Question about 2001 Buick Century

Open Question

Torqe spec needed torque specs on cv axle bolt,caliper bracket & mount, Thank You

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnjnail
  • 1702 Answers

SOURCE: head bolt torques spec

3.8L V6

cylinder head bolt torque

step 1 37 ft lbs.

step 2 an additional 130 degrees

step 3 4 center bolts an additional 30 degrees

Posted on May 19, 2011

Ad
  • 1252 Answers

SOURCE: I'm looking for torque specs

michael_cass_507.jpgmichael_cass_508.jpgmichael_cass_509.jpg....

Posted on Jul 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque specs for brake calipers on a ford explorer sport front calipers


  1. Torque Specs For F250 Caliper Bolts - Diesel Forum - TheDieselStop.com

    www.thedieselstop.com > ... > 1999-2007 General Questions Jan 13, 2009 - 3 posts - ‎1 author
    Does any one know what the caliper bolts torque specs are? ... Disc brake caliper pin bolts - Excursion, F-250/F-350 with Ford and Dana axle ... Torque specs for front brakes
    5 posts
    Mar 12, 2009
    05 F250 brake torque specs please
    6 posts
    Aug 22, 2007
    Brake caliper torque specs
    5 posts
    Jul 14, 2007
    Front brake Caliper Bolt Torque
    6 posts
    Apr 25, 2005
    More results from www.thedieselstop.com

Jul 11, 2015 | 1998 Ford Explorer

1 Answer

How do i repla


replace front axle shaft you need to loosen axle nut with vechicle weight on the wheel just unloosen axle nut dont take axle nut all the way off just loosen it enough first remove hub cap to loosen axle nut.once loosen then raise vechicle remove wheel tire.you need to remove loosen brake caliper bolts just move brake caliper out of way support caliper piece of wire dont have to disconnect brake caliper hose just move it aside let it hang with a piece clothe hanger or piece or cord dont hang caliper by brake hose will damage brake hose.you need to remove brake caliper mounting bracket.go ahead remove axle nut.you have to remove steering knuckle bolts pull steering knuckle out of the strut bracket.you can remove front axle shaft by using large pry bar to the inner cv pry inner cv joint use a little leverage front axle should pop out.when you install new axle shaft push it in place until you hear it snap in place try pull by hand make sure half shaft in place. when done axle nut torque is 191 ft lbs.strut bracket bolts torque at 133 ft lbs.if this is your first time working on vechicle let a garage do the job.but buy the new shaft then take it with you for garage to replace be cheaper take own parts help cut down costs for part just pay for labor.

Apr 05, 2012 | 1994 Chevrolet Beretta

1 Answer

I need to know the torque-specs on the bolts for the CV shaft on a 1993 90 s. I need both the specs for the 6 bolts that hold the cv shaft to the transmission, as well as the 1 big outer-spindle...


Axle shaft bolt should be torqued to 147 Ft Lbs plus 1/4 turn.

The six CV joint bolts should be 59 Ft Lbs.

Ball joint nut should be 48 Ft Lbs

Hope this helps.

Sep 08, 2011 | 1993 Audi 90

1 Answer

I need to know how to replace the hub bearings on my grand am


The front wheel bearings on this car come as a sealed unit inside the wheel hub.
things you will need to replace them
-torque specs for your cars axle nut, hub retaining bolts, brake caliper mounting bracket bolts, and wheel lug nuts.
-a socket set
-a breaker bar
-a axle nut socket
-a c-clamp
-a jack
-two jack stands

