Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: timing marks on peugeot 1.9 tdi
there is a few ways of doing thes the easiest way being using locking pins
you bont have to go and buy a set of locking pins you can use 3 m8 (13mm headded) bolts and a 5mm allen key
there is a hole in the cam pully and 2 holes in the injection pump pully and 1 in the fly wheel
i suggest you lock the fly wheel up first
the hole is located under the starter motor on the front of the block
insert the 5mm allen key and get someone to turn the crank pully clockwise until allen key engages into the fly wheel
the hole in the cam should be at about 25 past
(if it is at 10 to then you neet to remove the pin from the fly wheel and turn the crank 1 full turn)
when the hole is inthe right place you can insert a m8 bolt and wind it in to the head
with this now lined up you should be able to fit the other 2 m8 bolts into the injector pump pully
with this now done your 1.9 tdi engine is timed up
Posted on Dec 07, 2009
We had that problem and it turned out to be a broken engine coil. This is a generic message for a number of faults. You will need to take it to a garage.
Posted on Feb 08, 2013
Tips for a great answer:
Feb 04, 2017 | Peugeot Cars & Trucks
Mar 29, 2016 | 2010 Peugeot 308 HDi
Jan 25, 2015 | Cars & Trucks
Jan 12, 2015 | 2008 Peugeot 308 1.6
Oct 07, 2014 | Peugeot 308 Cars & Trucks
Oct 13, 2013 | Peugeot 308 Cars & Trucks
Jan 20, 2013 | 2008 Peugeot 308 1.6
Nov 22, 2009 | 1991 Peugeot 505
Nov 18, 2009 | 1984 Toyota Celica Supra
56 people viewed this question
Usually answered in minutes!