Question about Jeep Grand Cherokee

1 Answer

Cerokee 3,1td startoff solenoid

No fuel peressure

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Which engine, no engine stated means answers will be wrong.
so??????????????????
that above is a statement so will run with that.
so what makes you think there is no fuel pressure??
1: the pressure gage is way low? how low , that you connected.
2: the pump seems silent. (near useless test)
3: pump never gets 12vdc cranking, you must crank.
4: the dribble test fails. (wasted time) (rail drips)
5: the injectors seem all dry, (spark plug tips are all dry)

now EFI 101 (crash course)
THE EFI system will be dead if fuse are blown.
and the ECU never injects with spark errors.
or CKP errors
or CMP errors
or IMMO is active. immobilizer is unhappy see lamp, look at it.

if all that works good, the ASD closes
the injectors fire
and the car starts if the ECU/PCM sees any errors stated above
it drops out in 2seconds <KILLING all injections,.
this is the PCM logic hard coded for fire prevention. all cars have it
with EFI.
does that help.

key factorys, ASD closes, for 2 seconds.
crank with no errors (scan tool shows errors after 5 seconds cranking)
if that works the engine does start.

ask for more tests, i have 3 more that find any bad start.

Posted on Feb 17, 2014

Testimonial: "Tnx,all OK,immo not work!"

  • 2 more comments 
  • _-__-___-_
    _-__-___-_ Feb 18, 2014

    nn year posted but we dont have TD here. but the IMMO might match ours. see next link

  • _-__-___-_
    _-__-___-_ Feb 18, 2014

    http://www.jeep4x4center.com/knowledge-b...

  • _-__-___-_
    _-__-___-_ Feb 18, 2014

    thats the FSM read the IMMO sections

  • _-__-___-_
    _-__-___-_ Feb 18, 2014

    IMMO ,alwasy have a good spark RKE remote entry key.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring diagram or service manual for grand cherokee 3,1td(2000y)


for what? WJ sure.

3.1 liter turbo diesel.
2000.
our books (USA) don't cover diesel , we dont have it. try EU, forum for help.
we have GAS.
the wiki tells me this.
I'd not touch it with out your real FSM on this. from JEEP (your country)
my guess a supplement booklet on this TD? at Jeep.

quote:
The 3.1 litre turbo-diesel on the 1999 Grand Cherokee was developed in conjunction with Detroit Diesel/VM Motori. It has an electronic injection pump, electronically-controlled, vacuum-actuated exhaust gas recirculation, and a special catalyst to control oxides of nitrogen (NOx). Manufactured in Cento, Italy, at 13,000 units per year. It was available in European models and meets the European stage III emissions.
  • Displacement: 3,124 cc (191 cu in)
  • Power: 104 kW (141 PS; 139 bhp)
  • Torque: 367 N·m (271 lb·ft)
  • Transmission: Four speed electronically controlled automatic

Feb 16, 2014 | Jeep Grand Cherokee Cars & Trucks

1 Answer

2000 Jeep Grand Cherokee 3,1TD fuel pressure shutoff valve


FSM time
buy the FSM for your car and engine, and COUNTRY.

Feb 14, 2014 | 2001 Jeep Grand Cherokee

1 Answer

My heater stoped working while driving 2002 cerokee laredo blower works but no heat


Sounds like one of 3 things. It could be low on coolant/anitfreeze, could be the heater control valve not opening to let hot water into the heater core or it could be your heater core is stoped up.

Feb 11, 2011 | 2002 Jeep Grand Cherokee

2 Answers

In central program checking, the computer gives P 0622, P 0753, P 1281 and P 1765. What do those codes mean in Jeep Grand Cerokee Laredo 2000, please?



Welcome to FixYa.com



Check the charging system for PO622. the others please clear codes and see if they come back in. leedavidian_321.jpg



Thank you for Using FixYa.com

Kind Regards, Lee

Your FixYa Expert and Master Technician






Feb 11, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

My 2000 Jeep grand cherokee laredo 3,1td won't shift out of 3rd gear, i can manualy shift it to 2nd, i sometimes got a p0753 faultcode but when i tried to show my mecanic he said that p0753 don't exist,...


First of all i would walk away from this guy, he tells you whatever you feel is the problem as being....NO WAY....and his recommendations are off the hook so seems he is at a loss himself, i would suspect the 3-4 shift solenoid, I would also want to look into the BCM its electrical connectors and grounds as well as a good look at the torque converter lockup.... If you are getting no place fast trying to self diagnose i recommend you having a reputable trans shop give you a diagnosis on the problem first before doing any repairs...in otter words perhaps allow them the first hundred dollars to test and replace anything not too major and then stop and give you a report as to what there findings are.... look inside the shifter console I believe some models have the BCM located inside it...sometimes the connectors get coffee or soda leaking on them and causing corrosion?
Hope this helps.

Sep 17, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Engine will turn over but will not start running


start with the basics check for fuel fire and air check fuel peressure with a gauge should be 50 - 65psi
pull spark plug wire and place near ground if no spark in crank sensor or coil pack ensure air filter is cleaned

on fuel pressure if low check fuel filter pump may be working and cant get to fuel rail but could have damaged pump the fuel pump is controlled via crank sensor signal so no crank sensor signal no fuel

Jan 15, 2010 | 1999 Plymouth Breeze

2 Answers

1991 jeep cerokee belt routing diagram


ece5802.gif
there ya go - i assume you have a/c and p/s. let me know if you dont and i can get you another diagram.

Mar 29, 2009 | 1991 Jeep Cherokee Limited

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...