Question about 1999 Chevrolet Lumina

Open Question

1999 lumina drivers side door will not unlock even with key and it is closed switch will not open all the way jamed

The door is closed and the key will not unlock it. it only turns half way and handle will not engage

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: drivers side door lock

moz-screenshot.jpgmy power lock on drivers side door wont unlock the key wont unlock it either how can i get the door unlocked

Posted on Feb 08, 2009

  • 67 Answers

SOURCE: Driver side lock.

the linkage inside the door must have come undone. Yea you need to take the inside door panel off to see it

Posted on Apr 10, 2009

  • 226 Answers

SOURCE: diver side door will not open with door handle (outsidedoor )

There is a small clip that holds the outside door handle arm (inside the door) to the latching assembly, so the door panel has to be removed to reattach it. Sometimes the little clip is still attached to the handle arm, sometimes they are in the bottom of the door & sometimes you can't find them at all... Rick

Posted on Apr 13, 2009

Kenny_praja
  • 4 Answers

SOURCE: what causes drivers side power sliding door not to

Look at safey neutral swith for being broken. Replace safety neutral switch and your problem is gone. Yellow wire on sliding door control module is control by safety neutral switch which also provides power to back up light.

Kenny

Posted on Sep 29, 2009

  • 11097 Answers

SOURCE: 2007 chevy tahoe driver side door handle will not open door

the linkage behind the handle either the retaining clip broke or popped off need to remove the door panel to check and fix

Posted on Mar 13, 2010

Testimonial: "Thanks I thought it might be a cable or linkage. Much thanks"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I tried to program a new fob for a 1999 Altima. And nothing worked





1.   Close and lock all doors with the driver’s side power lock/unlock switch.

2.   Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter programming mode.

3.   Insert key into the ignition cylinder and turn to the ACC position.

4.   Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.

5.   If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters).

6.   Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.




Make sure you have the right fob for your car.

Nov 15, 2016 | 1999 Nissan Altima

1 Answer

Door is loked on rear driver side want open


Won't open from outside? Won't open from inside? Equipped with power door locks? IF so, and won't open inside/outside, suspect stuck power door lock actuator. Sometimes working the lock/unlock button will make the door unlock. If not, the door will require disassembly from inside to determine what the failure may be. If the door needs disassembly while in the closed position, the paneling/clips may get damaged FYI

Dec 22, 2015 | 2001 Chevrolet Lumina

1 Answer

Opening the drivers door doesnt automatically open the passangers door


Some vehicle locking systems allow a single button press to unlock the driver's side door and require a second button press to unlock the passenger side door. Likewise, use of the key to unlock the driver's side door does not automatically unlock the passenger side.

Mar 25, 2014 | Dodge Stratus Cars & Trucks

1 Answer

Having trouble with keyless remote control on 1993 lexus es300. Replace battery on remote- still not openning doors. Help Please!


Try reporgraming it

1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into the ignition (Do NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.

5. Press any button on remote for a minimum of 1 second.
System should now lock and unlock doors once.

6. Close and open drivers door.

7. Press any button on remote for a minimum of 1 second. System should now lock and
unlock doors. Once to confirm programming, twice to indicate programming failed.

8. Repeat steps 5, 6 and 7 for additional remotes.

Jan 02, 2013 | Cars & Trucks

1 Answer

Replaced batery in key fob and now there is no connection between fob and security system...I can lock and unlock doors with the key and I can start car ...fob doesn't work; does not lock or unlock...


reprogram the remote transmitter. first leave driver door open all other doors closed,key removed from the ignition switch. insert key into the ignition switch,then remove it.press lock and unlock on the vechicle door lock control switch at 1 second intervals 5 times. close and repoen drivers door.press lock and unlock on the vechicle lock control switch at 1 second intervals 5 times. insert key into ignition switch. switch ignition on and off twice to program a remote transmitter code whilst erasing the original codes or three timre to check how many remote transmitters are currently registered.remove key from the ignition switch.system should now lock and unlock.twice to indicate programming mode or one to four times,slowly to indicate number of remote transmitters registered.for the solara press and hold lock and unlock remote buttons together, press lock remote button for a second period of 1 second. system should now lock and unlock vechicle.once to confirm, twice to indicate registration has failed.if required repeat button procedure to program remaining remote transmitters.note to exit programming mode close drivers door or insert ignition key.maximum of 4 remote transmitters can be programmed.if akk failed let dealership reprogram remote transmitters.

May 18, 2011 | 1999 Toyota Camry Solara

1 Answer

Driver side door is jamed shut. ouside door handle and inside door handle broke. can't open door. how do i get the door open or can you take inside driver side door panel off with door closed?


i don't know about taking the panel off with the door closed, but you should be able to remove the inside handle. there should be just one screw holding it in it should be right in the middle usually it is covered with a plastic cap. once you get the handle off manually pull the mechanism and open the door.

Apr 18, 2011 | 1999 GMC Suburban

1 Answer

Driver Door Jamed and automatic lock is working.


actuator rod clip either disconnected or broke-use key to unlock door and open if key dont unlock then rod to door catch disconnected or broken and will have to take off door panel off to manually open and repair

Oct 05, 2009 | 1998 Acura CL

2 Answers

99 chevy lumina driver side door will not open put the key in the door and it gos in a circle


SOUNDS LIKE YOUR LOCK CYLINDER OR ACTIVEATOR CLIP IS FALLEN OFF
YOU WILL NEED TO REMOVE DOOR PANEL
THEN IT SHOULD BE VISIBLE OF WHERE IT CAME LOOSE

Sep 19, 2009 | 1999 Chevrolet Lumina

2 Answers

My door handle wont open my door on the drivers side. I have to roll down my window to open the door from the outside latch. Is it repairable, or do I have to replace any parts?


I have shaved door handles on a 2000 chevy silverado and the drivers side door just recently stopped opening it seems like its completely locked out and the door is closed so i cannot get to the bolts of the latch assembly when i hit the unlock button it unlocks half way and when you go to open the door it relocks itself even if you manually try to unlock the door and hold the lock forward it still wont open

Jul 12, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Jam door locks


How about the passenger side - does it unlock with the key and switch there? Can you open the drivers door with a key? If both these are true, probably the unlock switch on the drivers door is faulty.

Jul 12, 2017 | 1988 Cadillac Sedan DeVille

Not finding what you are looking for?
1999 Chevrolet Lumina Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...