check the fuse for the shift-lock mechanism. Also check the brake pedal sensor - do the tail lights come on when you press the pedal? If you need to get the car out of park, pop open the cover and press the shift-lock override button located near the base of the gearshift lever on the console.

Mar 23, 2010 | 2001 Ford Escort ZX2

2 Answers

My shifter locks when i've just turned the car on and try to shift from park to drive. It moves to the right a little bit, but will not move down into reverse. Ideas?


There may be a malfunction in the shift interlock sys.
This sys. keeps the shift from being moved from park
unless the brake peddle is depressed. There are 5 fuse's, directly or indirectly related to the interlock system. Fuse #6 15amp in the fuse box under the hood on the left side. The next 4 are in the fuse box
behind the left side of the dash. Fuse #3 15amp/fuse
#18 15amp/fuse #16 20amp and fuse #4 15amp.
Check these first, before you move on to the brake
light switch, under the dash at the brake peddle.
And the shift lock solenoid, under the console left of
the shift lever. Hope this helps.

Mar 22, 2010 | 2007 Subaru Forester 2.5X L.L. Bean...

1 Answer

Key will not go in off position


It is probably associated with the shift lock mechanism - which ensures the car is in Park when it is started (Will not allow the car to be removed from Park without the key in and also in the "on" position - and some require the brake be depressed as well), and makes you put the car back in park before you can turn it off, or before you can remove the key, thus, either the actuator is bad (Located in the column itsself, or the park position sensor is bad (Usually located close to the shifter assembly itself) - (Or even the brake switch - of which there may be more than one - one for the lights and one for the shift interlock - that would of course need to be checked as well if you vehicle is equipped with such - To determine which one, you would need a voltmeter - locate the park sensor (two wires attached to a mechanism that will complete or break a circuit when park is engaged -- check to see that it is changing state (either opens or breaks circuit) when engaged in Park - if it is, then the actuator located in the column is the problem - If not changing state, then the sensor near the shifter is the problem - Do always keep in mind that there is probably a fuse for the system that needs to be checked first, and that there are other parts to the sytem that ary from manufacturer to manufacturer - eg - the shift sensor may be near the transmission instead of the shifter - I am speaking based on a generic model - import) - best of luck...and Check the fuses wiht the key "on" first ---- Hope this gives you a place to start at least, and if you can read wiring diagrams they'd be a mountain of help - like I said systems vary from Mfg to Mfg....

Aug 28, 2009 | 2004 Cadillac SRX

3 Answers

Shifting problem


press on brake? if so, stil non op, check connection, loose off, if ok FUSE, or bad switch, brake light work ok?

Oct 05, 2008 | 2001 Ford F150 Styleside SuperCrew

Not finding what you are looking for?
2002 Kia Sportage Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...