Question about 2009 Hyundai Tucson

1 Answer

The belt for the AC was worn out(broken)

How would I replace the new belt?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 42,218 Answers

Release the tensioner pulley or move the ac compressor so that the new belt will fit on. If the ac belt is the front bone then there is no problem but if there are other belts that have to be removed first then release the tensioner pulley for each

Posted on Feb 16, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai Sonata 2003 AC Power Steering belt breads


You may do better to work on your own vehicles

Look for a worn crank damper pulley or & all
pulleys, that the belt your having trouble with
rides on.

No reason at all for a belt to break & not check
why, before installing a new one

What your looking for is alignment & good spring
on tensioner

Sep 02, 2013 | Hyundai Cars & Trucks

2 Answers

When a/c is on there is a load squeel but A/C blows cold


Adjust the drive belt for the ac compressor as the belt is too loose. Check the belt condition and replace if worn.

Apr 01, 2013 | Cars & Trucks

1 Answer

2001 Dodge Ram 1500 4x4 with no heat, no ac, blows room temp air on all fan settings


The upper passenger side firewall has a little black line passing through it . Usually it is broken. There is also a ball on the drivers side firewall behind the hinge

Nov 03, 2012 | 2001 Dodge Ram 2500 Truck

1 Answer

I ust had the water pump replaced. Now my ac has gone out. I know nothing about cars but I do know that I hear a strange noise and the front part of the ac unit was turning and now it's not. It seems...


It is unlikely that the replacement of the water pump and AC failing are related, however ensure that the V belt is correctly positioned and under tension. The AC pulley should be spinning continuously by the V belt. The AC compressor is engaged by an electrically operated clutch within/behind the pulley wheel. If the pulley wheel is not spinning but the belt is sliding over it then you have a seized AC compressor and this will most probably need replacing. If the wheel is spinning but the AC compressor is not working (no cooling) then it is the clutch that is not engaging. This could be due to a worn clutch, failed clutch actuator, broken electrical connection, failed relay, broken fuse a failed interior thermostat (the car thinks that the 'set' temperature has been reached and so switches the AC off). To check, put the AC on the lowest setting and test the voltage at the AC compressor connection. If voltage is being supplied it is likely to be a failed AC clutch. There are lots of AC clutch repair videos on youtube and these should be a great help.

Aug 22, 2011 | 1999 Mercury Mystique

2 Answers

What would cause my ac belt to break on my 97 dodge caravan the pullies move without the belt being attached ,but we did have a big squealing noise when we used the ac..


The squealing is from the crankshaft p[ulley turn the belt on another pulley that is not turning as faster, Let it sqeal long enough and it will burn the belt in half. The pulley on the A/C maybe turning freely, but when you engage the A/C, the compressor itself is not, causing it to squeal. My guess is that the compressor is locking up or you have added to much freon. Having to much freon causes to much pressure buid up and will stop the compressor.

Jul 20, 2011 | Dodge Caravan Cars & Trucks

1 Answer

Every time I turn on the air or heat when the car is running My power steering iseffected and a loud screech? But not when the car not running (blower motor works) I think it is the ac condencer?


you need to replace the serpentine belt and perhaps the belt tensioner. When a heavy load is put on the belt, like turning on the AC, the drag may stop the belt from turning. This would stop the power steering pump from turning causing a hard steer condition. The belt is not gripping the pulleys tight enough. This is due to a worn out serpentine belt or worn out tensioner. If the AC works( cools the car) then replace the belt. If this does not cure the problem then replace the belt tensioner as well.

Nov 19, 2010 | 1998 Plymouth Neon

2 Answers

Battery light turned on. Lost power steering and AC.


You broke your serpatine belt. Needs replacing. It's a $50ish part and easy to do if you have a diagram under the hood of how the belt fits. But if it was "rattling" for a couple of weeks take it in for crying out loud. Let the mechanic look it over to make sure your lack of vechile care didn't destroy anything under the hood.....

Jun 12, 2010 | 1998 Saturn SC

1 Answer

Sqealing noise from nuder hood when car is idling


Most likely a loose or worn belt.
With the engine off, check the belt for excessive play. There should be no more than 1/4" deflection (from center) on the longest run of the belt.
If it is worn - replace it. If it is new - the belt tensioner may be broken.

Thanks for using Fixya - a 4 THUMBS rating is appreciated for answering your FREE question.

Jun 02, 2010 | 2007 Toyota Corolla

4 Answers

How can i stop my AC belt from making noises when my AC is on


The reason your belt is making a noise is either your belt is worn and needs replacing or the belt tension is out of adjustment and needs checking and adjusting.
It is a good idea to replace it anyway specially if the belt has small cracks on the inside.

Jan 13, 2010 | 2001 Nissan Maxima

2 Answers

Ac makes noise after replacing the serpintine belt


Did you check your ac pulley before installing the belt? check for some play on your ac pulley. your ac pulley bearing must have been worn out and needs replacement.

Oct 20, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
2009 Hyundai Tucson Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...