Question about 2008 Volkswagen Polo Classic
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First of all, basic things to check is the battery. Is the battery ampage sufficient for your car? Re-check connections.
The clicking you hear is the solenoid in the starter motor. Maybe attempt to bridge the connection yourself to rule out solenoid problems.
When it was fitted, are you sure it was properly aligned? Sometimes with these things, it's best to take it out and start again.
Posted on Mar 30, 2009
the cover just pulls off and disconnect breather hose as u lift it.there is about 15 screws to remove then the cover opens
Posted on Jul 12, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
SOURCE: Removing VW polo 2005 battery?
Removing a battery from a Beetle is a bit complex and tricky. I just changed the battery in a 2003 2.0 Beetle. However, the process is very similar in a TDI Beetle. You will need more than your standard generic tool set in order to complete this task. Your tool list needs to consist of a pair of pliers (prefer locking type), a # 20 TORX head screwdriver (You will also need this if you ever plan on changing the Beetle's internal dash pollen filter for the A/C. ), a 10 mm and 13 mm sockets, a long extension and a wobble or universal to allow flexibility in tight spaces, an allen socket for removing the power steering reservoir, and a small adjustable wrench or a 10mm to remove the battery cables. If you are changing the battery you might as well buy a new Air filter since you will need to remove the air box in order to replace the battery. If you do change the air filter you will need a phillips head screwdriver.
1. Pop the hood.
2. Remove the two 10 mm bolts that hold down the air filter box.
3. Undo the clamp that holds the large tubing to the air box using your pliers. Move the tubing away from the box.
4. Unclip hose attached to the back of the air box near the large hose (under it).
5. remove the small breather hose from the air box.
6. Pull air box up and out.
7. Remove snap on cover from top of battery.
8. Remove small snap on wiring cover from back of the battery covering.
9. Unbolt power steering reservoir (next to battery case).
10. Disconnect the battery cables. Positive side first.
11. Remove the 13 mm bolt at the base of the battery along with the hold down clamp.
12. Pull the top wiring away from the battery case and then slide the battery towards the engine.
13. Remove the plastic battery case.
14. Remove the battery
Posted on Oct 07, 2009
most fuse boxes are located either on the pass. side dashboard (near the door or by the center console) also driver side under dash or by right leg. also check under the hood for a black plastic box. then take the cover off. it should be labeled.
Posted on Oct 09, 2009
Tips for a great answer:
Jul 19, 2016 | 2008 Volkswagen Polo Classic
Jul 09, 2016 | Cars & Trucks
Jun 06, 2016 | 2008 Volkswagen Polo Classic
Jun 17, 2015 | 2008 Volkswagen Polo Classic
Feb 10, 2015 | Volkswagen Polo Cars & Trucks
Feb 26, 2013 | Volkswagen Fox Cars & Trucks
Mar 07, 2010 | 1999 Volkswagen Passat
Apr 22, 2009 | 2001 Volkswagen Golf
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: