Question about 1995 Ford Aspire

Open Question

Transmission is making very loud nosies when clutch is not pused in and when pused in the noise stops

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: noise clutch

unfortunately, I would say that the noise does indicate a throw-out bearing that is prematurely worn. Or possibly out of line. If I were in your position, I would take the truck to another mechanic that will give you a written estimate on what he/she "thinks" the problem might be. Then, I would take it to the place where you had the clutch replaced and ask them to "please make the noise go away." I hate do talk bad about mechanics, however it is likely that they did not replace the throw out bearing when they replaced your clutch. I don't know if this has helped you, but I wish you good luck

Posted on Jun 23, 2008

  • 39 Answers

SOURCE: my transmission makes noise until I depress my clutch

sounds like the main shaft bearings within the gearbox itself. i would of said the release bearing but u already changed it. the main shaft doesnt spin with the clutch pedal pressed. check for oil leaks and check the oil level in the gearbox.

Posted on Jun 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replaced clutch master cylinder work find, but grinding nosie bottom inside clutch


I don't fully understand your question but if the clutch is working and just makes a grinding noise when you depress the clutch pedal, it is probably a bad throw-out bearing.

May 28, 2014 | 1996 Chevrolet K1500

1 Answer

My 1992 izusu pickup make weird nosie when i push clutch down


The noise is likely the clutch pressure plate release bearing on the collar of the manual transmission input shaft. To replace this part requires the transmission be removed from the car, a fairly expensive repair. Have this guess of mine confirmed by a local shop before you do any repairs.

Sep 11, 2012 | 1992 Isuzu Pickup

1 Answer

2005 ford focus zx4 ac compresser making noise when ac is turned on


Yes, it could be the ac clutch or the compressor itself.

Jul 08, 2012 | 2005 Ford Focus

1 Answer

My 1993 toyota tercel makes a loud knocking noise and does not go forward when I drive it. what is the problem


it would be your driveaxle on the side that makes nosie and depending on how long the knocking nosie has been knocking you might need to also do your wheel bearing also

Oct 25, 2011 | 1993 Toyota Tercel

1 Answer

I have a 1996 Mitsubishi Galant S with a manual transmission and when i step on the gas pedal in first gear the car doesnt move. When I put the car in reverse, it doesnt move. Prior to this happening my...


For a manual transmission, this means your clutch has completely failed. The loud noise was likely not a belt, but the cluch release bearing. I'll bet this was a screeching noise that reduced or stopped when the clutch pedal was depressed.

You'll need a new replacement pressure plate, driven plate, release bearing and anything else that is found to be worn out when the the transmission is removed to do the job. A garage would need 4-6 hours labour to do this.

SD

Jun 25, 2011 | 1996 Mitsubishi Galant

1 Answer

2001 Dodge Grand Caravan. has been making a loud whining noise for about a week. started slipping last night. seems to get worse when going from a complete stop and when shifting into gears. other than...


MOST LIKELY HAS A PLUGGED TRANSMISSION FILTER.
TORQUE CONVERTOR CLUTCH FAILURE COMMON.
CHANGE TRANSMISSION FILTER AND ROAD TEST.
IF NOISE IS GONE AND RUNS NORMALLY, CHANGE TORQUE CONVERTOR AND RESEAL TRANSMISSION.

May 19, 2010 | 2001 Dodge Grand Caravan

1 Answer

Just had new clutch fitted on 02 ford focus 1.6 now making noise but stops when i press clutch down


A couple of things comes to mind, when you press the clutch you disengage the transmission. When the clutch is not pressed the transmission still spins inside even when it is in neutral. Sounds like a bearing inside the transmission is making noise, did they put fluid back in the transmission? Also another common source of noise is the throw out bearing, it is on the input shaft, it is the actual part that presses against the clutch pressure plate, usually though they make noise when the clutch is pressed and quiet down when released.

May 07, 2010 | 2004 Ford Focus

1 Answer

While driving lifting excelerator pedal a rachiting noise occurs.


If it is a loud buzzing ratcheting noise that stops as soon as you accelerate then it is most likey the front one way clutch sprag in the transmission. I would have a transmission tech listen to it.

Feb 27, 2010 | 1998 Ford Explorer

Not finding what you are looking for?
1995 Ford Aspire Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...