Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I need to remove the
Pull up on the lower front edge to dislodge the seat from the clamps that holds the seat to the floor. Pull hard, if the seat has never been removed. the clamps will be tight. Once the seat bottom is out, you will be able to see the bolts that holds the rear seat backs onto the body.
Posted on Nov 12, 2008
yes you will have to remove the rear seat. the bottom of the seat pulls straight up and out. the back of the seat has twelve mm bolts holding it at the bottom. once those are removed you lift straight up and out, its hooked at top.
Posted on Oct 15, 2009
SOURCE: How to remove the rear
Pull up the seat cushion with a VERY firm tug upward on each side. There is a pin on each side (right where a person's legs would go about 12-15 inches in from the side of the cushion) that you need to disengage. But the cushion is not bolted down. This can be difficult so often repeated tries are needed.
Posted on Apr 21, 2011
You do need to have a spring compressor. Get the McPherson spring compressor. It is a must. You can rent them at O'reillys auto parts, Kragen, maybe Auto Zone. To get a better understanding on how to change it out, I recommend a chilton 95-97 Camary Manual. Now I can't remember the exact tools you need but the ones I can remember are 22mm socket, 14mm socket, 12mm socket, for the 2 large stubborn bolts I had to impact drill them, and with that 12mm socket don't forget to take the brake line off the strut. When you jack up the car try using its stock jack stand if you dont want to bend the running bars underneath where you jack it up as the car is a unibody jacking it up too high will lift the cars whole side and you only need to jack it enough to take the tire off. The back struts require you to take out your back seat which are also easy to take out.
To remove the rear seat here a link, its on a 2000 but should be generally the same. I learn better with pictures anyway, hope this helps!
Posted on Jun 30, 2011
Tips for a great answer:
Jan 13, 2015 | 2011 Toyota Avalon
Jan 04, 2015 | 2011 Toyota Avalon
Volvo Seat Removal with Heated Seats? http://schematicsdiagram.blogspot.in/2012/07/volvo-seat-removal-with-heated-seats.html
How to Remove Rear seat on Rover 600? http://repairhelpcenter.blogspot.com/2012/01/there-are-3-10mm-bolts-at-back-of-seats.html
How to remove Seat? http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-seat-on-acura-integra.html
These will help.
Nov 23, 2012 | 1998 GMC Jimmy
Jul 12, 2017 | 2008 Toyota Avalon
Dec 12, 2010 | 1999 Toyota Avalon
Apr 14, 2010 | 2007 Toyota Avalon
Mar 23, 2010 | 2005 Toyota Avalon
Oct 15, 2009 | 1996 Toyota Avalon
Apr 08, 2009 | 2000 Toyota Avalon
Nov 12, 2008 | 2002 Toyota Avalon
Nov 18, 2017 | Mazda Cars & Trucks
247 people viewed this question
Usually answered in minutes!