Question about Cars & Trucks
Are you sure its in the transmission? turn off the radio and all other power things and listen closer.
Posted on Mar 18, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello, You remove the headlamp assembly by removing the 3 bolts that hold it in place. The bolts are #1 in the following picture:
Posted on Oct 23, 2008
This is alittle tricky getting to some of the bolts but its not too hard to do otherwise. 2 bolts hold on the starter IIRC they are 13mm bolts. make sure your battery is dissconected by the black cable. then there will be 2 nuts holding on the starter wires. one will be 8mm and the other 13mm. remove them with care cause the wires may and can break. when you remove starter check wires for corrosion or if they look fraigle. repair them if damaged.
then to put it back in is the same way you took it out. should take about 1.5 hrs total if you have never done it before.
Overall i would say skill level 3/10 only cause its trickey getting to that top bolt sometimes.
Posted on Apr 29, 2009
The fuse box is located under the hood. There is component map printed on the inside of the cover. This tells you on your model where the fuse or relay is located
Posted on Jan 19, 2010
Tips for a great answer:
Apr 08, 2017 | Dodge Cars & Trucks
Mar 24, 2014 | 2002 Dodge Grand Caravan
Sep 01, 2012 | 2001 Dodge Caravan
Jan 17, 2011 | 2002 Dodge Grand Caravan
Jun 06, 2010 | 2008 Dodge Grand Caravan
Jan 03, 2010 | 2002 Dodge Grand Caravan
Dec 30, 2009 | 2003 Dodge Caravan
Dec 02, 2009 | 2002 Dodge Grand Caravan
Jun 01, 2009 | 2008 Dodge Charger
11 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: