Question about 2003 GMC Envoy
Maybe the fan is hitting the shroud. Did you check the serpentine belt for fraying or damage?
Posted on Apr 03, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First remove the fan from the clutch. There should be four to six bolts holding the fan to the clutch. The clutch is held on to the pump with four bolts. remove the four bolts to remove the clutch. I've included a pic of the pump to indicate the four mounting holes. Not sure if the link will work.
Posted on Aug 10, 2009
When the car is completely cool,check the electric fan(s) for smooth rotation.
Clean/check/change the thermo sensor,contact and wire.
Excavate air pocket in coolant system / check for head gasket leak
This test will kill two birds with one stone.
MAKE SURE THE COOLANT SYSTEM and ENGINE IS COLD!
RAN THIS TEST IN A WELL VENTILATED AREA ONLY!
You will spill some coolant during this air pocket purge test.......BE KIND TO THE ENVIRONMENT and ANIMAL please clean up after the test!
Put the front end on a pair of ramp or park your car on a VERY STEEP HILL (radiator facing top of the hill) .
Top of the coolant reserve tank
Let it ran for 10-15 minutes.
Monitor for air pockets escaping from coolant reserve tank.
Small amount of bubbles is OK at 1-5 minute mark
After the thermostat open up (after 195 F warm up) at
5-12 minute mark or after high idle you should see less bubbles.
If you do not see any in rush of bubbles then your thermostat may be partially stuck or rusted badly inside the thermostat hosing.
Give the thermostat host few gentle taps.
If you see larger bubbles surfacing after 15 minutes then should do a hydrocarbon (HC) dye test to test for potential head gasket leak.
Let engine cold down and top off coolant reserve tank.
Start monitor for coolant lost
A coolant flush is require every 2 years or 24,000 miles.
I recommend the thermostat that has a relief pop-let to reduce the change of burst radiator and coolant hoses.
Make sure you get a new thermostat gasket,black RTV and fresh coolant for the job.
Please post more information by clicking the comment link on the top right corner.
DON'T FORGET to RATE ME if my tip is helpful to you!
Posted on Dec 05, 2009
Tips for a great answer:
Sep 28, 2016 | Ford Cars & Trucks
Sep 17, 2014 | BMW 330i Cars & Trucks
Feb 16, 2014 | 2002 GMC Envoy
Feb 16, 2014 | 2002 GMC Envoy
Mar 31, 2013 | 2004 Chevrolet TrailBlazer
Aug 01, 2011 | 2005 Buick Rainier
Feb 06, 2011 | 1989 Chevrolet G20
Nov 18, 2010 | 1997 Mercury Grand Marquis
Nov 16, 2010 | 2005 Chevrolet TrailBlazer
Feb 19, 2017 | 2003 GMC Envoy
144 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: