Question about 1990 Mercury Grand Marquis
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: mercury grand marquis
it is on the fender near the battery and is also referred to as the starter solenoid (if you follow the large wire from the positive terminal of the battery at the other end will be your relay/solenoid)
hope this helps!
Posted on Feb 28, 2009
SOURCE: need to change starter
Should be under the engine on the passenger side of the engine right next to the transmission. It is about the size of large size juice can, is normally black with a smaller rounded thing with wires attatched called the soinoid. Most ford soiniods have an unplug plastic connection. You need to unhook all wires, and I think this starter has two bolts while a few have 3. Dont know which engine you have, so I am just giving you the general information. You will need tools like sockets, socket extension, rachet, a hand wrench set will also maybe come in handy as well as a couple of screwdrivers like at least one of each. Normally you will need to jack up and block the car up and put on jackstand as well as setting the brake, putting in park, and blocking all wheels also. You can look on the autozone website in the repair section to help, and you can also buy a complete starter from the parts house which will tell you the bolt locations, what it looks like, etc. hope this helps you, rick
Posted on May 04, 2009
There are eight COPs (coil-on-plugs) to remove. Using a 7mm or 9/32" socket, remove each bolt securing each COP to the intake manifold on top of the engine. Remove all eight COPs, and the spark plugs are underneath. When replacing the spark plugs, use only the proper Ford/Motorcraft plugs, even if they cost twice as much as the aftermarket ones. You will avoid further headaches this way. Hope this helps.
Posted on Mar 30, 2010
disconnect battery,,jack car up,,put jack stand on frame,,take starter bolts out,(may not be easy),,take wires off starter,,hoped it helped,,
Posted on May 08, 2010
Tips for a great answer:
Jan 11, 2016 | 2006 Mercury Grand Marquis
Nov 18, 2014 | 2003 Mercury Grand Marquis
Feb 13, 2014 | 1999 Mercury Grand Marquis
Dec 07, 2013 | 1983 Mercury Grand Marquis
Jul 14, 2013 | 2003 Mercury Grand Marquis
Mar 04, 2013 | 2000 Mercury Grand Marquis
Nov 15, 2011 | 1998 Mercury Grand Marquis
Nov 12, 2010 | 1992 Mercury Grand Marquis
Apr 20, 2010 | 1986 Mercury Grand Marquis
Nov 13, 2009 | 1983 Mercury Grand Marquis
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: