Question about 2006 BMW 325i

Open Question

Brake,check engine,wrench lights on - 2006 BMW 325i

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After starting transmission won't move out of park


It sounds like if this is a car with the brake interlock, meaning the car will not shift from park unless the brake is pressed, there is a malfunction there, some are electronic and it may not be getting power to it especially if there are other warning lights on the dash. It would help if you could give more details, like which lights are on. Most cars with a mechanical interlock will have a cable you can adjust either at the brake cable or at the shifter.

Aug 02, 2016 | 2013 Ford Fiesta

1 Answer

Was driving 2014 f150 when engine died stoped truck after the 2nd time key won't start it tonite Will but when u touch brake to put in gear it stops


Are there any lights lit on the dash , check engine , ETC , yellow wrench symbol , does yours have a message center with reduced power ?

Feb 01, 2015 | Cars & Trucks

2 Answers

2006explorer abs,brake light came on after 4x4 was on new brakes


Check to see if the ABS system wire knocked loose when replacing the brakes.

Feb 13, 2014 | 2000 Dodge Durango

1 Answer

2007 ford explorer wrench, ABS & Traction light


If they all come on at the same time, chances are its a problem the engine computer has found. The wrench is a warning light for the engine and transmission, the ABS and traction control involve both the drivetrain as well as the brakes. So if a problem pops up in one system the computer knocks out the others too.
Have the main computer checked for trouble codes and go from there.

Jun 24, 2013 | Cars & Trucks

1 Answer

2000 saturn brake lights not working


None of the brake lights work , the center high mount lights too ! I can't believe both tail lamp assembly's going bad at the same time ! Wrench light on means codes are stored in the BCM , did your Mechanic check codes .

May 29, 2017 | 2000 Saturn SL

1 Answer

Felt a clunk, engine died, brake light came onin my Isuzu Rodeo, now there is just a clicking sound when I try to start it.


check see if you have12.5 volts at batery if not alternator failed.if alternator good,could have broke timing belt,or internal engine or transmission damage check see if you can turn engine with a large 1/2 socket and wrench if not engine could have seized up.

Oct 21, 2012 | 1998 Isuzu Rodeo

1 Answer

Warning lights come on and off


You need to have delaer pull the codes from the computers on borad. It sounds like an ABS brake issue.

Autozone can pull codes for engine & trans for free, so you could try that first. Wrench light is also for brake, body & chassis, brake issues.

May 08, 2010 | 2006 Ford Explorer

2 Answers

Light on dashboard with car and wrench lit up


This would be your engine check light. First off you need to check all your fluid levels. This includes windshield wiper fluid, brake fluid, oil, transmission fluid if it is an automatic. Remember that the transmission fluid on an auotmatic measuers in pints on the dip stick and not quarts even though it comes in quart bottles. The car must be in neutral and riunning while checking the fluid. Be sure you put the emergency brake on too just in case it ever slipped into gear. Things happen. Check radiator water level and power steering fluid.
With this light on it the computer will drop the engine into safe mode and have less power. If after all the fluids are filled and it is still on then it will be time to take it in and have the mechanic check the computer to tell you what needs repaired. This may cost 75 bucks or more but there is a thousand things that can turn that light on. Unless you can tell me if the car was acting up in any other features prior to the light coming on. If so then let me know and I will try to help you, Good Luck, The Raz

Apr 17, 2010 | 2005 Chevrolet Equinox

3 Answers

Wrench light is on and odometer shows negative mileage


The negative number means the car should have had it's oil changed that many miles ago. Oil life starts at 100% for new oil & counts down every 10%. At 15% the display will always show, which means it's near time to change the oil.

usersteve83, your oil may have been changed but the timer not reset. Reset the timer as shown...
1. Turn ignition to the "ON" position. (do not start engine)
2. Press SEL/RESET repeatedly until the oil life indicator is displayed.
3. Press & hold the SEL/RESET for about 10 seconds until it blinks then let go of the button.
4. Press the SEL/RESET again for about 5 seconds or until the oil life indicator resets to 100%.

Wrench = Maintenance Minder: Symbol letter & number...
Symbol A - Relace engine oil.
Symbol B - Replace engine oil & filter, Inspect front & rear brakes, Check parking brake adjustment, Visually inpest the tie rods, suspension components,driveshaft boots, brake hoses & line (including ABS), all fluid levels & their conditions, exhaust system, fuel lines & connections.
Symbol 1 - Rotate tires.
Symbol 2 - Replace air cleaner element (dusty conditions every 15K miles) & replace dust & pollen filter (behind glovebox) every 15K miles if mainly dusty or city driving.
Symbol 3 - Replace transmission fluid.
Symbol 4 - Replace spark plugs.
Symbol 5 - Replace engine coolant.

All above are taken from the 2006 Civic EX owner's manual.

Dec 02, 2008 | 2006 Honda Civic Hybrid

Not finding what you are looking for?
2006 BMW 325i Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...