To complete the job follow these steps
1) remove the hub cap/wheel center cap
2) remove the axle nut cap (use the tip of a small flat screwdriver to pry up one edge, pull it off)
3) remove the cotter pin from the end of the axle shaft
4) using a breaker bar style wrench (non-ratcheting socket wrench) with a helper pipe slid over the end to increase leverage use an axle nut socket to loosen the axle nut without removing it.(these are torqued pretty tight and can be stubborn, don't be afraid to use a generous amount of penetrating fluid).
5) once the nut is loose, loosen the wheel lug nuts
tip: doing steps 4 and 5 is made easier with the weight of the car on the ground to keep the wheel from spinning while you loosen the nuts.
6) jack up one corner of the car, and support it with a jack stand. lower the jack to rest the weight of the car on the jack stand, then lift the jack back up to contact the cars jacking point, without taking the weight off the jack stand. leave the jack in place as added support.
7) remove the wheel
8) remove the brake caliper from the hub (if you remove the caliper mounting bracket with the caliper still attached as a unit it's only two bolts to remove it together) hang it from the strut spring with some heavy wire or a metal clothes hanger being sure not to pinch or kink the brake line in the process.
9) remove the brake disc/rotor
10) locate the wheel speed sensor (a small electronic box located on the back side of the wheel hub) a small bolt secures it to the hub, remove the bolt and move the sensor to the side out of your way.
11) locate and remove the three hub retaining bolts (reachable from the rear of the hub)
12) remove the axle nut and use a jack stand to support the axle shaft
13) use a "soft blow" hammer (if possible) to tap on the back side at the outer edges of the hub working your way around in a circle so as to drive the hub out of its housing/steering knuckle evenly. As the hub comes out of the housing/steering knuckle the axle will want to slide with it, in turn pulling the axle out of the transmission. try not to let this happen. if necessary tap lightly on the end of the axle shaft to free it from the hub, once the hub comes loose remove it. this is where supporting the axle with a jack stand comes in handy. try not to allow the axle to scratch the hub mating surface.
14)clean the cavity that the hub came out of, remove the axle shaft support jack stand as you slide the new hub into place lining up the axle and the holes where the hub retaining bolts go (if you just shove it in, it can be impossible to turn it to line up the bolt holes) be sure that it is seated tightly against the steering knuckle, and that the axle is all the way into place. put the axle nut on but do not tighten it yet
14) replace the hub retaining bolts and torque to specs
15) replace the wheel speed sensor
16) replace the rotor/brake disc
17) replace the brake caliper and mounting bracket unit, this may require you to spread the brake pad pistons (this is easiest with a c-clamp slowly squeezing the piston open so as to not create too much pressure in the brake line or master cylinder). if a c-clamp is not available a large pair of channel lock pliers can do the job. once its in place, torque the caliper bracket mounting bolt to specs
18) raise the car off the jack stand, tighten the axle nut to snug and replace the wheel, remove the jack stand and lower the car to the ground.
19) torque the axle nut to specs
20) replace the axle shaft cotter pin and axle nut cap
21) torque the wheel lug nuts to specs
this should complete one side so switch your tools and equipment to the other side of the car and repeat the process. i hope this helps

Jan 05, 2011 | 1996 Pontiac Grand Am

1 Answer

Need torque specs for brake caliper bracket bolts.2000 grand prix


Hello and welcome. here is the torque specs for the bolts.

Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
caliper brake bracket bolts torque to 180 n.m or 133 ft.lbs

Jul 26, 2010 | 2000 Pontiac Grand Prix

2 Answers

Brake job torque spec


Caliper bolt 25 ft lbs/ caliper bracket bolt 79.6 ft lbs

Nov 13, 2009 | 2005 Honda Civic

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

Need the correct torque specs for 2004 silverado 1500 calipers


  • Tighten the 2 brake caliper mounting bolts to 108 Nm (80 ft. lbs.) . Caliper Mounting Bracket to Knuckle, Front (15 series) 175 Nm (129 ft. lbs.) Caliper Mounting Bracket to Knuckle, Front (25/35 series) 300 Nm (221 ft. lbs.) Brake Caliper Mounting Bolt Rear (15 series) 42 Nm (31 ft. lbs.) Brake Caliper Mounting Bolt Rear (25/35 series) 108 Nm (80 ft. lbs.) Caliper Mounting Bracket Bolt Rear (JC5/JH5) 200 Nm (148 ft. lbs.) Caliper Mounting Bracket Bolt Rear (JH6) 165 Nm (122 ft. lbs.) Caliper Mounting Bracket Bolt Rear (JH7) 300 Nm (221 ft. lbs.) Caliper Mounting Bracket Bolt Rear (NYS) 200 Nm (148 ft. lbs.)
    hope this helps
  • Mar 28, 2009 | 2004 Chevrolet Silverado

    Not finding what you are looking for?
    2001 Buick Century Logo

    Related Topics:

    13 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8518 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...