Question about Cars & Trucks

Open Question

Starter motor ford fiesta finesse 2002 1.4 tdci how do you remove it have removed one bolt can't find another

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

markknof
  • 52 Answers

SOURCE: where is the starter motor on a ford fiest located

hii how are you


if it's a 1997 or similar age,jack up the front and remove the bar that holds the radiator up, (you'll have to support the radiator by another means) there's 3 bolts to undo, as well as the 2 electrical connections. There should be enough room to squeeze it past the radiator

Posted on Sep 05, 2008

  • 1 Answer

SOURCE: 1995 Ford Explorer power window motor removal

You have to drill a hole in the sheet metal after you pull off the door panel. There is a dimple where the hole should be drilled. Make sure the hole you drill is big enough to fit the socket. I don't know why ford deigned it like this.

Posted on Oct 16, 2008

alicantecoli
  • 22156 Answers

SOURCE: how to remove a turbo charger from a ford focus tdci

better left to mechanic not easy to do

Posted on Nov 12, 2008

  • 45 Answers

SOURCE: how to remove starter from 1995 ford crown victoria

yes they are very difficult to get to.
its just the top one and some mechanics leave them out after starter replacement.
it sounds bad but true.
i use either a stubby 10 mm wrench and a prybar to break it loose,
or a 3/8 ratchet and a wobble extenion and socket. it has to be the perfect length using different extensions to reach and still fit with the ratchet handle at the back of the starter.
sorry but it can be done.....
no stubby wrench, cut one

Posted on Feb 11, 2009

  • 1 Answer

SOURCE: can't remove starter from 1998 ford f150

can't rerach the top bolt on the starter, any ideas?

Posted on Sep 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removal and installation of starter of 2002 mercury mountainer


Here's the generic starter replacement directions.
Engine should be cool, parked on level surface. Remove negative cable from battery. Remove electrical connections at starter (Sometimes starter may need to be partially removed to access all electrical connections.) Remove any brackets, parts, or accessories that obstruct access to the starter motor mounting bolts. Remove mounting bolts and remove starter. Clean the mounting surface, and install new starter and tighten the mount bolts evenly. Replace wires on starter. Connect battery.
Good luck.

Nov 20, 2011 | 2002 Mercury Mountaineer

1 Answer

How to replace the starter on a 03 Ford Expedition?


SECTION 303-06: Starting System 2003 Expedition/Navigator Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 11/06/2002 Starter Motor adobe.gif Printable View (188 KB) Removal
ani_caut.gif WARNING: When carrying out maintenance on the starting system be aware that heavy gauge leads are connected directly to the battery. Make sure protective caps are in place when maintenance is complete. Failure to follow these instructions may result in personal injury.
  1. Disconnect the battery ground cable.
  1. ani_caut.gif WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so may result in unexpected inflation or deflation of the air springs which may result in shifting of the vehicle during these operations.
    Raise and support the vehicle; refer to Section 100-02.
  1. Remove the starter motor solenoid terminal cover.
    a0044571.gif
  1. Disconnect the starter motor electrical connections.
    a0044572.gif
  1. Remove the starter motor.
    1. Remove the stud bolts.
    1. Remove the two bolts.
    1. Remove the starter.
    a0044573.gif
Installation
ani_caut.gif WARNING: When carrying out maintenance on the starting system be aware that heavy gauge leads are connected directly to the battery. Make sure protective caps are in place when maintenance is complete. Failure to follow these instructions may result in personal injury.
  1. Install the starter motor.
    1. Position the starter.
    1. Install the two bolts.
    1. Install the stud bolt.
    a0044581.gif
  1. Connect the starter motor electrical connections.
    a0044582.gif
  1. Install the starter motor solenoid terminal cover.
    a0044571.gif
  1. Lower the vehicle.
  1. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
    Connect the battery ground cable.

Mar 08, 2011 | 2003 Ford Expedition

1 Answer

02 mondeo 2.0l TDCi starter motor removal


its at the back of the engine ,not difficult but a lot easier with a ramp or a pit ,but it can be done jacking vehicle up and putting a stand under it .Bracket on back of starter to be removed as well .

Jan 03, 2011 | 2002 Ford SVT Focus

1 Answer

Instructions for removing ford focus estate 1.8 tddi starter motor


Disconnect battery.

Disconnect electrical connections to the starter.

Remove the 2 or 3 bolts for the starter.

Installation a reverse of the removal

Jul 08, 2010 | 2002 Ford SVT Focus

1 Answer

Drive belt for ford fiesta finesse 1.3 8v duratec engine 2002. what size of drive belt, dimensions etc.


you can just go to any parts place, give them year,make and model with engine size and they will look up correct belt.

Mar 10, 2010 | 2000 Ford Focus

2 Answers

How to remove a starter on a 2002 ford explorer


  1. Disconnect the negative battery cable.
  2. Properly raise and support the vehicle.
b58491e.gif
Disconnect all wires connected to the starter, including this ground wire on the starter mounting bolt stud

  1. Click to Enlarge

    1. Tag and disconnect the wiring at the starter.
    1. WARNING
    1. When detaching the hard-shell connector at the S-terminal, grasp the plastic shell to pull it off. Do not pull on the wire itself. Ensure to pull the connector straight off to prevent damage to the connector and S-terminal. If any part of the connector is damaged, replace the damaged component.
  • daab222.gif
    Remove the starter motor (arrow) mounting bolts . .

    Remove the starter mounting bolts and remove the starter.

    5c220c9.gif
    . . . then remove the starter—be careful, the starter motor can be quite heavy

    To install:
    1. Position the starter motor against the engine and install the mounting bolts. Tighten the mounting bolts to 15–19 ft. lbs. (21–27 Nm).
    2. Install the starter solenoid connector by pushing it straight on. Ensure that the connector locks in position with a notable click.
    Install the starter cable nut to the starter solenoid B-terminal. Tighten the nut to 80–123 inch lbs. (9–14 Nm).
    1. Connect any remaining wiring to the starter motor.
    2. Lower the vehicle.
    3. Connect the negative battery cable.

    Oct 11, 2009 | 2002 Ford Explorer

    1 Answer

    Will a 2003 mondeo tdci engine fit into a 2002 mondeo tdci


    They should be. The SVT Models stay Very Consistent on the Motors.

    Jan 21, 2009 | 2002 Ford SVT Focus

    1 Answer

    Where is the starter motor on a ford fiest located


    hii how are you


    if it's a 1997 or similar age,jack up the front and remove the bar that holds the radiator up, (you'll have to support the radiator by another means) there's 3 bolts to undo, as well as the 2 electrical connections. There should be enough room to squeeze it past the radiator

    Jul 21, 2008 | 2007 Ford F

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    32 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...